Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Re: Failure modes of fridge thermostat?
38 views
Skip to first unread message
Message has been deleted
Rheilly Phoull
Jun 29, 2015, 6:46:04 AM6/29/15
to
"Charlie+" wrote in message
news:i8u1papf90vqt5367...@4ax.com...
Just had a failure and had to replace with a new thermostat/temp control
(cost about £12), fridge now works fine again.
This is a gas operated thermostat that works a simple built in on/off
microswitch, the knob is to set the switch temp. point. The gas bellows
and capillary pipe is operating and undamaged. Age about 20 years. Mine
failed in the fact that it wouldnt switch once in the off or on state.
For info pic. here:
https://www.dropbox.com/s/jxl1sd21cj7sqqb/Thermostat%20%28fridge%29.jpg?dl=0
Anyone know what fails in these units? Seems not much to go wrong as
long as the gas parts are undamaged? Before I have to destructively
disect it!! C+
After 20 years mechanical wear in the switching lever etc. leads to
intermittent operation also the contacts can wear out as well.
news:i8u1papf90vqt5367...@4ax.com...
Just had a failure and had to replace with a new thermostat/temp control
(cost about £12), fridge now works fine again.
This is a gas operated thermostat that works a simple built in on/off
microswitch, the knob is to set the switch temp. point. The gas bellows
and capillary pipe is operating and undamaged. Age about 20 years. Mine
failed in the fact that it wouldnt switch once in the off or on state.
For info pic. here:
https://www.dropbox.com/s/jxl1sd21cj7sqqb/Thermostat%20%28fridge%29.jpg?dl=0
Anyone know what fails in these units? Seems not much to go wrong as
long as the gas parts are undamaged? Before I have to destructively
disect it!! C+
After 20 years mechanical wear in the switching lever etc. leads to
intermittent operation also the contacts can wear out as well.
Jeff Liebermann
Jun 29, 2015, 11:03:21 AM6/29/15
to
On Mon, 29 Jun 2015 09:45:10 +0100, Charlie+ <cha...@xxx.net> wrote:
>https://www.dropbox.com/s/jxl1sd21cj7sqqb/Thermostat%20%28fridge%29.jpg?dl=0
>
>Anyone know what fails in these units? Seems not much to go wrong as
>long as the gas parts are undamaged? Before I have to destructively
>disect it!! C+
Here's a cross section of the guts:
>https://www.dropbox.com/s/jxl1sd21cj7sqqb/Thermostat%20%28fridge%29.jpg?dl=0
>
>Anyone know what fails in these units? Seems not much to go wrong as
>long as the gas parts are undamaged? Before I have to destructively
>disect it!! C+
<http://appliancerepaircourses.com/wp-content/uploads/2013/09/Appliance-Correspondence-Course-Figure-1.52.jpg>
I once took one apart, but didn't find anything profound.
My rule of thumb is "if it moves, it breaks". Therefore, the first
things I suspect are the parts that move. My best guess(tm) is the
arm that pushes the contacts, which moves every time the thermostat
cycles[1]. When you tear it apart, look for wear. Also look for
arced contacts.
[1] My fridge cycles about once every 15 minutes or 35,000 times per
year. I would guess(tm) that the switch were good for 100,000 cycles
or about 3 years.
--
Jeff Liebermann je...@cruzio.com
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558
Message has been deleted
Jon Elson
Jul 2, 2015, 4:03:06 PM7/2/15
to
Charlie+ wrote:
> Just had a failure and had to replace with a new thermostat/temp control
> (cost about £12), fridge now works fine again.
> This is a gas operated thermostat that works a simple built in on/off
> microswitch, the knob is to set the switch temp. point. The gas bellows
> and capillary pipe is operating and undamaged. Age about 20 years. Mine
> failed in the fact that it wouldnt switch once in the off or on state.
>
> For info pic. here:
>
> Just had a failure and had to replace with a new thermostat/temp control
> (cost about £12), fridge now works fine again.
> This is a gas operated thermostat that works a simple built in on/off
> microswitch, the knob is to set the switch temp. point. The gas bellows
> and capillary pipe is operating and undamaged. Age about 20 years. Mine
> failed in the fact that it wouldnt switch once in the off or on state.
>
> For info pic. here:
>
https://www.dropbox.com/s/jxl1sd21cj7sqqb/Thermostat%20%28fridge%29.jpg?dl=0
>
> Anyone know what fails in these units? Seems not much to go wrong as
> long as the gas parts are undamaged? Before I have to destructively
> disect it!! C+
There is an over-center spring in the tyupical "microswitch". It is made
>
> Anyone know what fails in these units? Seems not much to go wrong as
> long as the gas parts are undamaged? Before I have to destructively
> disect it!! C+
from a single strip of phosphor-bronze spring material with some slots
stamped in it. The middle strip bows and flips from one side to the other
of the outer part of the strip, making it bistable. Either the contacts
erode, or the spring develops fatigue. No sane way to repair them, but
often the switch is a standard size and can be replaced, if a complete
replacement unit can't be had.
Jon
0 new messages