Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Planar EL DC-DC converter

1 view
Skip to first unread message

Garrett Mace

unread,
Sep 12, 2003, 12:59:35 AM9/12/03
to
I'm looking for a DC-DC converter as used in older Planar electroluminescent
displays. The particular one I need is a PS512-6. They were typically
mounted to the back of the display, or sometimes located a short distance
away with a 26-conductor cable.

If I could get a pinout of the power connector, that would be almost as
good.

Thanks...


Jeff Liebermann

unread,
Sep 12, 2003, 1:12:18 AM9/12/03
to
On Fri, 12 Sep 2003 04:59:35 GMT, "Garrett Mace" <g.r...@macetech.com>
wrote:

http://www.planar.com/support/el_support.asp
http://www.planar.com/support/documentation_archive_el.asp
http://www.ergpower.com/pub/el.asp

--
# Jeff Liebermann 150 Felker St #D Santa Cruz CA 95060
# 831.336.2558 voice http://www.LearnByDestroying.com
# je...@comix.santa-cruz.ca.us
# 831.421.6491 digital_pager je...@cruzio.com AE6KS

Garrett Mace

unread,
Sep 12, 2003, 1:26:43 AM9/12/03
to
> http://www.planar.com/support/el_support.asp
> http://www.planar.com/support/documentation_archive_el.asp
> http://www.ergpower.com/pub/el.asp


Very nice, but I had the forethought to Google up what I could find, before
posting. None of Planar's documents include the pinout of that power supply,
and it's more than just a source of high voltage; AFAIK there is some
communication between the the display and DC-DC converter.

What I need is an actual power module as produced by Planar years back. The
one I have burned itself up a little before the fuse tripped.


0 new messages