symphonic W9TVCRG

[Ron Osborn]

I have a Symphonic W9TVCRG combo that keeps blowing
D1655 after about 5 hours of play. This is a 16 volt zener the
voltage on that line is 12.2 volts, but apparently it goes up
after warm up. I can't make it act up with heat. Does anyone
have any suggestions. Thanks Dan

[Jerry G.]

I would check out all the filter caps, and the output voltages from
the supply. You definatly may have a fault in the powersupply that is
driving the output too strong...!

I never worked on this model, therefore without direct hands on, I
cannot help you farther...

--

Jerry Greenberg
http://www.zoom-one.com/electron.htm
=============================================

Quick Reply To: jerr...@hotmail.com
We Specialize In Elecronic Componets

WebSite 1: http://www.total.net/~jerryg
Website 2: http://www.zoom-one.com

If It Works, Don't Fix It !
If It Don't Move, Slap It !
If It Don't Make Noise, Shake It !
If It's Broke, Then Fix It ... !
If You Don't Know How To Fix It, Give It Out !

============= Message Separator ================

Ron Osborn wrote in message <72fegf$1mc$1...@juliana.sprynet.com>...