Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Electronic Mass Air Flow Sensor
4 views
Skip to first unread message
Guv Bob
Feb 1, 2012, 11:20:55 PM2/1/12
to
I'm running out of luck with the car groups, and thought maybe one of the electronics gurus here might point me in the right direction with this.
I'm looking to buy (or preferably repair myself) a mass air flow transmitter from a 1990 Mitsubishi Eclipse (same as Eagle Talon, Plymouth Laser). This one's DOHC non-turbo.
Here's the sensor:
http://tinyurl.com/MassAirFlowSensor-90-Eclipse
New part is $650, used is $450. None at the local junk yards around here.
Anyone have any tips on rebuilding one of these or know anyone who can do it for less than $200?
Thanks in advance.
Bob
I'm looking to buy (or preferably repair myself) a mass air flow transmitter from a 1990 Mitsubishi Eclipse (same as Eagle Talon, Plymouth Laser). This one's DOHC non-turbo.
Here's the sensor:
http://tinyurl.com/MassAirFlowSensor-90-Eclipse
New part is $650, used is $450. None at the local junk yards around here.
Anyone have any tips on rebuilding one of these or know anyone who can do it for less than $200?
Thanks in advance.
Bob
Jamie
Feb 2, 2012, 6:43:41 PM2/2/12
to
It seems anything electronic on a car these days gets a large price tag.
I recently converted a diesel fuel control module that mounts on the
engine over to a stand alone unit on the firewall. It seems that this
was once done before however, the source dried up. This was for a GMC
pick up truck.
In your case, you should maybe investigate the inners of the
defective unit. You must have some one you know around you that is handy
with electronics? Air flow sensors are pretty easy to do, you could have a
vane type to spins shaft with a sensor or generator, thermo
displacement, ultrasonic or just a simple shutter type attached to a
position sensor. etc..
Get your hands on a broken one or something if you can't free up your
car to look into this.
Jamie
Jeff Liebermann
Feb 2, 2012, 8:15:55 PM2/2/12
to
On Wed, 1 Feb 2012 20:20:55 -0800, "Guv Bob"
<guvbo...@yahooooooooooooooo.com> wrote:
>I'm running out of luck with the car groups, and thought
>maybe one of the electronics gurus here might point
>me in the right direction with this.
>I'm looking to buy (or preferably repair myself) a mass
>air flow transmitter from a 1990 Mitsubishi Eclipse
>(same as Eagle Talon, Plymouth Laser). This one's DOHC non-turbo.
>
>Here's the sensor:
>http://tinyurl.com/MassAirFlowSensor-90-Eclipse
Broken link. Nobody home. Try again please.
<guvbo...@yahooooooooooooooo.com> wrote:
>I'm running out of luck with the car groups, and thought
>maybe one of the electronics gurus here might point
>me in the right direction with this.
>I'm looking to buy (or preferably repair myself) a mass
>air flow transmitter from a 1990 Mitsubishi Eclipse
>(same as Eagle Talon, Plymouth Laser). This one's DOHC non-turbo.
>
>Here's the sensor:
>http://tinyurl.com/MassAirFlowSensor-90-Eclipse
>New part is $650, used is $450. None at the local junk yards around here.
>Anyone have any tips on rebuilding one of these or know anyone who can do it for less than $200?
Are you absolutely sure that it's the MAF that's busted?
Have you cleaned the electrical connections?
Do you have any test equipment such as a EDB2 scanner, DVM, or scope?
Do you have any automotive repair experience?
According to Google search, the Mitsubishi Eclipse uses a Karman
vortex sensor. I'm not sure if that's correct. See:
<http://en.wikipedia.org/wiki/Mass_flow_sensor#K.C3.A1rm.C3.A1n_vortex_sensor>
<http://www.autoshop101.com/forms/h34.pdf>
<http://www.youtube.com/watch?v=gd640ImE9Ec>
<http://www.youtube.com/watch?v=NRIDW0xRmYo>
<http://www.ehow.com/how_5163433_repair-mass-air-flow-sensor.html>
<http://www.popularmechanics.com/cars/how-to/repair-questions/3297276>
<http://www.youtube.com/watch?v=nNpwk3qtZok>
There's a limited number of things that can break in such a simple
device. When you post a URL that work, I can suggest where to stick
the oscillosope (for the vortex type sensor) to see if there are any
pulses coming out, or where to stick the volts guesser (for the hot
wire and thermistor type) to see if either is busted.
Incidentally, I fixed the MAF on my neighbors Mitsubishi something. I
removed it, cleaned out all the soot, tar, dirt, and filth with a
bursh, cleaned the contacts, reset the ECU, and saved them a few
hundred dollars. However, that was a hot wire type, which uses very
tiny platinum wires. Touch them with a heavy hand, and they'll break.
<http://www.youtube.com/watch?v=wFTP4TzMLxE&feature=related>
Note that you really don't want to use any really strong solvents or
ones that leave a residue. Use the right cleaner:
<http://www.amazon.com/CRC-05110-Mass-Sensor-Cleaner/dp/B000J19XSA>
<http://www.youtube.com/watch?v=wFTP4TzMLxE>
--
Jeff Liebermann je...@cruzio.com
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558
Jeff Liebermann
Feb 2, 2012, 8:21:27 PM2/2/12
to
On Thu, 02 Feb 2012 17:15:55 -0800, Jeff Liebermann <je...@cruzio.com>
wrote:
One more. This one offers diagnostics that can be done with a scope
and DVM.
<http://www.youtube.com/watch?v=sSuL58YEH-E>
Plenty more on YouTube.
wrote:
One more. This one offers diagnostics that can be done with a scope
and DVM.
<http://www.youtube.com/watch?v=sSuL58YEH-E>
Plenty more on YouTube.
Guv Bob
Feb 17, 2012, 1:53:52 AM2/17/12
to
"Jeff Liebermann" <je...@cruzio.com> wrote in message news:2vbmi7tc3h14j733n...@4ax.com...
http://www.redlinemotive.com/store/replacement/wizard.asp?year=1990&make=MI&model=ECL--002&category=B&part=Air+Mass+Meter
> >New part is $650, used is $450. None at the local junk yards around here.
>
> Ouch.
>
> >Anyone have any tips on rebuilding one of these or know anyone who can do it for less than $200?
>
> Start with some rhetorical questions:
> Are you absolutely sure that it's the MAF that's busted?
No, but 3 mechanics said that would their first guess, including the dealer.
I found one online for $169, replaced it. Some improvement, but still runs rich at cold or hot idle and at road speed.
> Have you cleaned the electrical connections?
Yes, checked and cleaned those and all the vacuum connections I could find.
> Do you have any test equipment such as a EDB2 scanner, DVM, or scope?
DVM only but don't know what to check or what voltage/current. I was told this air sensor modulates an output frequency and not voltage or current. Don't have a frequency meter.
> Do you have any automotive repair experience?
Shade tree mechanic. Pretty fair with pre-computerized systems.
> According to Google search, the Mitsubishi Eclipse uses a Karman
> vortex sensor. I'm not sure if that's correct. See:
> <http://en.wikipedia.org/wiki/Mass_flow_sensor#K.C3.A1rm.C3.A1n_vortex_sensor>
> <http://www.autoshop101.com/forms/h34.pdf>
> <http://www.youtube.com/watch?v=gd640ImE9Ec>
> <http://www.youtube.com/watch?v=NRIDW0xRmYo>
> <http://www.ehow.com/how_5163433_repair-mass-air-flow-sensor.html>
> <http://www.popularmechanics.com/cars/how-to/repair-questions/3297276>
> <http://www.youtube.com/watch?v=nNpwk3qtZok>
Many thanks - I'll check each one! Had to take a break from the car repair (on the honey do circuit this week) Will be back on it in a few days.
> There's a limited number of things that can break in such a simple
> device. When you post a URL that work, I can suggest where to stick
> the oscillosope (for the vortex type sensor) to see if there are any
> pulses coming out, or where to stick the volts guesser (for the hot
> wire and thermistor type) to see if either is busted.
>
> Incidentally, I fixed the MAF on my neighbors Mitsubishi something. I
> removed it, cleaned out all the soot, tar, dirt, and filth with a
> bursh, cleaned the contacts, reset the ECU, and saved them a few
> hundred dollars. However, that was a hot wire type, which uses very
> tiny platinum wires. Touch them with a heavy hand, and they'll break.
> <http://www.youtube.com/watch?v=wFTP4TzMLxE&feature=related>
> Note that you really don't want to use any really strong solvents or
> ones that leave a residue. Use the right cleaner:
> <http://www.amazon.com/CRC-05110-Mass-Sensor-Cleaner/dp/B000J19XSA>
> <http://www.youtube.com/watch?v=wFTP4TzMLxE>
Glad you posted all this. I'm not that advanced, but here's my fix-it story. This car died about 10 years ago and the mechanic isolated to the compuer. At that time it was $500+ for a rebuilt. I took the computer home and open it up. Smell a burnt capacitor -- if you've ever smell one, you never forget it. Pulled it and replaced it for 10-cents. Put the computer back in and it's still running 10 years later. Look up dumb luck in the dictionary and you'll see my picutre. LOL!!!
> --
> Jeff Liebermann je...@cruzio.com
> 150 Felker St #D http://www.LearnByDestroying.com
> Santa Cruz CA 95060 http://802.11junk.com
> Skype: JeffLiebermann AE6KS 831-336-2558
My favorite of all mascot is the UC Santa Cruz banana slug. What a sense of humor they have! Beats the tar out of the UC Irvine Anteaters. LOL!!!
http://www.ucsc.edu/about/mascot.html
Bob
Still slugging way (ugh...)
> On Wed, 1 Feb 2012 20:20:55 -0800, "Guv Bob"
> <guvbo...@yahooooooooooooooo.com> wrote:
>
> >I'm running out of luck with the car groups, and thought
> >maybe one of the electronics gurus here might point
> >me in the right direction with this.
>
> >I'm looking to buy (or preferably repair myself) a mass
> >air flow transmitter from a 1990 Mitsubishi Eclipse
> >(same as Eagle Talon, Plymouth Laser). This one's DOHC non-turbo.
> >
> >Here's the sensor:
> >http://tinyurl.com/MassAirFlowSensor-90-Eclipse
>
> Broken link. Nobody home. Try again please.
Seems to work for me. Here's the target....
> <guvbo...@yahooooooooooooooo.com> wrote:
>
> >I'm running out of luck with the car groups, and thought
> >maybe one of the electronics gurus here might point
> >me in the right direction with this.
>
> >I'm looking to buy (or preferably repair myself) a mass
> >air flow transmitter from a 1990 Mitsubishi Eclipse
> >(same as Eagle Talon, Plymouth Laser). This one's DOHC non-turbo.
> >
> >Here's the sensor:
> >http://tinyurl.com/MassAirFlowSensor-90-Eclipse
>
> Broken link. Nobody home. Try again please.
http://www.redlinemotive.com/store/replacement/wizard.asp?year=1990&make=MI&model=ECL--002&category=B&part=Air+Mass+Meter
> >New part is $650, used is $450. None at the local junk yards around here.
>
> Ouch.
>
> >Anyone have any tips on rebuilding one of these or know anyone who can do it for less than $200?
>
> Start with some rhetorical questions:
> Are you absolutely sure that it's the MAF that's busted?
I found one online for $169, replaced it. Some improvement, but still runs rich at cold or hot idle and at road speed.
> Have you cleaned the electrical connections?
> Do you have any test equipment such as a EDB2 scanner, DVM, or scope?
> Do you have any automotive repair experience?
> According to Google search, the Mitsubishi Eclipse uses a Karman
> vortex sensor. I'm not sure if that's correct. See:
> <http://en.wikipedia.org/wiki/Mass_flow_sensor#K.C3.A1rm.C3.A1n_vortex_sensor>
> <http://www.autoshop101.com/forms/h34.pdf>
> <http://www.youtube.com/watch?v=gd640ImE9Ec>
> <http://www.youtube.com/watch?v=NRIDW0xRmYo>
> <http://www.ehow.com/how_5163433_repair-mass-air-flow-sensor.html>
> <http://www.popularmechanics.com/cars/how-to/repair-questions/3297276>
> <http://www.youtube.com/watch?v=nNpwk3qtZok>
> There's a limited number of things that can break in such a simple
> device. When you post a URL that work, I can suggest where to stick
> the oscillosope (for the vortex type sensor) to see if there are any
> pulses coming out, or where to stick the volts guesser (for the hot
> wire and thermistor type) to see if either is busted.
>
> Incidentally, I fixed the MAF on my neighbors Mitsubishi something. I
> removed it, cleaned out all the soot, tar, dirt, and filth with a
> bursh, cleaned the contacts, reset the ECU, and saved them a few
> hundred dollars. However, that was a hot wire type, which uses very
> tiny platinum wires. Touch them with a heavy hand, and they'll break.
> <http://www.youtube.com/watch?v=wFTP4TzMLxE&feature=related>
> Note that you really don't want to use any really strong solvents or
> ones that leave a residue. Use the right cleaner:
> <http://www.amazon.com/CRC-05110-Mass-Sensor-Cleaner/dp/B000J19XSA>
> <http://www.youtube.com/watch?v=wFTP4TzMLxE>
> --
> Jeff Liebermann je...@cruzio.com
> 150 Felker St #D http://www.LearnByDestroying.com
> Santa Cruz CA 95060 http://802.11junk.com
> Skype: JeffLiebermann AE6KS 831-336-2558
http://www.ucsc.edu/about/mascot.html
Bob
Still slugging way (ugh...)
Jeff Liebermann
Feb 17, 2012, 7:01:34 PM2/17/12
to
On Thu, 16 Feb 2012 22:53:52 -0800, "Guv Bob"
<guvbo...@yahooooooooooooooo.com> wrote:
>http://www.redlinemotive.com/store/replacement/wizard.asp?year=1990&make=MI&model=ECL--002&category=B&part=Air+Mass+Meter
>> >New part is $650, used is $450. None at the local junk yards around here.
<guvbo...@yahooooooooooooooo.com> wrote:
>http://www.redlinemotive.com/store/replacement/wizard.asp?year=1990&make=MI&model=ECL--002&category=B&part=Air+Mass+Meter
>> >New part is $650, used is $450. None at the local junk yards around here.
>No, but 3 mechanics said that would their first guess, including the dealer.
I always worry about asking people that have a vested interest in
selling you a replacement part or installation service.
>I found one online for $169, replaced it.
cleaned off the grease and dust.
>Some improvement, but still runs rich at cold or hot idle and at road speed.
if unavailable, Walker.
>> Do you have any test equipment such as a ODB2 scanner, DVM, or scope?
>DVM only but don't know what to check or what voltage/current. I was told
>this air sensor modulates an output frequency and not voltage or current.
>Don't have a frequency meter.
The ODB2 scanner is vital as it will display the error codes produced
>this air sensor modulates an output frequency and not voltage or current.
>Don't have a frequency meter.
by the ECU. They're can be found for as little at $25. Best of the
bunch plug into a laptop, but cost $150. You can watch your mixture
change as the engine warms up.
>> Do you have any automotive repair experience?
>Shade tree mechanic. Pretty fair with pre-computerized systems.
nightmares. We're both at the same level. Auto maintenance is a
survival requirement in todays world. My Learn By Destroying
education tends to be rather expensive but functional. As a last
resort, I've degenerated to reading the manuals.
>> According to Google search, the Mitsubishi Eclipse uses a Karman
>> vortex sensor. I'm not sure if that's correct. See:
>> <http://en.wikipedia.org/wiki/Mass_flow_sensor#K.C3.A1rm.C3.A1n_vortex_sensor>
>> <http://www.autoshop101.com/forms/h34.pdf>
>> <http://www.youtube.com/watch?v=gd640ImE9Ec>
>> <http://www.youtube.com/watch?v=NRIDW0xRmYo>
>> <http://www.ehow.com/how_5163433_repair-mass-air-flow-sensor.html>
>> <http://www.popularmechanics.com/cars/how-to/repair-questions/3297276>
>> <http://www.youtube.com/watch?v=nNpwk3qtZok>
>
>Many thanks - I'll check each one!
>Glad you posted all this. I'm not that advanced, but here's my
>fix-it story. This car died about 10 years ago and the
>mechanic isolated to the compuer. At that time it was $500+
>for a rebuilt. I took the computer home and open it up.
>Smell a burnt capacitor -- if you've ever smell one, you
>never forget it. Pulled it and replaced it for 10-cents.
>Put the computer back in and it's still running 10 years
>later.
caps, I try to use a higher voltage rating than stock.
>Look up dumb luck in the dictionary and you'll
>see my picutre. LOL!!!
repair things is cyclic, much like a biorythm. Some days or weeks, I
can't fix anything. A bit later, everything I touch, magically fixes
itself. I'm sure there's a reason, but I don't want to know.
>My favorite of all mascot is the UC Santa Cruz banana slug.
>What a sense of humor they have! Beats the tar out of the UC
>Irvine Anteaters. LOL!!!
>http://www.ucsc.edu/about/mascot.html
>Bob
>Still slugging way (ugh...)
mascot a banana slug. The adminstration didn't like it, and offered
some other animal instead. After a referendum, the students won.
<http://en.wikipedia.org/wiki/University_of_California,_Santa_Cruz#Mascot>
I liven Ben Lomond, where banana slugs are everywhere. Nothing like
having one leave a trail of slime across the wall. They also prefer a
diet of Motorola service manuals and sticky box labels, both of which
I sometimes find chewed to shreds.
--
# Jeff Liebermann 150 Felker St #D Santa Cruz CA 95060
# 831-336-2558
# http://802.11junk.com je...@cruzio.com
# http://www.LearnByDestroying.com AE6KS
John Ferrell
Feb 20, 2012, 2:08:21 PM2/20/12
to
A blocked catalytic converter will cause things like this. The
computer is struggling to keep up with the problem!
On Thu, 16 Feb 2012 22:53:52 -0800, "Guv Bob"
computer is struggling to keep up with the problem!
On Thu, 16 Feb 2012 22:53:52 -0800, "Guv Bob"
<guvbo...@yahooooooooooooooo.com> wrote:
>"Jeff Liebermann" <je...@cruzio.com> wrote in message news:2vbmi7tc3h14j733n...@4ax.com...
>> On Wed, 1 Feb 2012 20:20:55 -0800, "Guv Bob"
>> <guvbo...@yahooooooooooooooo.com> wrote:
>>
>> >I'm running out of luck with the car groups, and thought
>> >maybe one of the electronics gurus here might point
>> >me in the right direction with this.
>>
>> >I'm looking to buy (or preferably repair myself) a mass
>> >air flow transmitter from a 1990 Mitsubishi Eclipse
>> >(same as Eagle Talon, Plymouth Laser). This one's DOHC non-turbo.
>> >
>> >Here's the sensor:
>> >http://tinyurl.com/MassAirFlowSensor-90-Eclipse
>
John Ferrell W8CCW
>"Jeff Liebermann" <je...@cruzio.com> wrote in message news:2vbmi7tc3h14j733n...@4ax.com...
>> On Wed, 1 Feb 2012 20:20:55 -0800, "Guv Bob"
>> <guvbo...@yahooooooooooooooo.com> wrote:
>>
>> >I'm running out of luck with the car groups, and thought
>> >maybe one of the electronics gurus here might point
>> >me in the right direction with this.
>>
>> >I'm looking to buy (or preferably repair myself) a mass
>> >air flow transmitter from a 1990 Mitsubishi Eclipse
>> >(same as Eagle Talon, Plymouth Laser). This one's DOHC non-turbo.
>> >
>> >Here's the sensor:
>> >http://tinyurl.com/MassAirFlowSensor-90-Eclipse
>
Guv Bob
Feb 29, 2012, 10:03:45 PM2/29/12
to
"John Ferrell" <W8...@arrl.net> wrote in message news:kd65k79l5sp3nao0g...@4ax.com...
> A blocked catalytic converter will cause things like this. The
> computer is struggling to keep up with the problem!
Thanks John. Will be the first thing I check this weekend. A buddy here said he had a similar problem caused by a rat buidling a next in the tail pipe. Would really be nice to look in there and see a rat grinning back.
> computer is struggling to keep up with the problem!
Guv Bob
May 20, 2012, 3:21:26 PM5/20/12
to
"Guv Bob" <guvbo...@yahooooooooooooooo.com> wrote in message news:HrGdnet4UKaKetPS...@earthlink.com...
Finally after several weekends of checking and minor fixes, so real progress...
Took the ECU apart and saw corrosion around 2 capacitors. Scrubbed the board and other board connections looked OK. Replaced the caps with same only 105 deg instead of 85 deg. All symptoms gone at engine cold start. Fine when hot, except when in neutral idle speed cycles between 1300 & 1500 rpm with about 1/2-second cycle time. This is only when up to temp.
TS guides say that's likely in the intake air flow -- mass air flow temp, press or flow sensors, idle speed air sensor, motor, etc.
I'm so jazzed that the main problems are solved that I'm going to call it a day and go have a LARGE burger AND fries!! Maybe even a Bladder Buster to drink. LOL!!!
Bob
Took the ECU apart and saw corrosion around 2 capacitors. Scrubbed the board and other board connections looked OK. Replaced the caps with same only 105 deg instead of 85 deg. All symptoms gone at engine cold start. Fine when hot, except when in neutral idle speed cycles between 1300 & 1500 rpm with about 1/2-second cycle time. This is only when up to temp.
TS guides say that's likely in the intake air flow -- mass air flow temp, press or flow sensors, idle speed air sensor, motor, etc.
I'm so jazzed that the main problems are solved that I'm going to call it a day and go have a LARGE burger AND fries!! Maybe even a Bladder Buster to drink. LOL!!!
Bob
0 new messages