Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
what fuse for a GE snapper 1000 probe?
17 views
Skip to first unread message
Tim R
May 11, 2018, 3:51:58 PM5/11/18
to
I found a GE clamp on amp probe at a yard sale.
It has a set of voltage probes with alligator clips, and a set of resistance probes with sharp points. Both plug into connector on the bottom.
I unscrewed the voltage probe and to my surprise there was an Eveready AA that had not leaked, though it looked this thing had been in the shed 50 years.
But it also had a fuse that was obviously blown badly. There are no markings, what would be normal for that?
It has a set of voltage probes with alligator clips, and a set of resistance probes with sharp points. Both plug into connector on the bottom.
I unscrewed the voltage probe and to my surprise there was an Eveready AA that had not leaked, though it looked this thing had been in the shed 50 years.
But it also had a fuse that was obviously blown badly. There are no markings, what would be normal for that?
0 new messages