17.2811: SpotList and ESM in S&P

55 views
Skip to first unread message

aleksand...@gmail.com

unread,
May 12, 2024, 12:04:54 PMMay 12
to SDC Software Defined Connectors


Hi,


S&P
I have found some instability in ESM using the SpotList.

There are two states into which a click on the SpotList call sign
can put the Call cell in the New QSO window

1.
     The cursor blinks in. Hitting <Enter> starts the macro - always OK.

2.
    No cursor in the cell. 
    To make the <Enter> work, one needs to put the cursor into the cell 
    beside the call sign and then use <Enter>. However, miraculously there were times 
    when the ESM macro started without the cursor.


Can You, please, 
have a look into it ?

Best regards,
Alec
    

UT4LW Yuri Pavlov

unread,
May 12, 2024, 1:16:05 PMMay 12
to SDC Software Defined Connectors
Alec, I don't see the problem.
Some events that do not require focus in the call sign field to start an ESM:
- If you move through the list in the SpotList window and press Enter, the focus will be transferred to the "New QSO" window and the ESM procedure will begin.
- If the cursor is in the "New QSO" window in some other field, such as a button, or in the frequency, CW rate field and you press Enter, the ESM will also start. In this case it depends on the field where the focus was (Call, NR).


воскресенье, 12 мая 2024 г. в 19:04:54 UTC+3, aleksand...@gmail.com:

aleksand...@gmail.com

unread,
May 13, 2024, 6:01:20 AMMay 13
to SDC Software Defined Connectors


Yuri,

it looks You somehow have misunderstood me.

OK. 
You operate Your way, maybe a better one, 
I operate my way which suits me enough, and that is:

I left click on the call in the SpotList, the focus is supposed to go 
to the Call field in the New QSO window which, then, makes me ready 
for further ESM.

..If the cursor is in the "New QSO" window in some other field:
You suggest that the above described "left click" may also bring focus 
to any other field in the New QSO than the Call field?

If so, tell me where the focus went for the case No, 2.
Anyway, actually, I am not interested in the answer as it is irrelevant.

Instead, make it so, please, that there is no case No.2,
and the "left click" action in the SpotList ALWAYS puts focus
to the Call field in the New QSO window. to make one ready for ESM
without any additional focussing moves.

PLEASE....

Just to bring back case No.2
2..
    No cursor in the cell. 
    To make the <Enter> work, one needs to put the cursor into the cell 
    beside the call sign and then use <Enter>. However, miraculously there were times 
    when the ESM macro started without the cursor.


Best regards,
Alec



------ Wiadomość oryginalna ------
Nadawca "UT4LW Yuri Pavlov" <ur4ix....@gmail.com>
Do "SDC Software Defined Connectors" <sdc-...@googlegroups.com>
Data 12.05.2024 19:16:05
Temat Re: 17.2811: SpotList and ESM in S&P

--
You received this message because you are subscribed to the Google Groups "SDC Software Defined Connectors" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sdc-ut4lw+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/sdc-ut4lw/120ca092-8d68-40d4-bce7-dccc451f05f3n%40googlegroups.com.

UT4LW Yuri Pavlov

unread,
May 13, 2024, 8:43:10 AMMay 13
to SDC Software Defined Connectors
Alec, check this box and the focus will be transferred to the New QSO window field Call whenever you select a spot. Even if you click on a spot on the transceiver panorama.

focus.png
понедельник, 13 мая 2024 г. в 13:01:20 UTC+3, aleksand...@gmail.com:
Reply all
Reply to author
Forward
0 new messages