Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

child lock on sharp VCRS

0 views
Skip to first unread message

Eric

unread,
Sep 12, 2005, 2:25:48 PM9/12/05
to
Does anyone know how to disable the child lock on a sharp VCR were the
PINumber has been forgotten?


nvic

unread,
Sep 13, 2005, 8:40:38 PM9/13/05
to
usually four zeros

Eric

unread,
Sep 20, 2005, 11:33:22 AM9/20/05
to
thanks for that nvic
Sorry I never got back to you
I was tring to help someone else out and they have not got back to me

I had a few other, I fiind via google, but it appears they did not work

VCM26
Child lock removal (pin no n/k)
Press & hold lock key on r/c - lock symbol then displayed, Press & hold
st/by on r/c & front of vcr for 3 secs. VCR will shut down & clear child
lock


Simultaneously press the standby buttons on the
front panel and the remote control.


VCMH67
Childlock removal when PIN not known
Press "Childlock" on R/C - when display changes to 4 dashes waiting for
correct code press St/by on R/C & front panel together

nvic <nv...@comcast.net> wrote in message
news:1126658438....@f14g2000cwb.googlegroups.com...
usually four zeros


Eric

unread,
Sep 20, 2005, 1:16:07 PM9/20/05
to
Message has been deleted

nvic

unread,
Sep 23, 2005, 9:03:50 PM9/23/05
to
I tested other ways of removing the child lock from sharp VCRs. The
four zeros, i also was able to get it to un set via unplugging.
sometimes, you can't remove the child lock with these methods. Is the
child lock called "Tamper Proof" and is there a key symbol in the
display? If so, check the manual for this info (troubleshooting
section). Please let me know, nvic

Gerard Bok

unread,
Sep 24, 2005, 12:32:01 PM9/24/05
to

My Sharp VCR unlocks when the play button is kept depressed for 5
or more seconds :-)

--
Kind regards,
Gerard Bok

Eric

unread,
Sep 24, 2005, 3:58:49 PM9/24/05
to
Is that on the VCR or the remote?


Gerard Bok <bok...@zonnet.nl> wrote in message
news:43357ed0...@News.Individual.NET...

Gerard Bok

unread,
Sep 26, 2005, 6:33:46 AM9/26/05
to

Sorry. I have to correct my earlier reply.
I went to test your question and found out, that my Sharp does
not unlock on '5 seconds play'. (Akai will though :-)

Sharp has a 'key'-key on the remote control only.
The manual says, that pulling the mains plug for an hour or two
will reset the child lock.

Eric

unread,
Sep 26, 2005, 11:35:00 AM9/26/05
to
On one old set (can not remember the make, model) I removed the back up
battery


Once I even took out the EEPROM and saved it to computer file, cleared it,
then put the EEPROM back, I think from memory it worked.

Gerard Bok <bok...@zonnet.nl> wrote in message

news:4337cdd1...@News.Individual.NET...

0 new messages