Looking for a Z67-IDE+

15 views
Skip to first unread message

Rob

unread,
Jun 16, 2022, 7:53:36 PM (8 days ago) Jun 16
to SEBHC
I have the original SASI board and the Z67-IDE board, but see that some things require the Z67-IDE+?  If so, does anyone have one they can sell me?

I've been away for a few years and just trying to get back up to speed...

Don't worry, I have a TON of questions.

Thanks!

Rob

norberto.collado koyado.com

unread,
Jun 16, 2022, 8:18:05 PM (8 days ago) Jun 16
to SEBHC
Rob,

I do not have any more Z67-IDE+ boards. Rather than ordering more boards, I'm focused on enabling the Z67-SDC board which will cost less than the Z67-IDE+ as it uses standard TTL parts. 

The Z67-SDC is still in debug as it has a timing issue (it crashes at random, so it is hard to understand what is causing the issue).  It is using same code as the Z67-IDE+ on different HW. Terry S. has been helping me to solved this issue. Small progress in the right direction has been made.  My setup has a SCSI logic analyzer, SPI logic analyzer, and a scope attached to hopefully find the issue. Also I have attached two laptops to capture proper timing.  

In the background, I'm also I'm updating the original Z67-IDE that was used inside the H8 chassis with a newer version. Same design but faster. It is going to be a full-size board. I will be ordering boards soon to check the layout. It will be using the same Z67-IDE+ code on different HW to make it easy to enable.

Thanks,
Norberto

From: se...@googlegroups.com <se...@googlegroups.com> on behalf of Rob <rw...@robhome.com>
Sent: Thursday, June 16, 2022 4:53 PM
To: SEBHC <se...@googlegroups.com>
Subject: [sebhc] Looking for a Z67-IDE+
 
--
You received this message because you are subscribed to the Google Groups "SEBHC" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sebhc+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/sebhc/39dc6057-262a-4b79-a794-5e407fcd61d7n%40googlegroups.com.

rw...@robhome.com

unread,
Jun 16, 2022, 8:25:40 PM (8 days ago) Jun 16
to sebhc Google Group
OK,

Thanks for the update. I have the new H8-H67-H37-H17 board that I need to finish building out… I’ll spend time with that for now and wait for the new board.

Thanks!

Rob

From: se...@googlegroups.com <se...@googlegroups.com> On Behalf Of norberto.collado koyado.com
Sent: Thursday, June 16, 2022 7:18 PM
To: sebhc Google Group <se...@googlegroups.com>
Subject: Re: [sebhc] Looking for a Z67-IDE+

Rob,

I do not have any more Z67-IDE+ boards. Rather than ordering more boards, I'm focused on enabling the Z67-SDC board which will cost less than the Z67-IDE+ as it uses standard TTL parts.

The Z67-SDC is still in debug as it has a timing issue (it crashes at random, so it is hard to understand what is causing the issue). It is using same code as the Z67-IDE+ on different HW. Terry S. has been helping me to solved this issue. Small progress in the right direction has been made. My setup has a SCSI logic analyzer, SPI logic analyzer, and a scope attached to hopefully find the issue. Also I have attached two laptops to capture proper timing.

In the background, I'm also I'm updating the original Z67-IDE that was used inside the H8 chassis with a newer version. Same design but faster. It is going to be a full-size board. I will be ordering boards soon to check the layout. It will be using the same Z67-IDE+ code on different HW to make it easy to enable.

Thanks,
Norberto
________________________________
From: se...@googlegroups.com<mailto:se...@googlegroups.com> <se...@googlegroups.com<mailto:se...@googlegroups.com>> on behalf of Rob <rw...@robhome.com<mailto:rw...@robhome.com>>
Sent: Thursday, June 16, 2022 4:53 PM
To: SEBHC <se...@googlegroups.com<mailto:se...@googlegroups.com>>
Subject: [sebhc] Looking for a Z67-IDE+

I have the original SASI board and the Z67-IDE board, but see that some things require the Z67-IDE+? If so, does anyone have one they can sell me?

I've been away for a few years and just trying to get back up to speed...

Don't worry, I have a TON of questions.

Thanks!

Rob
--
You received this message because you are subscribed to the Google Groups "SEBHC" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sebhc+un...@googlegroups.com<mailto:sebhc+un...@googlegroups.com>.
To view this discussion on the web visit https://groups.google.com/d/msgid/sebhc/39dc6057-262a-4b79-a794-5e407fcd61d7n%40googlegroups.com<https://groups.google.com/d/msgid/sebhc/39dc6057-262a-4b79-a794-5e407fcd61d7n%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to a topic in the Google Groups "SEBHC" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/sebhc/Oi_w7v4PwVY/unsubscribe.
To unsubscribe from this group and all its topics, send an email to sebhc+un...@googlegroups.com<mailto:sebhc+un...@googlegroups.com>.
To view this discussion on the web visit https://groups.google.com/d/msgid/sebhc/SN6PR01MB3855F2DB891FC3EF1F03CFC8F7AF9%40SN6PR01MB3855.prod.exchangelabs.com<https://groups.google.com/d/msgid/sebhc/SN6PR01MB3855F2DB891FC3EF1F03CFC8F7AF9%40SN6PR01MB3855.prod.exchangelabs.com?utm_medium=email&utm_source=footer>.
winmail.dat

Joseph Travis

unread,
Jun 16, 2022, 10:20:07 PM (8 days ago) Jun 16
to se...@googlegroups.com
Rob,

I have one if you're interested.  I'll email you directly with the info.

Regards,
Joe Travis n6ypc


To unsubscribe from this group and stop receiving emails from it, send an email to sebhc+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/sebhc/SA0PR01MB6284DBF192674D26A9E47CAAA1AF9%40SA0PR01MB6284.prod.exchangelabs.com.
Reply all
Reply to author
Forward
0 new messages