Does Sony PVM-1354Q have a hidden service menu?

[GammaBurst]

I'd like to tweak the height and vertical linearity of my PVM-1354Q
monitor. I see very few trimpots inside. Does it have a hidden service
menu? How do I get into it? Thanks.

[GammaBurst]

On Mon, 20 May 2002 07:36:59 GMT, "Pete" <blahbl...@clear.net.nz>
wrote:

>"GammaBurst" <bu...@off.spambots> wrote in message
>news:5tvdeu8rgvgu5nbrg...@4ax.com...

>> I'd like to tweak the height and vertical linearity of my PVM-1354Q
>> monitor. I see very few trimpots inside. Does it have a hidden service
>> menu? How do I get into it? Thanks.
>

>I've done many hours on PVM-14 & 20 54s which are PAL units. I think the 13
>is an NTSC but i've never seen one! Try simultaneously pressing Deguass and
>Enter. This should put you into the service menu. Take care because you can
>reach the factory master setting & blow away everything which then needs a
>long session to bring it back if ever.

Wow thanks, that works! Have to be in the regular menu, then press
Degauss and Enter simultaneously. Menu/Enter scrolls through the
settings. +/- changes the setting. Degauss (twice) saves it. BlueOnly
(twice) rereads it. I haven't found an exit, except the power switch.

Most of the settings are self-explanatory. I assume the service manual
describes them all. I wonder if there's a manual on-line somewhere.

The PVM-1354Q is very similar to the PVM-14M2U. NTSC/PAL/SECAM, with a
nice 13-inch (visible) HR tube.