Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
AIWA Turntable Stylus removal
677 views
Skip to first unread message
olds...@tubes.com
May 13, 2017, 12:20:02 AM5/13/17
to
I have an AIWA turntable, model PX-E850U.
It needs a stylus. On the label, it says "Replacement Stylus AN-11".
I'm sure I can locate a replacement stylus, but how the heck does it
come off? This has me very puzzled.
The good turntables I had over the years always had a removable head,
and the cartridge was held in place with tiny screws.
I see no way to remove this head, and there are no screws for the
cartridge. I know some of the stylus had a plastic piece that slid into
the cartridge. This looks like it might work that way, but it did not
pull off using light pressure. I know better than to force things, until
I know exactly how to remove it.
To make matters worse, I cant lift the tone arm more than an inch or so,
so I cant really get a good look under it.
Anyone know how to remove this stylus?
Thanks
It needs a stylus. On the label, it says "Replacement Stylus AN-11".
I'm sure I can locate a replacement stylus, but how the heck does it
come off? This has me very puzzled.
The good turntables I had over the years always had a removable head,
and the cartridge was held in place with tiny screws.
I see no way to remove this head, and there are no screws for the
cartridge. I know some of the stylus had a plastic piece that slid into
the cartridge. This looks like it might work that way, but it did not
pull off using light pressure. I know better than to force things, until
I know exactly how to remove it.
To make matters worse, I cant lift the tone arm more than an inch or so,
so I cant really get a good look under it.
Anyone know how to remove this stylus?
Thanks
Trevor Wilson
May 13, 2017, 1:08:18 AM5/13/17
to
You will probably find a you-tube instructions somewhere, but the stylus
does not pull out like most. It kinda pivots at the rear and 'clicks'
into place at the front. You just need to pull down on the stylus and it
will come out easily.
--
Trevor Wilson
www.rageaudio.com.au
Phil Allison
May 13, 2017, 1:32:14 AM5/13/17
to
Trevor Wilson wrote:
---------------------
>
>
> **Easy-peasy. The cartridge fitted is a standard Audio Technica type.
>
** Variable reluctance rather than MM ?
My first magnetic PU was an AT66, "induced magnet" type.
Bought it at Mike Sheridan's old store in Redfern in 1972.
http://www.thestyluslady.co.uk/ekmps/shops/thestyluslady/images/cartridge-and-stylus-audio-technica-at-66-at66-1545-p.jpg
.... Phil
---------------------
>
>
> **Easy-peasy. The cartridge fitted is a standard Audio Technica type.
>
My first magnetic PU was an AT66, "induced magnet" type.
Bought it at Mike Sheridan's old store in Redfern in 1972.
http://www.thestyluslady.co.uk/ekmps/shops/thestyluslady/images/cartridge-and-stylus-audio-technica-at-66-at66-1545-p.jpg
.... Phil
Trevor Wilson
May 13, 2017, 2:46:24 AM5/13/17
to
seen a few induced magnet types from a variety of manufacturers over the
years. I think Nagaoka still make a few. Dunno if AT still do them. I
doubt it.
http://www.nagaoka.eu/index.php?item=nagaoka-cartridges&action=page&group_id=10&lang=en
--
Trevor Wilson
www.rageaudio.com.au
philo
May 13, 2017, 8:29:18 PM5/13/17
to
storage I just put it back in service yesterday.
0 new messages