Amcap Software Free Download Full Version With Crack
Kistiñe Dziuk
The demo and the full versions of the application are basically the same provided that the version numbers match in the About box. That means that both versions behave exactly the same way and have the same feature set, the same capabilities and the same restrictions; in other words, what works in one version works in the other and conversely, what does not work in one version does not work in the other either.
Grayed out options in the menu are not limitations of the demo version in any way, they are due to the current configuration of the application (video capture device, video renderer, etc.) Please read through the help file to learn more about this.
This message is not directly related to AMCap. By default, AMCap captures uncompressed video. This message usually means that the .avi file is too large and exceeds 1GB in size. In RegiStax, try to uncheck as many frames as needed from the end of the list and try again or use Windows Live Movie Maker or another video editor to trim the file. Please visit the RegiStax website if you need further assistance with this program.
2. My webcam is not listed in the Devices menu or I either get one of the following messages: "Sorry, you have no video capture hardware." or "Unable to start preview"; or the preview screen is plain green or black. How do I get my webcam to work?
The generic error code does not give any clue about what actually fails. However, this kind of error is usually related to the drivers of either the video capture source (webcam) or the graphics card. Please try these few steps:
The error code simply means invalid (or unsupported) parameter. The driver of your video source may not support flipping and mirroring, this is not a required feature. Try using a V ideo Mixing Renderer as the video renderer in Capture > Setup... menu, Options tab.
VMR9 means Video Mixing Renderer version 9. It is an optimized and enhanced video renderer provided with DirectX 9.0 and later. If the option is grayed out in the View menu, you need to install the latest DirectX 9.0 runtime available from the Windows or Microsoft Update website.
The file size limit does not only depend on the installed Windows system but also on the file system which is either FAT16, FAT32 or NTFS. The size may also be limited by the underlying capture technology. The common file size limits are like this:
The error means that the Sample Grabber, a software component used to make the still captures, is not installed or registered in your system. This usually means that the version of DirectX installed on your PC is outdated. To fix this issue, go to the Windows or Microsoft Update website and install the latest version of DirectX.
13. When the application starts, I get the following error: "Unable to register the application with the Still Image interface. (0x80040154)". I press OK and everything runs fine. How do I fix this?
The capture file is a single working file that is not fragmented and that will be used by the program and the underlying system (DirectShow) to temporarily store the captured video. After every capture, you can save the actual video by using the File > Save Capture Video... menu.
By default, the capture file is called capture.avi and is located in the root of your primary hard drive, in other words it usually is c:\capture.avi. This must be a new file, don't select an existing file otherwise it will be overwritten during the capture or the file allocation.
15. When I enabled the Windows Media 9 Series compression and I attempt to capture a video file, I always get the following error: "Cannot set output file (0x80040154)". What does that error mean and how do I fix it?
The error means that DirectShow is unable to locate the required Windows Media ASF Writer Filter. This component is not installed by default by the system and is only available as a redistributable component as part of the Windows Media Format installer. You can download the installer here or click Help > Redistributable Components > Windows Media Format in AMCap.
16. While installing my webcam, a message popped up and told me that the drivers did not pass the Windows Logo testing and now AMCap says that no video capture source is installed. What's wrong and how do I possibly fix this issue?
Drivers that pass the Windows Logo testing are tested and then digitally signed by Microsoft, this ensures that the drivers meet the quality and stability requirements. Unsigned drivers don't usually mean that they are poor or unreliable, that just means that they were not tested by Microsoft. Because unstable drivers may lead the system to crash and give blue screens (BSOD), the newest 64-bit editions of Windows may require signed drivers to ensure overall stability.
This dialog has two buttons: Continue Anyway and STOP Installation . If you hit the STOP Installation button or press the Enter key, the drivers won't install, this is probably what happened in your case.
You will now be warned when installing unsigned drivers but this won't prevent you from installing them. Once you did this, run the drivers installation again. When the Hardware Installation dialog box pops up again, click Continue Anyway to complete the drivers installation.
18. I always get the following error message when I enable Preview for my webcam: "An error occurred during capture - The supplied user buffer is not valid for the requested operation. (0x800706F8)". What does that mean and how do I fix it?
19. When I press one of the buttons of my scanner and a system dialog box pops up with a list of possible programs to launch for this action, AMCap is listed numerous times. This also happens in the Events tab of the properties of my scanner. How do I remove all those unwanted entries?
20. When AMCap is opened, I get this error message: "You have no video capture hardware. Video capture will not work properly" but I do have a webcam or video capture source. What does that mean?
23. I can successfully record video but I get the following error message if I enable audio recording: "The sample start time is after the sample end time (0x80040228)". What's wrong?
28. Whenever I try to use the overlay feature I get the following error message: "Unable to activate the overlay feature. No such interface supported (0x8004002)". How can I get the overlay feature to work?
The overlay feature requires a video renderer that can mix video streams. The video renderer is implemented by the drivers of the graphics card installed in your system. You may have to select another video renderer (e.g. one of the Video Mixing Renderers), to do so:
29. I am trying to capture still images from the live video preview stream but everytime I press the Enter key (same as Capture > Still Capture > Snap) I get the following error: "Unable to make a still capture when the video renderer is in overlay mode... Catastrophic failure (0x8000FFFF)". How can I get the still capture to work?
This error happens if your webcam does not feature a Still pin (a device feature especially designed to capture still images) and the default video renderer is selected. To work around this issue, please select another video renderer (e.g. one of the Video Mixing Renderers):
33. I just bought the full version of AMCap but Norton Antivirus blocked the installer because it says that it is unsafe. How can I get the full version installed and working now?
To make it clear, Norton AV claims that the installer is unsafe because it is not well-known enough to trust it, that does not mean that it is harmful for your system in any way. Actually, the installer was submitted to the VirusTotal database before publishing and it is perfectly safe.
34. I get the following error message every time I open AMCap: "Unable to start the preview graph - Insufficient system resources exist to complete the requested service. (1450)" How can I get the preview to work?
36. When I attempt to run AMCap, I always get the following error message and I cannot use it at all: "The program can't start because api-ms-win-crt-runtime-l1-1-0.dll is missing from your computer. Try reinstalling the program to fix this problem."
No, version 9.23 and later won't run on Windows XP since the Microsoft libraries are not compatible because this system is not supported by Microsoft anymore. Only version 9.22 and previous were compatible with Windows XP.
No, in most cases, upgrades are just not needed if the current version suits your needs. In seldom cases, I provide a free upgrade if there was a known major bug in the version that you currently own.
AMCap is a user mode application and as such it cannot give BSODs, these latter ones are due to faulty device drivers. Please check for updates from the manufacturer or use the OOBE drivers from Microsoft when possible.
43. When I attempt to start AMCap, I always get this error message: "System error - The program cannot start because api-ms-win-crt-runtime-l1-1-O.dll is missing from your computer. Try reinstalling the program to fix this problem." I already did try to reinstall to no avail. How can I fix this error?
This error shows because the Microsoft Visual C++ Redistributable for Visual Studio 2017 (x86) included in the installer of AMCap fails to install on your system for some reasons. You have to download the installer of this package from the Microsoft website and run it once on your system.
Now you can run the first instance from the Start menu like you did before. Double-click the shortcut on the desktop to run the second instance. You can optionally pin that second instance to the taskbar. Select another webcam in the second instance of AMCap. You can now use the two instances independently and have different settings for both.
7fc3f7cf58