I have a few of the old style
I won't be home for six weeks
Tom
To view this discussion on the web visit https://groups.google.com/d/msgid/sebhc/SN6PR01MB3855DC4BA17C8E0AEFBEABAFF75B9%40SN6PR01MB3855.prod.exchangelabs.com.
On Oct 3, 2022, at 9:52 PM, Terry Smedley <terry....@gmail.com> wrote:
I've submitted a RFQ to ProtoCase for the flat brackets. Pricing based on my preliminary design looks to be about the same as what Ken obtained in 2019. There is a clearance issue to be resolved with the space between the bracket bend and PEM fastener. I should have firm pricing for a quantity purchase in a few days.
To view this discussion on the web visit https://groups.google.com/d/msgid/sebhc/9eb313cf-2739-4cb1-8318-06893a3348c7n%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/sebhc/9CB49BD8-6765-489E-A8DB-A0065D2DC620%40gmail.com.
10 $25.37/ea
25 $11.35/ea
50 $8.12/ea
"Priority" turnaround (2-3 days ARO):
10 $35.86/ea
25 $15.03/ea
50 $11.03/ea
Clearly it makes no sense to order fewer than 25. The 25/50 prices are comparable to what Ken obtained several years ago. Those prices include shipping to a single US address. There's a $40 setup fee which is waived on subsequent reorders if there are no design changes. I've already paid that fee for the quantity one prototype so unless changes are needed, it will be waived for a group order.
I'll post photos and results of the prototype as soon as FedEx delivers it.
Terry
To view this discussion on the web visit https://groups.google.com/d/msgid/sebhc/0daec10f-d6bc-4940-8469-45dc576cb811n%40googlegroups.com.
I'd go 10 at that price as well
Steve
To view this discussion on the web visit https://groups.google.com/d/msgid/sebhc/CAGQDgBCyvcEsdu9ZnWB5m8MahK2uX4wRFd4NDNe1_iqM0-s4tQ%40mail.gmail.com.
Joe,
I still have some in stock of each one.
Thanks,
Norberto
To view this discussion on the web visit https://groups.google.com/d/msgid/sebhc/SN6PR01MB3855DC4BA17C8E0AEFBEABAFF75B9%40SN6PR01MB3855.prod.exchangelabs.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/sebhc/BN7PR01MB38440861B3BD29EB8261ED87F75C9%40BN7PR01MB3844.prod.exchangelabs.com.
Great work Terry. Thanks for making this happen. I suspect there are many who could use these. I like the new clinch nuts too!
I presume we don’t need the “flange” type (like the originals)? Seems like most of Norberto’s new boards are designed so you can attach the regulator directly to the front side of the bracket… and of course if you’re using the step up/down switching regulator there’s really no need to heat sink…
To view this discussion on the web visit https://groups.google.com/d/msgid/sebhc/b61a3d15-e089-4a5c-bfd6-6fbc3b94b11bn%40googlegroups.com.
This is a fantastic outcome. Thanks so much to Terry for finding a vendor who can fabricate these brackets, and for Todd for helping order and distribute them. As I recall from the discussions here there should be lots of demand for these as people build out the new boards.
Thanks guys!
To view this discussion on the web visit https://groups.google.com/d/msgid/sebhc/9ca2ff36-2a64-4c37-857d-0f448986be5fn%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/sebhc/9ca2ff36-2a64-4c37-857d-0f448986be5fn%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/sebhc/9ca2ff36-2a64-4c37-857d-0f448986be5fn%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/sebhc/d9702f4c-605a-4333-86f8-db995910452en%40googlegroups.com.
You received this message because you are subscribed to a topic in the Google Groups "SEBHC" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/sebhc/kJ8j2dPcESE/unsubscribe.
To unsubscribe from this group and all its topics, send an email to sebhc+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/sebhc/02490cd7-46a1-4d10-b23f-d07bb42be656n%40googlegroups.com.
On Dec 11, 2022, at 1:48 PM, Terry Smedley <terry....@gmail.com> wrote:
As soon as I receive a sample of Todd's current inventory, I will confirm the dimensions for the clearance issue you described. The brackets he now has were designed from scratch based on measurements from a Heath OEM bracket. There's a photograph in this thread somewhere that shows the two lined up next to each other. I will double check ASAP but I believe the redesign should be accurate.,
To view this discussion on the web visit https://groups.google.com/d/msgid/sebhc/b0735b2f-8228-45a6-b42b-b11a8d7a679cn%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/sebhc/0662d7d1-83aa-470e-b868-266336a73b47n%40googlegroups.com.
Yes, all the way from New Hampshire to Guam and then Hawaii and then back to the continental US in Washington!!!
Crazy!
I'm glad they finally arrived Terry
Todd
To view this discussion on the web visit https://groups.google.com/d/msgid/sebhc/0662d7d1-83aa-470e-b868-266336a73b47n%40googlegroups.com.