PBT tak luluskan Rayuan Pos Kawalan

[Admin JK Keselamatan]

Salam semua,

Wakil J/kuasa iaitu En. Hisham dan En. Azman telah bertemu dengan Tuan
SU PBT pada pukul 11.45 pagi pada hari ini ( 4 Okt 2010 ) di atas
tujuan:
(1) Rayuan Pos Kawalan
(2) Permohonan meletakkan Tong Drum di laluan masuk
(3) Menggali parit di lorong 4/12
(4) Memesin rumput di kawalan lalang di laluan masuk antara KTC3 dan
KTC4

Permohonan Bumper telah diluluskan dulu ( 5 unit sahaja)- dalam proses
untuk diagihkan ke lorong 4/5, 4/7, 4/8, 4/12 dan 4/15. Tapi, kena
minta kebenaran dengan penduduk untuk diletakkan di depan rumahnya.

Pos Kawalan telah ditolak sebab PBT memang tak ada peruntukannya.

Tong Drum diluluskan. Mesin rumput dan penggalian parit dlm proses
pertimbangan. InsyaAllah moga-moga dapat.

Sekarang saya buka perbincangan kepada semua untuk membincangkan
bagaimana hendak mendapatkan sumber membina Pos Kawalan?

[Yusoff, Abd Hisham]

Salam Tn S/U,

Pembetulan. Sebenarnya item 3 & 4 juga telah diluluskan oleh PBT (bukan lagi dlm pertimbangan seperti tertulis di bawah) :)

Harap maklum.

Rgds,HY

[Yusoff, Abd Hisham]

Kawan2 Sekalian,

Now we need to combine brains & figure out how to materialize POS KAWALAN (at least bagi sedap mata memandanglah dpd bubuh canopy sekrg tuh)??

Am checking now with Kulim Perdana folks how much were their cost. Will furnish detail
once available.

For time being, let's throw your idea (s)...

Rgds, HY

-----Original Message-----
From: Yusoff, Abd Hisham
Sent: Monday, October 04, 2010 12:52 PM
To: 'save...@googlegroups.com'
Subject: RE: PBT tak luluskan Rayuan Pos Kawalan

Salam Tn S/U,

Pembetulan. Sebenarnya item 3 & 4 juga telah diluluskan oleh PBT (bukan lagi dlm pertimbangan seperti tertulis di bawah) :)

Harap maklum.

Rgds,HY

-----Original Message-----
From: save...@googlegroups.com [mailto:save...@googlegroups.com] On Behalf Of Admin JK Keselamatan
Sent: Monday, October 04, 2010 12:49 PM
To: savektc4
Subject: PBT tak luluskan Rayuan Pos Kawalan

[save...@gmail.com]

Ktc4 folks,
Accdg to En Zul (km perdana chairman), kos dia org buat pos pengawal tu ialah RM5k (termasuk electrical wiring etc). pls b informed.

Rgds,hy

[Mohamad Norizham Hamzah]

Salam.

About the post guard.

Refer to our Kulim Perdana comm.. The costing for the post guard is around 1k. Kerana gotong royong buat sendiri, that why very cheaper. Anyway kita pun boleh buat, Cuma nak cari RM---RM je. Tak semua can contribute, any fellow yg tahu bertukang...bolehlah menyumbang tenaga.

The first important is...how we can get the building material?

Sekian, terima kasih

izham hamzah
PENSYARAH
JABATAN KEJURUTERAAN MEKANIKAL
EXT: 2246 @ 019-5252737

[Amir Sharifuddin Mahayudin]

Salam Am,
RM 1k or 5k? Hisham kata 5k..

Dan kalau kita, kene double up le ccoz kita kene buat 2 post guard..
Erm...setuju ngan cadangan izham, gotong royong buat sama2..tapi kene ada sorang 'kepala' yang pandai bab2 tukang menukang ni...
For me, tolong tengok boleh la..hehee..but it's good idea to reduce cost.

For the building material, the simplest way and faster, circulating to everybody, whoever yang nak donate..ikut ikhlas..
tapi tak bleh nak jamin kita bleh dapat enough fund ke tidak..but at least, we can start with one post guard first.


Regards,
Amir
 
Amir Sharifuddin Mahayudin
Global Commodity Engineering
Celestica Inc. (GSC-Malaysia)
Tel: +60 4 4093 180
Mobile: +60 13 5000 979
Email: ama...@celestica.com
www.celestica.com
Solid Partners. Flexible Solutions.

Mohamad Norizham Hamzah <nori...@ptsb.edu.my> Sent by: save...@googlegroups.com 10/04/2010 03:18 PM Please respond to save...@googlegroups.com

To "save...@googlegroups.com" <save...@googlegroups.com> cc

[save...@gmail.com]

Salam all,
tak pasti izham amnik info dari sapa. Tapi tadi saya ckp sendiri dgn en zul aka "zul denggi", dia mention approx cost is rm5k.depa buat 2 fasa. Fasa1 depa buat gtg-royong, lepas tu gamak x siap kut ..depa "out-source" kat mamat indon (tat's exactly d word yg en zul sebut)..wallahu'alam.
Rgds,hy.

[Ir. Lim JC]

Utk pos kawalan, pendapat saya lebih practical jika out-source sebab selain dari matl, kita perlukan equipment tertentu utk buat. Kemingkinan kos tak beza jauh antara buat gotong dgn out source jika ditambah dgn kos equipment. Mcm manapun, we can try to get quote first.

Utk bump, I believe this is not relate to house breat in, correct me if I am wrong. Fungsi utama bump utk kurangkan laju kenderada. I propose this to be placed kat tmpt2 yang strategic di mana ramai anak muda bawa motor keluar masuk, seperti lorong 4/4 tapi dah ade bump. I don't see much the bump is needed for 4/5 because not many vehicle pass by. Kini ade 2 lorong named 4/5, I am mentioning is the original one besides padang, the new 4/5 is Munu house. Even I can not represent the lorong 4/5 (besides padang), but I would allow bump utk reserve bina kat tempat2 lain yang lebih strategic perlukan bump, even it is not now, but for future.

Item no 3 penting, patut diberi keutamaan. Item 4 juga diberi perhatian, walaupun not as critical as 3.

Good job all!

Regards,
Ir. Lim JC | +60 12-470 7076
(via BlackBerry)

[Mohamad Norizham Hamzah]

Salam.

 

Minta maaf....misundertood....

 

Bukan 1k...@ 3k

 

Minta maaf...silap info

---

From: save...@googlegroups.com [save...@googlegroups.com] On Behalf Of Amir Sharifuddin Mahayudin [ama...@celestica.com]
Sent: Monday, October 04, 2010 6:48 PM