Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Cleaning old DIN connector sockets
0 views
Skip to first unread message
N_Cook
Jul 5, 2009, 6:36:04 AM7/5/09
to
A whole rank of 8 of them on the rear of a first year of production, 1983,
Audiolab 8000A. I would normally just push needles each side of the split
pins but as this is presumably potentially quite a valuable amp, even if
blown up at the moment, any tips for more considered treatment. ? No broken
pins just 1/4 century of corrosion and springy tiredness.
Audiolab 8000A. I would normally just push needles each side of the split
pins but as this is presumably potentially quite a valuable amp, even if
blown up at the moment, any tips for more considered treatment. ? No broken
pins just 1/4 century of corrosion and springy tiredness.
--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/
N_Cook
Jul 5, 2009, 10:25:12 AM7/5/09
to
Another pointer ;-) to this amp being in the first 40 is the pots are
splined but the knob recesses plain round, relying (or not in one case) on
the splines forming enough graunched plastic to hold.
splined but the knob recesses plain round, relying (or not in one case) on
the splines forming enough graunched plastic to hold.
Ron
Jul 5, 2009, 10:59:12 AM7/5/09
to
several makes of replacement pots including the Alps subminiature ones
and the TT short splined shaft. There are also Bourns guitar pots with
both long and short bush.
You'll find them in the current 'Sounds and FX' brochure, next to last page.
Ron
0 new messages