Honda Generator 7 Kv

0 views
Skip to first unread message

Randell Magtoto

unread,
Aug 5, 2024, 6:05:26 AM8/5/24
to sforesralpe
Smartelectronic fuel injection technology increases fuel efficiency, eliminates the engine choke, and reduces fuel associated carburetor problems. And of course, the reliable Honda GX390 engine is designed for long life and superior performance.

Honda's exclusive My Generator smartphone app offers remote generator operation and monitoring with impressive performance and unmatched convenience. The app includes wireless start/stop, operation monitoring, and service reminders, utilizing Bluetooth connectivity.*


So quiet, your neighbors will thank you. The EU7000iS operates at 52 to 58 dB(A), which is less noise than a normal conversation. This makes it ideal for supplemental RV power, powering outdoor events, and any other activity that requires quiet operation.


Thanks to our exclusive Eco-Throttle System, the EU7000iS offers great fuel efficiency. Runs between 6.4 to 16 hours on a single tank, depending on the load. This makes it great for overnight power.


Honda's inverter technology means stable, clean power in a smaller, lighter package. The precision of Honda's inverter technology ensures our inverter generators produce power that is as reliable as the power you get from your outlets at home.


Choose between using both 120 and 240 Volts, or 120 Volts only. This allows for the total generator output to be available through any of the 120 volt outlets, limited only by the capacity of the individual outlet. This enables you to power units with larger wattage requirements.


We and third parties use cookies and similar tools to enhance and track your experience on our Sites, conduct analytics, and personalize marketing to you. By using the Sites, you agree to our use of these technologies. For more information, visit the Cookies section within our Privacy Notice. To manage your cookie preferences click here.


Searched the forum for this subject and did not find anything on it thus far. Recently purchased the Honda EU 22001 and its companion for some boondocking we'll be doing this weekend. Owner's manual says not to use the eco-throttle for 'high energy using appliances'. Not sure what that means - and/or how to qualify. Best I can tell, I should be able to hook the two units together, turn the eco-throttle to 'on' on both units, and be good to go. When the AC powers up [we do have the soft start and solar set up]...the gens do their thing and we're good to do.


One thing to understand when you shut down a Honda with that big rotary switch. It kills the spark and also the fuel supply at the same time. When you have the engine turning full rpm, somewhere around 3600 rpm I think, it stays spinning for quite a few revolutions. This sucks raw unburned gas from the carb into the cylinder. This tends to flood the spark plug and it also washes away oil from the cylinder walls. Not especially good.....


My Yamaha 2400 has a separate fuel shutoff, which I really like, since I can turn off that gas valve and let it run until it dies, draining the carb (mostly), and then turn off the ignition. It starts way easier the next time than my EU1000i ever did, usually with a single pull. The Honda rarely did that.


You may find it better to run just one generator and leave the "Eco" off, if running the AC. The AC cycles occasionally and the generator will be happier if it is already up to speed for a high amp starting load like the AC. But you can't be running the Microwave at the same time if you do this. Also, generators lose about 3% 0f their capacity per 1,000 ft of elevation, so if you are at a higher elevation, you'll have to run both generators. Eco is nice, but if you are in the trailer with the AC running, you probably won't hear the generator, so it won't need to idle down during the normal cycling of the AC. And the fuel savings will be minimal with Eco in that situation, so I don't know why you would be interested in using Eco mode.


The Easy start went through a "learn" cycle when it was installed. This gave it a chance to understand your generator, at the elevation you were at, and with the generator you'd be using. If there is some abnormality, you might have to do that again.


I don't know why you'd want to run both generators if they are not needed. And they should not be if you manage your loads or are at a lower elevation. Don't run the microwave with the AC on, try to have your batteries mostly charged before using the AC, etc.


I find it hard to understand how a place could be fun to visit if I had to sit inside a closed up trailer all day, with two generators running and the AC blasting. And I would not want to leave the trailer and go do something with all of that going on. Pets left inside, for instance, could be in trouble if there was a generator problem while you were gone. And then there are the other campers in the area that get to listen to your generators. I would do whatever it took to get away from dual generators at full throttle from a nearby camp.


Since you mentioned pets inside and the possibility of the AC going off, let me share a gadget shared with me by KountryKamper - SensorPush. With two monitors, the Gateway, and internet connection using my Verizon Mifi Jetpack8800L, I can monitor temp and humidity inside refrigerator and at the dinette table from any remote location using a iPhone app. The gadget stores data in the Cloud (no service required) so able to see trends. Very fun gadget and allows monitoring Oliver temps remotely.


*Would have LOVED to run only the main 2200i generator, however even at full throttle it would kick off once the AC powered up. We tried using the bonded ground plug...and then moved to over-riding the surge protector. Either way...one unit wouldn't cut it.


*Finally, ran both units; full throttle; overrode the surge protector. ONLY THEN did everything work fine. Of course - this creates a lot of noise, costs gas, and is a big problem if one forgets to turn the surge protector back to normal before hooking up to shore power. But it was the only way to get it working without a problem.


*In my opinion, there is something wrong with the easy start on the A/C. Have been in touch with Jason at Oliver and I think we are in agreement the only way to know for sure will be to schedule a time to bring the camper with the generators to test it out and see what is going on.


*To Raspy's point about running two generators; stuck inside the unit; leaving the unit with all that going on, etc.: On this particular trip we went to my son-in-law and daughter's home in Columbus, Ohio - where they have 40 acres of land. We set the camper up with the generators to see how all of this would go. Because we were not in a campground, noise was not an issue. We didn't leave the units to run all day...only at night when we would be there. And we keep the dog with us pretty much at all times :). We truly believe we can get to the point where one generator will do it, but need to further explore what is going on with the easy start.


*Additionally, we learned enough about the process to say it makes most sense to 'boondock' in the spring or fall when the temps are much cooler. Use solar for all our needs; manage the power accordingly; use propane for heat at night - and all good. Bring the generator only as a backup. This way neighbors won't be frustrated, we enjoy peace and quiet, etc. In those occasions where it's hot...try to use only one unit assuming easy start gets figured out.


If the A/C runs fine on shore power, then that's almost certainly the case. I had similar symptoms on mine - overload on compressor startup, but otherwise it would work. In my case, Oliver actually forgot to install the easy start, which I'm at least 99% certain was why it wasn't working.


I had the exact problem with mine. What I did to correct this issue was went through the starting procedure again and now using the Honda 2000i it works like a charm. It took a good while before even thinking about the start up procedure. If you have not tried that I would give it a shot. Using one 2000 w gen works well with the Honda on eco mode, I just get the impression the thing is working hard.


geO - Not sure what you mean by going through the 'start-up' procedure again. At first, I tried the Honda 2200i with the bonded ground plug; AC didn't work [in full throttle mode]; removed the plug and overrode the surge protector...still didn't work; added the companion generator with the bonded plug and 'normal' surge operation...didn't work. The ONLY way i could get the A/C to work would be to run both generators/full throttle/bypass the surge protector. Are you saying after all of that maybe all i need to do is try one more time with the single generator with the bonded ground plug?


Corcomi - I share your pain! At the very least this will require my taking a couple half days off work for the trouble. It will be a bit frustrating if i learn someone forgot to test...or worse yet install the easy start altogether. But...we'll just have to see.


Mossemi - Never could get the A/C to run without both generators at full throttle and bypassing the internal surge protector in the camper. Easy start was ordered through Oliver; picked up the unit in April. Last weekend was the first time we tried boondocking where all of this has showed up.


Wow. Well - I have the unit scheduled at the Oliver plant next Thursday. I'll probably let the experts see what is up...but from these links it certainly appears the 'relearning' aspect could be a key part of all this. We'll let Jason and his team see what's up and i'll report back.


Hello friends! About 3 months ago I mentioned an issue with the EZ Start / A.C. unit on a 3 month old unit [#453/Elite II]. In order to boondock we had to use not one, but two Honda generators at full blast to keep the A/C running. We knew we'd have to run one unit...didn't expect to have to hook up the tandem.


Anyhow. All fingers pointed to the EZ Start. In the end, it was the A/C unit that needed replacing. Jason at Oliver explained the whole thing, but what I seem to remember most was the unit was simply pulling too many amps and didn't allow the EZ Start to be effective.

3a8082e126
Reply all
Reply to author
Forward
0 new messages