Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Lexmark 4039 error (923) fuser error
0 views
Skip to first unread message
Stan Zeidenberg
May 14, 2001, 6:11:01 PM5/14/01
to
I had a label stock jam and after removing the lable found that the printer was
not functioning. The self-test reported "923 Service Fuser error"
not functioning. The self-test reported "923 Service Fuser error"
Advice appreciated.
Stan
RM
May 14, 2001, 10:19:35 PM5/14/01
to
usually a 'fuser error' means that the fuser heater-lamp has burned
out, or a wire has broken. typically there's a thermal fuse on top of
the fuser which sometimes can go.
out, or a wire has broken. typically there's a thermal fuse on top of
the fuser which sometimes can go.
if you turn on the printer and wait for it to warm up and the fuser is
ice-cold, then you know the fuser isn't working
On Mon, 14 May 2001 22:11:01 GMT, st...@idirect.com (Stan Zeidenberg)
wrote:
0 new messages