Roof Construction Manual

[Gigí Ruais]

Withmore than 1800 drawings and 220 photos, the Roof Construction Manual is a proven reference book for the construction of sloped or pitched roofs. It offers comprehensive basic knowledge and fundamental information on all common types of roofing and provides pratical design details for all common cover types.

The book is divided according to the type of roof elements and jointing techniques. Thirteen kinds of roofs and concrete, fibre-cement, bitumen, glass, metal, membranes and synthetic materials are documented. Also described in detail are essential topics such as ventilation, vapour barriers and airtightness, insulation and drainage; refurbishment and energy conservation are examined in detail.

Tabulated engineered and prescriptive design provisions in WFCM Chapters 2 and 3 respectively, are based on the following loads from ASCE/SEI 7-16 Minimum Design Loads and Associated Criteria for Buildings and Other Structures:

The WFCM includes design and construction provisions for connections, wall systems, floor systems, and roof systems. A range of structural elements are covered, including sawn lumber, structural glued laminated timber, wood structural sheathing, I-joists, and trusses.

This CRCA roofing manual provides information about maintaining a roof to obtain the highest level of performance throughout its expected service life. It can be used on its own or as part of the Standard Form of Warranty.

This CRCA roofing manual presents proven and acceptable general standards for roofing practices and procedures. It has been extensively revised to reflect the roofing industry today, with now twice the content of the previous edition. The current edition of the manual includes:

This CRCA roofing manual is a core national training and upgrading manual. It provides the theoretical and technical information required to perform the tasks set out in the national training standards for both apprentices and journey persons. It supplements existing roofing training material and current methods.

The manual is divided into four separate books. It is an ideal reference for use on the job site and to supplement other information that roofers require to do their jobs safely, effectively and efficiently.

Because professional implementation of such roofs is in practice not always as simple as it sounds, this publication gives planners the basic building rules and an overview of the kinds of flat roof usages, structures and standards. In addition to the most important norms, rules and standards, construction plans of the main connection points round out this publication.

This installation training manual addresses the installation of metal roofing material and related accessories. It includes information pertaining to both new construction, reroofing and retrofit projects.

The MCA installation training manual was developed to improve the installation of metal roofing within the construction industry. The goal is to eliminate avoidable problems and reduce the need for additional work due to callbacks.

The Gypsum Construction Handbook or any of the chapters may be downloaded and viewed in PDF format. Adobe Acrobat Reader is required to view PDF files. Download Adobe Reader for free to view, print and collaborate on PDF files.

Describes complete line of construction products, including Sheetrock brand gypsum panels and Imperial brand gypsum base for drywall and veneer plaster construction, sheathing and ceilings. Also, beads, trims, framing, insulation, fasteners, adhesives, joint compounds, coatings, tapes, plaster finishes and textures.

Detailed instructions for installing drywall and veneer bases in single and multiple layer configurations. Also covers predecorated panels, water resistant panels, sheathing, insulation, fixtures and specialty materials. Provides information on fastener requirements and special constructions such as curved surfaces, arches, soffits, etc.

Durock brand cement board products and installation procedures, including proper attachment, taping and finishing. Encompasses moisture and climatic considerations, proper framing, fasteners, and finishing options in baths, kitchens, floors and specialty uses.

Complete guide to proper joint treatment and surface preparation for drywall construction. Includes installation of corner beads, trim and control joints; hand and mechanical finishing with setting-type and drying-type compounds; addresses special environmental and lighting situations. Covers textures, resurfacing and redecorating.

In-depth instructions for selecting, preparing and installing veneer plaster systems appearance and abuse-resistance options. Encompasses one-coat and two-coat veneer plaster systems and specialty finishes.

Describes full line of conventional plasters, laths and accessories for successful completion of plaster systems. Helps evaluate specific situations and end-use requirements to match plaster products to needs. Includes gypsum and plaster laths, beads and trims, clips and screws, framing components and specialty plasters.

Complete information on selection and installation of acoustical ceiling systems, including design considerations. Also contains information on standards, building codes, sound control, lighting and light reflectance, fire safety, seismic considerations and HVAC.

Outlines methods for matching systems to specific performance criteria. Covers fire and sound criteria, wood and steel partitions and sound control systems. Specialty systems include area separation walls, cavity shaft walls, fireproofing, curtain wall/fire containment systems, thermal insulation, air water and vapor control.

The first edition of the manual focused on ensuring proper moisture management in buildings, with particular emphasis on our fluid-applied flashing approach to window and door installation, our preferred method for constructing ventilated rain screens, our approaches to new basement construction and basement retrofits, as well as other details. This edition includes those details, some of which have been refined, and adds sections about walls and roof assemblies, detailing key strategies for controlling heat, air, and moisture.

3a8082e126