Re: Digest for seattle-home-electrification@googlegroups.com - 1 update in 1 topic

28 views
Skip to first unread message

David Winans

unread,
Sep 12, 2021, 3:03:20 PM9/12/21
to seattle-home-e...@googlegroups.com
Our Whirlpool model is large 7.4 cu ft and can handle large loads for our family of 4.  Fitted sheets sometimes trap smaller items, but not a big deal.  It looks like I posted the wrong link for the model I bought.  Here is the correct one.  https://www.albertlee.biz/product/whirlpool-74-cu-ft-white-front-load-electric-dryer-whd560chw-249823   I think it came out to about $800 or 850 after rebates.  A year later it is still working well except lint is starting to build up on the evaporator coil that is behind the lower lint filter and a protective (non-removable) screen. We have regularly cleaned the lower lint screen, but lint is still getting past.  We are likely facing an expensive service call to have the machine partially disassembled to clear the coil or it will start to reduce the efficiency.  Not too happy about this and have reached out to Whirlpool for help and to recommend that they change the protective screen to a removable one in future models.  Whirlpool said thanks for the input and that they will pass along to their engineers, but there is not much else they can do.

On Sat, Mar 6, 2021 at 8:40 PM <seattle-home-e...@googlegroups.com> wrote:
Rachel Koller <kolle...@gmail.com>: Mar 06 10:27AM -0800

Hi All,
We have a Beko heat pump dryer (link
<https://www.albertlee.biz/product/beko-24-white-front-load-heat-pump-dryer-hpd24412w-108336>)
purchased at Albert Lee's 'garage sale' a year and a half ago (we spent
$1600 on washer/dryer combo), and totally agree with David's assessment of
the quirks.
Add'l thought - It's a small dryer, which is fine for a family of 3 but
might be more challenging for a large family. We've found that sheets in
particular get balled up and then not evenly dried due to the size of the
drum.
To be honest, it's been great for our move to electrification (we had a gas
dryer previously), and energy savings, but compared to a standard electric
dryer it's not perfect! I'm fine with the tradeoffs, but I feel like for
many American families used to a jet engine blasting your clothes dry, it
could still be a hard sell.
-Rachel
 
On Tuesday, February 23, 2021 at 7:13:56 PM UTC-8 dwinansa...@gmail.com
wrote:
 
You received this digest because you're subscribed to updates for this group. You can change your settings on the group membership page.
To unsubscribe from this group and stop receiving emails from it send an email to seattle-home-electri...@googlegroups.com.

Steve Gelb

unread,
Sep 22, 2021, 11:43:06 AM9/22/21
to seattle-home-e...@googlegroups.com
I think for the split system water heater Sanden is the only manufacturer and you can contact Small Planet Supply, the distributor, for contractors.  https://www.smallplanetsupply.com/

EnergyWorks did our install of a ducted heat pump system.  I can also recommend Resicon.  

Steve

On Tue, Sep 21, 2021 at 9:40 PM <seattle-home-e...@googlegroups.com> wrote:
Laura Feinstein <feins...@gmail.com>: Sep 20 10:07PM -0700

Hi all,
We’re hoping to start our electrification journey soon by replacing our
furnace and water heater with heat pump solutions. We *think* the right
solution for our home is going to be a split system for the water heater
and a ducted heat pump for space heat. I’m hoping folks on this list can
provide some recommendations for contractors who sell and install these
types of systems.
 
Laura
 
PS-Our home is in Seattle.
You received this digest because you're subscribed to updates for this group. You can change your settings on the group membership page.
To unsubscribe from this group and stop receiving emails from it send an email to seattle-home-electri...@googlegroups.com.


--
Steve Gelb
Northwest Regional Manager

Emerald Cities Seattle | America Empowered
206 713-0952
E sg...@emeraldcities.org 
W www.emeraldcities.org
Facebook EmeraldCitiesCollaborative | Twitter @EmeraldCities

Allan Montpellier

unread,
Sep 22, 2021, 2:28:02 PM9/22/21
to Steve Gelb, seattle-home-e...@googlegroups.com

I just had a Sanden unit installed by Cardinal.  Works great!

 


Allan Montpellier, PE, LEED AP

PRINCIPAL
he | him

PAE

d: 206.596.8615 | m: 617.877.9516
Get connected

From: seattle-home-e...@googlegroups.com <seattle-home-e...@googlegroups.com> On Behalf Of Steve Gelb
Sent: Wednesday, September 22, 2021 8:43 AM
To: seattle-home-e...@googlegroups.com
Subject: Re: Digest for seattle-home-e...@googlegroups.com - 1 update in 1 topic

 

You don't often get email from sg...@emeraldcities.org. Learn why this is important

I think for the split system water heater Sanden is the only manufacturer and you can contact Small Planet Supply, the distributor, for contractors.  https://www.smallplanetsupply.com/

 

EnergyWorks did our install of a ducted heat pump system.  I can also recommend Resicon.  

 

Steve

 

On Tue, Sep 21, 2021 at 9:40 PM <seattle-home-e...@googlegroups.com> wrote:

·     Contractor recommendations - 1 Update

Laura Feinstein <feins...@gmail.com>: Sep 20 10:07PM -0700

Hi all,
We’re hoping to start our electrification journey soon by replacing our
furnace and water heater with heat pump solutions. We *think* the right
solution for our home is going to be a split system for the water heater
and a ducted heat pump for space heat. I’m hoping folks on this list can
provide some recommendations for contractors who sell and install these
types of systems.
 
Laura
 
PS-Our home is in Seattle.

You received this digest because you're subscribed to updates for this group. You can change your settings on the group membership page.
To unsubscribe from this group and stop receiving emails from it send an email to seattle-home-electri...@googlegroups.com.


 

--

Steve Gelb
Northwest Regional Manager

Emerald Cities Seattle | America Empowered
206 713-0952
E sg...@emeraldcities.org 
W www.emeraldcities.org

Facebook EmeraldCitiesCollaborative | Twitter @EmeraldCities

Image removed by sender.

--
You received this message because you are subscribed to the Google Groups "Western Washington Home Electrification" group.
To unsubscribe from this group and stop receiving emails from it, send an email to seattle-home-electri...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/seattle-home-electrification/CAMhs5iSjJpqeDi15wRtGs5ivMuZZGasobirEzxPJJsFcq0crBw%40mail.gmail.com.

Thad Curtz

unread,
Sep 22, 2021, 6:47:14 PM9/22/21
to seattle-home-e...@googlegroups.com
Any suggestions about a heat pump hot water installer in Olympia?

More generally, I would like to find somebody to consult with me about the whole space heating setup in my 1897 Victorian, which is insulated floor, most walls and attic, air sealed, has new windows downstairs and home made double layer plastic interior storms in the upstairs dormer bedrooms, still has so-so blower door test results. I’ve got a high efficiency fairly new ducted gas furnace in the basement, but there are no ducts to the upstairs - just a grate in the floor to each of the dormer bedrooms that were added on to the house later. (They have electric wall heaters now.) The furnace doesn’t keep the back of the house quite warm enough either.

I had a guy from the local HVAC contractor that’s started advertising itself as a heat pump specialist come out, and hoped to get advice about replacing the furnace with a ducted heat pump, versus putting in a minisplit that would be big enough to handle the whole house eventually with just one air handler in the back for now, versus one mini-split for downstairs and one for upstairs. I wanted to know if I’d lose a lot with these air handlers that look like picture frames versus a standard one, and whether a ceiling air handler over the landing at the top of the stairs would work to heat the three little bedrooms up there through their open doorways, etc… The guy just said “Sure, we could do that” to every option I wanted to consider, which wasn’t much help. I’d like to find something like an energy concierge who really knew what they were doing and could look at the whole situation and give me a more professional analysis.

Best wishes,
Thad Curtz

Reply all
Reply to author
Forward
0 new messages