Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Reactor coil

4 views
Skip to first unread message

Christopher Strevens

unread,
Feb 26, 2013, 11:14:09 AM2/26/13
to

Here I use more turns and a smaller capacitor to get 50 Hz resonator. The inductance is calculated by a published formula for multilayer coil in Wikipedia and the capacitor is a 0.1E-6uF commercial capacitor. I cannot wind the 29000T coil as I have already wound the 13000T coil and I have run out of wire and I would have to get a new former made.

 

The result is the same power out at 500 v (RMS) across the winding but with a lower winding current and therefore much lower copper loss for the power.

 

Here is the calculation print out.

 

diameter of wire in mm 0.170

diameter of former in mm 60

length of former in mm 60

number of turns 30000

Turns per layer 352.941176

Number of Layers 85.0

Diameter of coil 0.0889

Length of Wire 7133.00465 Meters

resistance of winding 5278.56342

total inductance by complex formula 106.305014

1 for exit 2 for new turns 1

capacitance of external capacitor 0.1E-6

dynamic impedance 201390.048

Resonant frequency is 48.8050695

1 for exit 2 for another turns value 2

number of turns 28000

Turns per layer 352.941176

Number of Layers 79.3333333

Diameter of coil 0.86973333e-1

Length of Wire 6544.85897 Meters

resistance of winding 4843.32408

total inductance by complex formula 92.6377114

1 for exit 2 for new turns 1

capacitance of external capacitor 0.1E-6

dynamic impedance 191268.868

Resonant frequency is 52.2814835

1 for exit 2 for another turns value 2

number of turns 29000

Turns per layer 352.941176

Number of Layers 82.1666667

Diameter of coil 0.87936667e-1

Length of Wire 6837.23504 Meters

resistance of winding 5059.68811

total inductance by complex formula 99.3500352

1 for exit 2 for new turns 1

capacitance of external capacitor 0.1E-6

dynamic impedance 196356.046

Resonant frequency is 50.4844696

1 for exit 2 for another turns value 1

Q 6.2296015

Winding Mass 1.38766321 Kg

Rms Potential 10000

Half Wavelength 0.03

Velocity 3.02906818

Peak Potential 14000.0

Peak Current 0.38272773

Peak Ampere Turns 11099.1042

Plasma Current 11099.1042

Plasma Current Density 1.10991042e9 Amp per meter^2, near centre

Additional Pressure of Plasma 2.86728115e10 Pa

Power lost through resistance 529.389802 Watt

Power Generated 4.6498748e14 Watt

1 exit 2 loop 2

Rms Potential 500

Half Wavelength 0.03

Velocity 3.02906818

Peak Potential 700.0

Peak Current 0.19136387e-1

Peak Ampere Turns 554.955209

Plasma Current 554.955209

Plasma Current Density 55495520.9 Amp per meter^2, near centre

Additional Pressure of Plasma 71682028.9 Pa

Power lost through resistance 1.3234745 Watt

Power Generated 2.90617175e9 Watt

1 exit 2 loop 1

1 exit 2 again 1

 

The power is for deuterium but for natural hydrogen the power is multiplied by the square of the fractional content of deuterium in the gas.

 

The frequency is adjusted with a high voltage parallel capacitor.

 

Dr Chris

http://www.cs003o327.webspace.virginmedia.com/

 

0 new messages