Thanks
They are a different voltage and a completely different chemistry. I
see no reason why a NiCad charger would work properly on them.
-
-----------------------------------------------
Jim Adney jad...@vwtype3.org
Madison,Wisconsin USA
-----------------------------------------------
You MUST use the rayovac charger. I have one even though I don't use
renewal batteries because they are also excellent Ni-Cd and Ni-MH
chargers that will charge an odd number of batteries and tell you when
each one is done.
--
Andy Cuffe
balt...@psu.edu
These newer chargers monitor how the battery is accepting a charge to
determine when to cutoff the recharge power. This complexity was never
required by a NiCd or Lead Acid battery which is why older chargers
cannot be used on newer battery technologies.
> NiCd, like lead acid, can be recharged with a constant voltage and will
> not overcharge. But the newer battery technologies have different
> recharging curves. IOW these other technologies can be overcharged.
> Lithium Ion rechargeables are even dangerous because if overcharged, then
> they can explode.
NiCd at constant voltage? Maybe at a voltage too low to be useful. NiCds
are normally charged at constant (or at least controlled) current possibly
with voltage sensing to determine end-of-charge.
--- sam | Sci.Electronics.Repair FAQ Home Page: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Site Info: http://www.repairfaq.org/REPAIR/F_mirror.html
"Timothy" <tim...@ptd.net> wrote in message
news:e9b93aec.01092...@posting.google.com...