hi i can't make cos it says

[Bork Air]

make: *** No rule to make target 'terminfo', needed by 'qm'.  Stop.

another thread which says that message (A)

https://groups.google.com/g/scarletdme/c/qoBxDSTKCMs/m/8UuZJPICAQAJ

refers to this message (B). which  . message

Nextjob

unread,

Oct 16, 2023, 4:20:11 PM

to ScarletDME

There is an issue with the Makefile.  Take a look at the conversation  "Tried to make and install - failed".

I believe there is a work around listed there.

(B) https://groups.google.com/g/scarletdme/c/ZhLMUk1XU9w/m/4yGs0SGRAwAJ

message b has message deleted. no info

if it makes and goes rite thru. i can go forward. this is of the dev branch on a raspberry pi

thanks

[Bork Air]

ok i got in by removing terminfo from the build

[Bork Air]

now it is saying cannot read pcode when pcode is there this is raspberry pi

dan@to:~/dev $ cd bin
dan@to:~/dev/bin $ ls
libqmcli.so  pcode  qm  qmclilib.so  qmconv  qmfix  qmidx  qmlnxd  qmtic  README
dan@to:~/dev/bin $ ./qm
ScarletDME has not been started
dan@to:~/dev/bin $ ./qm -start
Command requires administrator privileges
dan@to:~/dev/bin $ sudo ./qm -start
Cannot read pcode file - No such file or directory.
dan@to:~/dev/bin $

help

[Bork Air]

last week this was working i dunno if its because its the latest version of raspberry pi os

im not c programmer help ... it should run from dev/bin. should start up

i just want this running help

[Bork Air]

dev is from $HOME/its not 'device'

[Bork Air]

ok is cos /usr/qmsys.//bin

should have pcode in that

i will be ok now thanks

it seems to run now

--
You received this message because you are subscribed to the Google Groups "ScarletDME" group.
To unsubscribe from this group and stop receiving emails from it, send an email to scarletdme+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/scarletdme/7b10d36d-0b86-4cb4-b0e5-d8d132ea1c4bn%40googlegroups.com.