Close , but no cigar with SDC and AetherSDR

[Andrew O'Brien]

I spent a couple of hours dancing with an A.I engine trying to configure SDC with my Flex 8400 and Aether SDR .  As you probably guessed , A.I. took me down some wrong paths ,

Anyway, I have the SKMR SVR working but I do not have rig control , no PTT .   I would greatly appreciate someone taking a look at my screenshots and pointing me in the right direction.

Andy K3UK

[UT4LW Yuri Pavlov]

Andy, the SDC connects to the transceiver, not to the interface software (SmartSDR, AetherSDR, etc.). Right now, it doesn't matter which program controls the transceiver.

понедельник, 20 июля 2026 г. в 04:30:14 UTC+3, andre...@gmail.com:

[Andrew O'Brien]

So the solution is ? 

Andy

--
You received this message because you are subscribed to the Google Groups "SDC Software Defined Connectors" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sdc-ut4lw+...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/sdc-ut4lw/9ef1fb68-2017-401b-b140-ddfd3edb79a2n%40googlegroups.com.

[UT4LW Yuri Pavlov]

So the solution is ? 

1. Do not follow the AI's advice.
2. Connect the SDC to the transceiver just as you have done many times before.

понедельник, 20 июля 2026 г. в 14:54:24 UTC+3, andre...@gmail.com:

[Andrew O'Brien]

Thanks . I will go back to my Windows computers 

Andy 

Andy

To view this discussion visit https://groups.google.com/d/msgid/sdc-ut4lw/68500261-a6ca-4c63-a4b1-cf8461eb231an%40googlegroups.com.

[Andrew O'Brien]

Yuri et al,  I have it working now  on Both Windows and Mac OS 

Andy 

--

Andy