TCI: No TX

68 views
Skip to first unread message

aleksand...@gmail.com

unread,
Apr 27, 2024, 2:47:18 PMApr 27
to SDC Software Defined Connectors


Hi,

we have upgraded to v. 17.1734,
and a friend of mine who uses TCI encountered a problem.

His radio turns to TX but no TX signal comes out.
RX works great, everything look normal.

As I can only check the things remotely via the telephone,
I need some guidance on where to look for a possible mischief.

BTW
with the previous SDC version he was TXing OK.


Will You help,
please?

Best regards,
Alec SP2EWQ

UT4LW Yuri Pavlov

unread,
Apr 28, 2024, 2:23:32 AMApr 28
to SDC Software Defined Connectors
Alec, I will be able to understand this problem in two weeks when I have access to such a transceiver.

суббота, 27 апреля 2024 г. в 21:47:18 UTC+3, aleksand...@gmail.com:

aleksand...@gmail.com

unread,
Apr 28, 2024, 7:23:06 AMApr 28
to SDC Software Defined Connectors


Yuri,

thanks a lot - I really appreciate Your response.

We have found out that, in his case, RTTY is transmitted with DIGL only.
Unfortunately, somehow, the transceiver had been set to DIGU,
and that was the root cause of the problem.

--

However,
there is another thing yet: the. Spot list is not being filled for him.
Skimmers read the text and call signs, but no transfer to the Spot list
windows takes place.

Any suggestion, Yuri,
please?

Best regards,
Alec






------ Wiadomość oryginalna ------
Nadawca "UT4LW Yuri Pavlov" <ur4ix....@gmail.com>
Do "SDC Software Defined Connectors" <sdc-...@googlegroups.com>
Data 28.04.2024 08:23:32
Temat Re: TCI: No TX

--
You received this message because you are subscribed to the Google Groups "SDC Software Defined Connectors" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sdc-ut4lw+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/sdc-ut4lw/1641d1e1-cc10-46e3-a28d-a5770c1728fdn%40googlegroups.com.

UT4LW Yuri Pavlov

unread,
Apr 28, 2024, 7:37:25 AMApr 28
to SDC Software Defined Connectors
However,
there is another thing yet: the. Spot list is not being filled for him.
Skimmers read the text and call signs, but no transfer to the Spot list
windows takes place.

There could be a large number of reasons for this. Both in the skimmer setting and in the SpotList setting. Show us screenshots of Telnet Server, SKM Server, SpotList settings tabs.

воскресенье, 28 апреля 2024 г. в 14:23:06 UTC+3, aleksand...@gmail.com:

aleksand...@gmail.com

unread,
May 12, 2024, 4:56:48 AMMay 12
to SDC Software Defined Connectors


Yuri,

SmartSDR and SDC Contest

re: 

I do not know how it works, but as per Your recommendation
with switching those filters to OFF (which is depicted above),
it looks the filters are not OFF. 

With these settings visualized above the filters are ON:
really confusing...

--

Another thing I cannot put a logic behind 
is switching the DAX Channel OFF while receiving and putting it again ON 
while transmitting - another absolutely confusing operation to me. 
Why is that so, please?


Best regards,
Alec



------ Wiadomość oryginalna ------
Do "Юрий Павлов" <ur4ix....@gmail.com>
Data 12.05.2024 07:53:05
Temat Re[2]: TCI: No TX



------ Wiadomość oryginalna ------
Nadawca "Юрий Павлов" <ur4ix....@gmail.com>
Data 11.05.2024 21:48:07
Temat Re: TCI: No TX

Install 17.2809. I've simplified the way the filters work.

https://www.lw-sdc.com/?page_id=79

11.05.2024 22:06, aleksand...@gmail.com wrote:

If shown as above, they are turned off or on?
I cannot find it anywhere,
please...

...



------ Wiadomość oryginalna ------
Nadawca "Юрий Павлов" <ur4ix....@gmail.com>
Data 11.05.2024 20:38:58
Temat Re: TCI: No TX

We need to turn off those filters


Rich

unread,
May 12, 2024, 6:55:39 AMMay 12
to SDC Software Defined Connectors
Alek,

I find the buttons confusing as well.

In my case, I have DUPs as yellow. You can see the condition of button with Show DUPs activated.

The MULT (red) and VOID (black) are NOT active.

I would prefer it if Yuri used buttons like he does in Acti Spot with a green illumination next to them.

73,

Rich
kd0zv

2024-05-12_05-50-35.jpg

UT4LW Yuri Pavlov

unread,
May 12, 2024, 8:04:17 AMMay 12
to SDC Software Defined Connectors
The coloring of the button's circumference/circle is set from the general settings in the SDC-Contest->Main tab. Various windows and elements use this color setting:

color.png

For the night scheme, these colors are not appropriate, please change them to your liking.

In test version 17.2811, I changed the filling of the "LEDs" in these buttons. In addition, a filtering bug in SpotList windows that occurred when Dupe and Void was selected at the same time has been fixed.


воскресенье, 12 мая 2024 г. в 13:55:39 UTC+3, r.mc...@iowawebhosting.com:
Reply all
Reply to author
Forward
0 new messages