Plaxit 150 Data Sheet

[Madox Valdivia]

AcousticPlaster is composed of a retarded gypsum, perlite & selected aggregates, and special additives. It is supplied as a dry powder in pre-weighed bags ready to use on-site, which requires only the addition of clean water to produce a cohesive mix. Acoustic Plaster is a high-quality product and provides sound and thermal insulation properties.

For manual mixing, add to the mixing container 12-13 liters of water for each 25kg bag of Acoustic Plaster, or 12-14 liters/25kg bag for hopper gun machine application. Add the powder to the water and mix with a mechanical plaster mixer or low-speed electric drill fitted with a suitable paddle for 3-4 minutes until achieving a uniform, lump-free consistency.

When required, add 1.0 liters of Vetonit Bond 2 to the mixing water and adjust the water requirement accordingly for each 25kg bag. Follow the same mixing procedure as above. Use the mixed material within 30 minutes. Do not add water once the mixed plaster mortar starts to stiffen or harden.

When the plaster stiffens lightly, treat the surface to a smooth level to eliminate all traces of protrusions and undulations. Let the plaster set for about 30 min. Using a wet sponge, wipe the surface to a creamy smooth finish. For colors other than white, spray Vetonit Finish WR's desired color at 2mm thick after Vetonit Acoustic Plaster cures for 7-days.

Acoustic Plaster is alkaline; avoid direct contact with eyes or skin. It is recommended to use protective gloves and goggles during application. Any skin contact should be wash with soap & water. In case of eye irritation, immediately wash with a copious amount of clean cold water. Seek medical advice. Acoustic Plaster is non-flammable.

Saveto endeavors to ensure that any advice, recommendations, information it may give is accurate and correct. It cannot accept any liability either directly or indirectly arising from the use of its products because it has no direct or continuous control over where or how its products are applied, whether or not following any advice, specification, recommendation, or information given by us. Saveto has the right to change any of the technical datasheets' specifications upon its discretion without prior notification.

Hard copies of TDSs are printed once or twice a year. Our technical data sheets are continuously updated as per R&D improvements and new 3rd party testing; kindly refer to our website for the latest updated TDSs.

3a8082e126