Extruder gear

[Land Ofthedave]

Is their anyone in the area willing, for a fee, to print off a gear for my extruder?  It is the large gear that turns the hobbed bolt on a Greggs hinged extruder on a prusa i3.  I can order one off of ebay but if i can get one printed locally from someone local i would rather do that.  

[Juan Posada]

If you have the STL I will gladly print one for you.

On Fri, Aug 8, 2014 at 5:32 PM, Land Ofthedave <thelando...@gmail.com> wrote:

Is their anyone in the area willing, for a fee, to print off a gear for my extruder?  It is the large gear that turns the hobbed bolt on a Greggs hinged extruder on a prusa i3.  I can order one off of ebay but if i can get one printed locally from someone local i would rather do that.  

--
You received this message because you are subscribed to the Google Groups "Seattle Makerbot/Mendel Users Group - SMUG(r)" group.
To unsubscribe from this group and stop receiving emails from it, send an email to seattlemakerb...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[geneb]

I'd be up for it, but I'm located in Graham. You might be able to find
someone closer.

g.

--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.
http://www.diy-cockpits.org/coll - Go Collimated or Go Home.
Some people collect things for a hobby. Geeks collect hobbies.

ScarletDME - The red hot Data Management Environment
A Multi-Value database for the masses, not the classes.
http://scarlet.deltasoft.com - Get it _today_!

[Land Ofthedave]

thanks to the both of you that replied. I wound up getting a gear. Now its calibration time. I am having a few problems. I will probably post back here once i work through everything i know.

[Ronald Aldrich]

The reprap IRC channel ( http://reprap.org/wiki/IRC ) is a great place to get help with a new printer.

- Ron

On Aug 19, 2014, at 8:16 PM, Land Ofthedave <thelando...@gmail.com> wrote:

thanks to the both of you that replied.  I wound up getting a gear.  Now its calibration time.  I am having a few problems.  I will probably post back here once i work through everything i know.