sdrtrunk

Is there a way to prevent specific radio IDs from streaming? sdrtrunk v0.6.1 Scenario/Configuration:

Still no luck with the latest dev beta of Tahoe. I did discover Tahoe and Sequoia hav driver support

Strange. Thank you for the information. On Sunday, September 28, 2025 at 4:48:06 AM UTC+3 charley....

Interesting. Thank you for your responses. I guess this kind of setup can accommodate a few dongles

The two times I've seen java crash like this on mine (sorry, didn't save the exact error),

I'm using the nightly version to decode the DMR T3. I'm experiencing errors with the group

Thanks for the information. I actually already have that turned on for all channels, but the 250.3 Hz

+1 for work on the decoders - the audio quality is fair to marginal for me atm for all but the

I do turn off the MSP sometimes when it is busy. On Friday, August 22, 2025 at 7:09:49 AM UTC-4

I have a playlist with 12 local single channel P25 services. I noticed that 2 of them seem not to be

What's the difficulty? Basic installation is pretty easy. Install and run or building it yourself

FWIW, your ppm looks off. Post a pic of the dongle selected in the tuners tab. On Sunday, August 10,

True.. but there is no harm in testing full gain. Setting to 495 is actually needed in some

https://github.com/DSheirer/sdrtrunk/pull/1091 On Saturday, July 26, 2025 at 1:54:36 PM UTC-4 Austin

Just fooling around with logging and stuff. I was specifically curious if location data was embedded

All of my talkgroups are imported from RRDB and retain original naming. I have been using this

I believe the next iteration 0.7.0 will allow more configuration when importing from RR - the

Set the channel up using the repeater input frequency and then you'll have to be close enough to

After reading a few different posts on this group I decided to manually adjust the PPM on the

I have made some headway. Not sure what change i made had the most effect I had the tuners set with a

I did try removing playlists and letting the program create a default, Recreated playlist manually

* resolved * David P suggested I try it without the USB hub, which I didn't do originally because

The second tuner wasn't working, i have replaced it and everything appears to be working On

Good afternoon, everyone. My county has an analog VHF channel that they use for broadcasting law

Update. I used the refresh button and they have all appeared. Thanks for your help Dave. On Thursday,

Hello, I follow a DMR Tier III Motorola Capacity Max Trunking system and have seen the following

TightVNC is now RemoteRipple (viewer). PC, Mac, Android, Iphone, Ipad Dean On Tuesday, May 27, 2025

@Pmf, This is what a good signal looks like. Notice the signal peaking way above the noise floor.

Instead of recording the baseband / voice channel IQ to a file, I wish it could be fed to an RTL_TCP

In addition to the gain being too high, the CPU usage indicator looks like its maxed out. What are