Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

RCA tv eeprom dump?

0 views
Skip to first unread message

Ken_B

unread,
Jan 22, 2003, 10:51:37 PM1/22/03
to
Can anyone tell me where to get an eeprom dump for RCA F20351SFFB1
(CTC175E)?

user

unread,
Jan 22, 2003, 11:18:35 PM1/22/03
to
A saved Chipper Check file from a prior repair on the same chassis.
The non-chassis aligned values can be downloaded from a new eeprom for that
chassis.
David

Ken_B <ken5229"at"softhome.net> wrote in message
news:v2upmgp...@corp.supernews.com...


> Can anyone tell me where to get an eeprom dump for RCA F20351SFFB1
> (CTC175E)?
>
>
>


-----------== Posted via Newsfeed.Com - Uncensored Usenet News ==----------
http://www.newsfeed.com The #1 Newsgroup Service in the World!
-----= Over 100,000 Newsgroups - Unlimited Fast Downloads - 19 Servers =-----

Ken_B

unread,
Jan 23, 2003, 11:06:26 AM1/23/03
to
That's what I am looking for...some saved images from Chipper Checker or
other eeprom programmer.


"user" <us...@home.net> wrote in message
news:3e2f6...@corp-goliath.newsgroups.com...

user

unread,
Jan 23, 2003, 12:11:29 PM1/23/03
to
The next question is, do you have an eeprom programmer to dump it into an
eeprom?
The data locations are not in order as in the service menu.

I do not have a file for that specific chassis. By the time Chipper Check
software hit for the ctc176/177/187, the small 19" and 20" sets almost
stopped coming in for repair ever as people simply tossed the set rather
than fixing as replacement was getting close to the $129 mark.

David

Ken_B <ken5229"at"softhome.net> wrote in message

news:v305gej...@corp.supernews.com...

Ken_B

unread,
Jan 23, 2003, 3:54:44 PM1/23/03
to
Yes, I have a programmer, and have dumped the two eeproms I have, and as I
mentioned previously the dumps are totally different, except for the first
two lines. Also the chips were two different types: the original is a 24C02,
and the replacement is a 24C08.

The main problem I am trying to solve are the inability to turn on stereo.
If I just new what section of the eeprom controlled those setup menu
options, I could experiment. I think the replacement eeprom I ordered from
RCA was totally wrong, since I had even less setup menu options available.
It's the setup options I'm trying to repair. Thanks for the reply, David.

Ken

"user" <us...@home.net> wrote in message

news:3e301...@corp-goliath.newsgroups.com...

0 new messages