Apple Ipod

0 views

Skip to first unread message

Vincenza Speranza

unread,

Jan 25, 2024, 4:36:38 PM1/25/24

to senpomahlting

6.8 kΩ - Serial port mode. Pin 11-13 are TTL level. Requires MAX232 chip to convert to RS232 levels.
68kOhm - makes iPhone 3g send audio through line-out without any messages
500kOhm - related to serial communication / used to enable serial communications Used in Dension Ice Link Plus car interface
1MOhm - Belkin auto adaptor, iPod shuts down automatically when power disconnected Connecting pin 21 to ground with a 1MOhm resistor does stop the ipod when power (i.e. Firewire-12V) is cut. Looks to be that when this pin is grounded it closes a switch so that on loss of power the Ipod shuts off. Dock has the same Resistor.

apple ipod

Download Zip ––– https://t.co/fyBQ6B2E5G

If you disassemble the original apple-ipod-dock-connector-cable and look at the connector itself, on the back side, where it is soldered, you can see the number 1 and 30 (e.g. Pins 1 and 30). In this description the NUMBERING is INVERSED: Pin 1 is Pin 30 and Pin 29 is Pin 2. So, don't look at the numbers on the connector.