Cap for air bed?

[beers.jo...@gmail.com]

Any suggestions for a replacement cap to hold air in an REI "Relax Queen Air Bed"? REI doesn't have any parts - the mattress is at least 7 years old. The plastic plumbing caps at Ace Hardware on Willy St. have the wrong thread pitch, even though a 3/4 inch diameter cap was roughly the same size as the threaded hole.

I searched the web (Ebay, etc.) without any luck.

A 1" twist-turn drain plug at Ace worked, but having a brass piece extending above the mattress seems less than ideal.

Here's a link to e photos, including the drain plug:

https://photos.app.goo.gl/ETx1xz6bNzb1Zn4U7

As always, thanks for any help.

[Chris Meyer]

Have you tried one of the generic ones online?

https://amzn.to/4nxaR39

Do you remember if it had an o-ring/face seal?  It's unclear from your picture if the front of the bung is flat/grooved/where the seal is being made.

Chris

--
You received this message because you are subscribed to the Google Groups "Sector67 Public" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sector67+u...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/sector67/2f0d7221-4cc6-4625-8d0d-312bfe3f4a5bn%40googlegroups.com.