2Make sure the network interface is using an IP in the
192.168.1.0/24 subnet, you can skip this if it is using DHCP, or "obtaining an IP address automatically," which is the default settings for most devices. (You can change the network configuration from Control Panel > Network and Internet > Network Connections, double-click on the connection to Vigor router, then go to TCP/IPv4 Properties. )
3. Open a browser on the computer. In the address bar, enter 192.168.1.1 (which is router's default LAN IP address). Hit Enter, and you will access the router's login page. The default login username and password are both admin. (If you can't open the login page, see Why can't I access my Vigor Router? to troubleshoot)
The default IP Address of the Vigor AP-700 is . What is the default password for the AP-700?The username is 'admin'. On the AP-700 (v1/original) the default password is blank (press enter). On the AP-700 V2 (approx April 2011 onwards, check bottom label) the default password is '1234'. We recommend changing it for security but keep a secure note of it. If you lose your password, it cannot be retrieved.
To factory reset the AP700, press the Reset/WPS button for at least 10 seconds, until the power light blinks rapidly, which indicates that it has reset. If it does not respond, unplug the power and LAN cables from the AP700, plug the power in and wait 30 seconds for it to finish booting, then press the reset button for 10 seconds.
The Draytek 2927 series router is a popular choice for small to medium-sized businesses and home networks due to its advanced features and versatility. Here are the 10 most searched for questions about Draytek 2927 series router configuration:
How to login to the Draytek 2927 series router? The default IP address for the Draytek 2927 series router is 192.168.1.1. To log in, simply enter this address into your web browser, enter the default username and password (admin/admin), and access the web interface for configuration.
How to change the default password on the Draytek 2927 series router? To change the default password on the Draytek 2927 series router, log in to the web interface, navigate to the System Maintenance section, and click on the Administrator Password option. Enter the new password, confirm it, and save the changes.
How to set up WAN on the Draytek 2927 series router? To set up WAN on the Draytek 2927 series router, log in to the web interface, navigate to the WAN settings, and select the type of WAN connection you want to use (Static IP, Dynamic IP, PPPoE, etc.). Fill in the required information, such as the IP address, subnet mask, gateway, and DNS servers.
How to configure port forwarding on the Draytek 2927 series router? To configure port forwarding on the Draytek 2927 series router, log in to the web interface, navigate to the NAT setting, and select the Port Forwarding option. Enter the necessary information, such as the internal IP address of the device you want to forward the ports to and the ports you want to forward.
How to enable VPN on the Draytek 2927 series router? To enable VPN on the Draytek 2927 series router, log in to the web interface, navigate to the VPN settings, and select the VPN Server option. Choose the type of VPN you want to enable (PPTP, L2TP, IPSec, etc.), enter the required information, and save the changes.
How to update the firmware on the Draytek 2927 series router? To update the firmware on the Draytek 2927 series router, log in to the web interface, navigate to the System Maintenance section, and click on the Firmware Upgrade option. Choose the firmware file from your computer, and click on the Upgrade button. The process may take several minutes to complete.
How to configure wireless on the Draytek 2927 series router? To configure wireless on the Draytek 2927 series router, log in to the web interface, navigate to the Wireless settings, and enter the SSID, security type (WPA2, WEP, etc.), and password. You can also choose to enable the guest network and customize its settings.
How to block a website on the Draytek 2927 series router? To block a website on the Draytek 2927 series router, log in to the web interface, navigate to the Content Filter option, and enter the URL of the website you want to block. You can also choose to block websites based on keywords, categories, or schedule.
To prioritize certain types of traffic, you can use the "Classification" section. You can create new classifications by specifying the protocol, source IP, destination IP, and port range, and assigning a priority to each classification.
Note that these steps are general and may vary slightly depending on the firmware version of your router. It's always a good idea to refer to the user manual or the manufacturer's website for specific instructions.
How to set up the Draytek 2927 router for the first time? Setting up the Draytek 2927 router is a simple and straightforward process. First, connect the router to your broadband modem and power it on. Then, open your web browser and type in the default IP address of the router, which is usually "192.168.1.1". Next, log in to the router using the default username and password, which is usually "admin" for both. Finally, follow the on-screen prompts to set up the router, including configuring your network settings, security settings, and wireless network.
In conclusion, the Draytek 2927 series is a powerful and versatile router that offers a range of advanced features for small to medium-sized businesses. Whether you're looking to set up the router for the first time, reset it, set up VPN, or update the firmware, the above answers provide a comprehensive guide to help you get the most out of your router.
Welcome to the
open-sez.me Draytek default passwords page.
Before you open a ticket with Draytek tech support, see if your device or software is in this list. Check the Access Method column to make sure your access method is correct, then try the given default username and password. For the defaults to work in your Draytek device or software, you may need to reset the device or reinstall the software, either of which could cause data loss, so be sure to have backups before you proceed! It's a best practice to have a regular backup schedule in place before disaster strikes!
I can manage the router interface both on the TPLink router I have and the BT homehub (when they are connected), and like I say it runs great in bridge mode, but I still cannot connect to the management interface of the Dratek modem. I tried the solution suggested by manually entering the ip in the IPV4 settings etc, however I cannot find the default gateway address with the modem connected (see pictures) , there is a default gateway showing with the BT Hub connected though.
Licquorice is correct with the setup in his picture where he set the pc's ip to 192.168.2.2 however i would like to add that when i set mine up i connected it directly to the pc via its P2 port and bypassed the router/switch's completely.
Once you get the landing page (192.168.2.1) the login is the classic admin/admin but once in go to LAN/General Setup and it will let you specify a ip that will be used for all future logins (mines set to a high number) once done (mine rebooted) you can then go to System Maintenance/Administrator Password and set a new id (the login will then become admin/[whatever password you set]) at this point it can then be hooked up to the router/phoneline as its supposed to be and you can access it as you would any other device
Thanks also Andy, i will take your advice on board, i was always going to use it in bridge mode (which i was able to do easily) but didn't like the idea of leaving the password as 'admin' it now has a lengthy and complicated password.
Ive been running it for 24 hours now and haven't noticed any changes and the notes seem to hint it's more of a internal maintenance fix (something about the uptime stats now working correctly and a update to the snmp protocol)
Seeing same issues here. No time synchronisation and no option to set this up. Also no option to set gateway or default route to the local lan gateway/router. There is an option to set a default route rule via command line interface, but nor sure that works. Keep experiencing drop out in the vdsl connection.
I left originally in modem/bridge mode, but the Asus could not make a connection? Only when I changed it to Router mode (which with my limited knowledge would appear then to be connecting a router to a router ?
Certainly once it was set up and up and running, (which I managed to achieve) it was fast but at the same time a little laggy for certain things. I have now reverted back to the BT SmartHub and simply connected the Asus to the BT hub and it is much better / more stable.
This should allow me to access the Exchange Server at :443, but it does not. No response when I check that port using e.g. the port scanner at -scan/. If I open up the ports on my dynamic IP address instead, then I do get the expected response on port 443 so at least the principle seems correct.
At index one, I set Protocol to ALL, WAN Interface to WAN2, WAN IP to the static alias 253.81.17.89, Private IP is that of my server 192.168.1.2 and Subnet Mask is /32, i.e. a single address.As soon as I enable this mapping, I can no longer get out onto the internet at all. What am I doing wrong?
I assigned one of the static IPs to the WAN-facing network card of my server. On the router, starting again from the factory defaults I configured the WAN and then, in LAN > General Setup I enabled the IP Routed Subnet. The IP Address I set to 253.81.17.88 (the network address that BT assigned to me) and Subnet Mask to 255.255.255.248. The DHCP Server Configuration section I left empty as I manually set the fixed IP on my server.
The configuration steps I posted in my original article are, in fact, absolutely correct. So if you've got a DrayTek Vigor 2830 or similar device, this is how you can configure it to make use of your multiple static IP addresses without losing your NAT function.
After much perseverance with BT's IT support - who to their credit were very helpful - it turned out that the issue was due to another user having mistyped their username and typed in mine instead, and that user was therefore camping out on my IP range.
Moral of the story: Change your default network password Great service from the IT guys though!
3a8082e126