Vag Com 311.2 Crack Chomikuj 3

0 views

Skip to first unread message

Message has been deleted

Kym Cavrak

unread,

Jul 11, 2024, 2:10:54 PM7/11/24

to sescicalfe

Vag Com 311.2 Crack Chomikuj 3 - How to Install and Use Vag Com 311.2 with a Cheap eBay Cable

Vag Com 311.2 is a software that allows you to diagnose and modify your Volkswagen, Audi, Seat or Skoda car using a standard OBD-II cable. However, the official software requires a license and a compatible cable that can be expensive. In this article, we will show you how to install and use Vag Com 311.2 with a cheap eBay cable and a crack that bypasses the license check.

vag com 311.2 crack chomikuj 3

Download Zip https://urlcod.com/2ySzVh

What You Need

A Windows PC with an available USB port.

A VAG-COM compatible OBD-II cable. You can find them on eBay for around $10.

The Vag Com 311.2 software with crack and gen. You can download it from [this link].

How to Install Vag Com 311.2

Extract the downloaded file to a folder on your PC.

Connect the OBD-II cable to your PC and install the drivers if prompted.

Run the setup.exe file in the folder and follow the instructions to install Vag Com 311.2.

After the installation is complete, do not run the software yet.

Copy the file VCDS.exe from the folder Crack to the installation folder (usually C:\Ross-Tech\VCDS).

Run the file VCDS.exe from the installation folder.

You should see a message saying "VCDS Release 311.2-N". Click OK.

The software will ask you to register. Click No.

The software will ask you to enter a serial number. Run the file Gen.exe from the folder Gen and copy the generated serial number to the software. Click OK.

The software will ask you to enter an activation code. Run the file Gen.exe again and copy the generated activation code to the software. Click OK.

The software will say "Thank you for registering". Click OK.

You have successfully installed Vag Com 311.2 with crack and gen.

How to Use Vag Com 311.2

To use Vag Com 311.2, you need to connect your car to your PC using the OBD-II cable. Make sure your car is turned on but not running. Then, run the software VCDS.exe from the installation folder and select your car model from the list. You can then access various functions such as reading fault codes, clearing fault codes, measuring values, coding, adaptation, output tests, basic settings, etc. For more details on how to use Vag Com 311.2, you can refer to [the official manual](https://www.ross-tech.com/vcds/tour/index.php).

Disclaimer

This article is for educational purposes only. We do not condone or encourage the use of cracked software or illegal cables. Use Vag Com 311.2 at your own risk. We are not responsible for any damage or legal issues that may arise from using this software or cable.