Log file sflowtrend

[David Hardaker]

I installed sflowtrend on Raspberry Pi3 using the .deb package.  The install log reads ok, but when I start the sflowtrend service, it appears to be having an error as the status immediately goes back to "stopped".  Is there a log file for sflowtrend where I can see what error is being generated?

[Stuart Johnston]

It’s probably the memory configuration that’s the problem, it will be trying to reserve more than is available. You can tweak this using the instructions at http://inmon.com/products/sFlowTrend/help/html/installation.memory.html - I would try something like 

-Xmx768m

first, if that works you could gradually increase it. 

If that doesn’t work, post back and we can try some additional logging.

Stuart

On 30 Sep 2017, at 13:44, David Hardaker <hardake...@gmail.com> wrote:

I installed sflowtrend on Raspberry Pi3 using the .deb package.  The install log reads ok, but when I start the sflowtrend service, it appears to be having an error as the status immediately goes back to "stopped".  Is there a log file for sflowtrend where I can see what error is being generated?

--
You received this message because you are subscribed to the Google Groups "sFlowTrend" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sflowtrend+...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[David Hardaker]

Thanks Stuart!  After adjusting the memory, the service started OK.  I will fiddle with the memory to find the upper limit, but as this is just a small test lab, I don't envisage I'll be needing too much.

david