i have a propane torch can i use it to cut?...
ChaoticTerror
it has a nozzel and the propane tank screws onto it
will this cut through metal?...
Mike Graham
>I have a propane hand held torch can i use this to cut metal?...
No.
--
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Mike Graham | Steel-fitter and CWB-certified weldor
metalmangler at headwaters dot com | Raiser of horses
<webpage temporarily unavailable> | Tester of limits (esp. patience)
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
whyaskwhyaskwhy
"Mike Graham" <metalm...@headwaters.com> wrote in message
news:slrn9gf63e.qq...@localhost.localdomain...
> ChaoticTerror <chaotic...@hotmail.com> wrote:
>
> >I have a propane hand held torch can i use this to cut metal?...
>
> No.
what about tinfoil?
Roger Duncan
You can melt a hole in lead sheet. Weld lead sheet.
ChaoticTerror
it isnt a small pos one its not osme thing u can put in ur pocket its big
even witha focused flam i cant melt mnetal at all?.... or burn through it
"ChaoticTerror" <chaotic...@hotmail.com> wrote in message
news:%MHN6.6046$uk2.2...@news1.rdc2.pa.home.com...
Lane Gustafson
Mike Davis
whyaskwhyaskwhy <blac...@404infomagic.com> wrote in message news:tgfuacm...@corp.supernews.com...
>
> what about tinfoil?
>
>
Roger Duncan
<chaotic...@hotmail.com> wrote:
>u mean the torch does nothing but melt solder?....
>
>it isnt a small pos one its not osme thing u can put in ur pocket its big
>even witha focused flam i cant melt mnetal at all?.... or burn through it
>
U said melt solder, I didnt. I said it could melt a hole in lead
sheet., but it might solder coper pipe. Realy dont now what it could
do as I dont have any brand names, size of burner or size of tank.
Small propane tank and benzomatic torch or such can solder copper pipe
and melt some lead. With an Oxygen/Propane torch u can silver solder
and with cutting torch u can cut steel ceeper than using Oxgen
Acetalyne cutng torch. With the right popane burner u cn mk frg ad
melt mnetal fr cstng tgs aut br cns. With littl efert u culd blw u
slf up.
whyaskwhyaskwhy
"ChaoticTerror" wrote
> I have a propane hand held torch can i use this to cut metal?...
>
> it has a nozzel and the propane tank screws onto it
>
> will this cut through metal?...
yes. what you do is get some really thick plate and a couple bottles of
propane. put the plate in a vice and heat it up. this will take awhile but
be patient. once you get it up to red heat, take a hacksaw and cut right
through it.
bogmaster
<blac...@404infomagic.com> wrote:
>yes. what you do is get some really thick plate and a couple bottles of
>propane. put the plate in a vice and heat it up. this will take awhile but
>be patient. once you get it up to red heat, take a hacksaw and cut right
>through it.
I recommend m-42 cobalt HSS hacksaw blades due to their performance at
such elevated temperatures.
Howard Bailey
ChaoticTerror
no help really at all
anyways i use the torch but it was quite windy so it kept going out and
everythign was also wet but i got the metal to start smokena nd glow red
but the head ont weh torch was too small so it could get enough oxygen for
the amount of gas coming out at the speed it was
but no thankz to any of u fuckers
"bogmaster" <bog...@infomagic.com> wrote in message
news:a5uhgtc1n77tkf58p...@4ax.com...
Mike Graham
>but no thankz to any of u fuckers
Can you *feel* the love? 8-)
whyaskwhyaskwhy
"ChaoticTerror" wrote
> nm i realized all of u r little fuckers
>
> no help really at all
>
> anyways i use the torch but it was quite windy so it kept going out and
> everythign was also wet but i got the metal to start smokena nd glow red
> but the head ont weh torch was too small so it could get enough oxygen for
> the amount of gas coming out at the speed it was
>
> but no thankz to any of u fuckers
sounds like you stopped JUST SHORT of success, my friend. Try it again, only
get it way hotter this time. I understand your anger and frustration at
being a failure, but keep your chin up and your pedal to the metal and sure
as shooting you'll be right as rain before
Francois du Toit
speed rust if you will.
Therefore when trying to cut metals that form a tough oxide layer such as
aluminium and stainless steel you will only melt the metal but the oxide
will prevent the cutting action from taking place.
You need a plasma cutter or possible you can try iron powder in conjunction
with your oxy fuel system
Regards
Wayne
"ChaoticTerror" <chaotic...@hotmail.com> wrote in message
news:RIfO6.8856$uk2.3...@news1.rdc2.pa.home.com...
