Discus Sailplanes

Hello dear members, Im offering tailor made glider simulators, please check the link below for videos

Hi, I am the Flarm agent in Australia. You can use remote aerials. The cables and aerials are cheap

Hi, Is any one aware of a braking system for the older Duo Solo engines as a retrofit?

Not a good thing when you have unidentifiable mystery noises. Do you feel the clunk in the stick?

I have been using LifePo4 batteries from Bioenno Power for about 4 years now. Great battery life so

I have a Discus B with the mylar seals on the bottom of the ailerons. When I bought the ship, it had

Can I get the entire assembly of the drain out through the root rib or will only the bellows come out

Todd Robinson may be selling his CS. I've forwarded your contact information to him. The plane is

Sorry I can't be much help. not a reasonably competent person. ;-) It was already done when I got

The cable on my rudder pedal adjustment somehow became unattached (it's unattached forward of the

away with a great deal before now Fm afraid its given them a rather high opinion of i sent you a

Is it hard to convert a Discus B Instrument panel to a lifting Panel... Where would you be able to

Where is your CG at? Further aft will aloe for the same pitch and slower speed. Alfonso Ossorio 720-

Just installed the Brick in my D2a and can't wait to fly with some other Flarm equipped gliders.

Rick, You can also add a couple more ah's by using the Powersonic 12v 10ah batteries (actually

Clay, I bought the IMI wing wheel from Wings and Wheels last Summer. It was easy to adjust to my CS

Problem solved! First, the part is from Magura, and the part number is M122000 7/8". Also

Thanks Glen. Do you have a D1 or D2?

PM me. kirkwoodproperties at sbcglobal dot net Scott On Saturday, October 27, 2012 11:03:14 AM UTC-5,

I installed a fin transponder antenna according to the manufacturer's drawings in my Discus 2b on

With rudder pedals adjusted towards the front, there is enough slack in the cable for the handle to

PF (rented for contest) fit fine on top of glareshield in my CS. Antenna just clear the canopy (I had

I need the measurement from the trailing edge to the turbulater down stream of the dump valve on a

Today I rigged my CS using the tape on top of the port wing and it worked like a charm. Thanks. Bob

Seems to be ~49:1. I have Cc'd Tony Firmin, also a D2cT owner, and an aerospace engineer; he may

I bought one from Tom Knauff perhaps 10 years ago, On Mar 5, 12:55 pm, Bob <rethompso...@verizon.

Don, I know #77 very well. FYI the brake has undergone the Vintage Break treatment. This did make an

Worked fine except that the enclosed rivets didn't fit the holes in the new plates. I had to

Just registered for this group. I will be a lurker, as I own a V2C, not a Discus. If it is indeed

I think this deturbulator stuff is a bunch of snake oil. On Jan 9, 6:27 am, Kevin N <kevin.ne...@