Nasty short bursts of high power did not show any spurious ringing or
unwanted oscillation of the Hi-amp anyway. Crude visual pk-pk of noise
on scope was about 80mV on 8R load on hi-amp output with shorted input
and main volume at max and Hi-Master volume at max, other controls at
mid. Warming U1 ic,localised, to about 80-100 deg C made the noise level
jump to about 200mV . Squirting freezer spray could make a minimum of
50mV but would then jump up and down abruptly between about 80 and
150mV, between discrete levels, which is probably what was most
intrusive in use proper, the hiss varying in level.
Localised heating of the other ICs nothing observable on scope. So out
with U1.
What did we use before freezer spray?, I suppose alcohol on a cotton
ball and blowing breath through a straw.