Amateur Satellites "No Data available"

[Peter Pa1ps]

Hello,
I'm missing the Uplink and Downlink frequencies from the Amateur
satellites.
About 1 year ago the data was still available in Satscape.
I've installed Satscape on different 32 and 64bit computers....no
luck.
Update Keps didn't help.
Can you help me?

Thank you very much

Peter Pa1ps

[Satscape]

Apologies Peter, bit of an oversight on my part, so that the data file is no longer downloaded automatically.

Here is the file you need: https://www.sugarsync.com/pf/D7321310_4377531_032560

If you're on Windows 7, place it into the /Users/Peter/Satscape/ folder. You'll see other Satscape files in there too. I'll put a link to the file on the satscape web page too as a temporary measure, but at some point, I'll update Satscape to download automatically again.

[Brad Kellison]

go to www.amsat.org and download the Raw .TXT Keps data and configure satscape to use it.

---------- Original Message ----------
From: Peter Pa1ps <peterb...@hotmail.com>
To: Satscape <sats...@googlegroups.com>
Subject: Amateur Satellites "No Data available"
Date: Tue, 19 Jun 2012 01:19:39 -0700 (PDT)

Hello,
I'm missing the Uplink and Downlink frequencies from the Amateur
satellites.
About 1 year ago the data was still available in Satscape.
I've installed Satscape on different 32 and 64bit computers....no
luck.
Update Keps didn't help.
Can you help me?

Thank you very much

Peter Pa1ps

____________________________________________________________
Fast, Secure, NetZero 4G Mobile Broadband. Try it.
http://www.netzero.net/?refcd=NZINTISP0512T4GOUT2

[Satscape]

I should point out, it's only the data for the satellites that doesn't currently work.

Keplerian elements still update just fine, they're pulled directly from Celestrak every 7 days.

[Brad Kellison]

did you select the right satellites to watch under the groups tab?

____________________________________________________________
53 Year Old Mom Looks 33
The Stunning Results of Her Wrinkle Trick Has Botox Doctors Worried
consumerproducts.com

[Peter man]

Hello Brad,
 
See the screenshots.
Normally at the place of the red cirkel , i see the up and downlink amateur radio frequencies. ( satscape.jpg)
 
This weekend i will install satscape on my home computer to be sure.
I did the installation on 3 office computers ( 2 64 bit and 1 32 bit ) maybe the data is blocked somehow by the firewall?
 

However...when i look at the ARIANE 40 R/B in the Satellie Group "visible" then i see some kind of information. ( satscape2.jpg)

 

I'll let you know if the problem persist on my homecomputer too.

 

Greets Peter Pa1ps

---

From: ka8...@juno.com
Date: Wed, 20 Jun 2012 15:37:07 +0000

[Brad Kellison]

make sure all your files are extracted into one directory.  Then run SatScape.Jar.  Do not rename this file. then when on settings update your keps and select the satellites you want.  Remember to run the .JAR file as it is.

[Peter man]

Hello,
 
Just installed Satscape on a clean W7 32bits machine at my home.
I did unzip the downloaded file in a map called satscap, installed latest Java and started the .jar file.
 
Amateur group is active and the ISS, AO51 and AO27 are favorites. Still no data available for this satellite.
Am i the only one with this problem?
Everything els in the program seems to work perfect. Tabular data view works too.
 
Tomorrow i'll test satscape on a clean XP installed pc.
 

 Peter

---

From: ka8...@juno.com
Date: Fri, 22 Jun 2012 15:46:28 +0000

[Brad Kellison]

Thats weird I run it on Windows 7 Ultimate 32 bit just fine with the latest Java.  did you also get the latest flash and shockwave drivers from Adobe?

[Joe Delahaye]

Hopefully he has it all in one folder/directory. That would include the
satscape.jar file. Mine works just fine and I am running it on 64 bit
Windows now.. I believe you need both versions of Java to make it work,
but it only runs in 32 bit java.

On 23/06/2012 1:26 AM, Brad Kellison wrote:
> Thats weird I run it on Windows 7 Ultimate 32 bit just fine with the
> latest Java. did you also get the latest flash and shockwave drivers
> from Adobe?
>
> ---------- Original Message ----------
> From: Peter man <peterb...@hotmail.com>
> To: <sats...@googlegroups.com>
> Subject: RE: Amateur Satellites "No Data available"
> Date: Fri, 22 Jun 2012 21:44:20 +0000
>
> Hello,
>
> Just installed Satscape on a clean W7 32bits machine at my home.
> I did unzip the downloaded file in a map called satscap, installed
> latest Java and started the .jar file.
>
> Amateur group is active and the ISS, AO51 and AO27 are favorites.
> Still no data available for this satellite.
> Am i the only one with this problem?
> Everything els in the program seems to work perfect. Tabular data view
> works too.
>
> Tomorrow i'll test satscape on a clean XP installed pc.
>
>
> Peter

> ------------------------------------------------------------------------

> From: ka8...@juno.com
> Date: Fri, 22 Jun 2012 15:46:28 +0000
> To: sats...@googlegroups.com
> Subject: RE: Amateur Satellites "No Data available"
>
> make sure all your files are extracted into one directory. Then run
> SatScape.Jar. Do not rename this file. then when on settings update
> your keps and select the satellites you want. Remember to run the
> .JAR file as it is.
>
> ---------- Original Message ----------
> From: Peter man <peterb...@hotmail.com>
> To: <sats...@googlegroups.com>
> Subject: RE: Amateur Satellites "No Data available"
> Date: Fri, 22 Jun 2012 07:10:36 +0000
>
>
> Hello Brad,
>
> See the screenshots.
> Normally at the place of the red cirkel , i see the up and
> downlink amateur radio frequencies. ( satscape.jpg)
>
> This weekend i will install satscape on my home computer to be sure.
> I did the installation on 3 office computers ( 2 64 bit and 1 32 bit )
> maybe the data is blocked somehow by the firewall?
>
> However...when i look at the ARIANE 40 R/B in the Satellie Group
> "visible" then i see some kind of information. ( satscape2.jpg)
> I'll let you know if the problem persist on my homecomputer too.
> Greets Peter Pa1ps

> ------------------------------------------------------------------------

> From: ka8...@juno.com
> Date: Wed, 20 Jun 2012 15:37:07 +0000
> To: sats...@googlegroups.com
> Subject: Re: Amateur Satellites "No Data available"
>
> did you select the right satellites to watch under the groups tab?
>
> ---------- Original Message ----------
> From: Satscape <sats...@gmail.com>
> To: sats...@googlegroups.com
> Subject: Re: Amateur Satellites "No Data available"
> Date: Wed, 20 Jun 2012 03:30:01 -0700 (PDT)
>
> I should point out, it's only the data for the satellites that doesn't
> currently work.
> Keplerian elements still update just fine, they're pulled directly
> from Celestrak every 7 days.
>
>
> On Wednesday, June 20, 2012 6:49:07 AM UTC+1, ka8tok wrote:
>

> go to www.amsat.org <http://www.amsat.org> and download the Raw

> .TXT Keps data and configure satscape to use it.
>
>
> ---------- Original Message ----------
> From: Peter Pa1ps
> To: Satscape <sats...@googlegroups.com
> <mailto:sats...@googlegroups.com>>
> Subject: Amateur Satellites "No Data available"
> Date: Tue, 19 Jun 2012 01:19:39 -0700 (PDT)
>
> Hello,
> I'm missing the Uplink and Downlink frequencies from the Amateur
> satellites.
> About 1 year ago the data was still available in Satscape.
> I've installed Satscape on different 32 and 64bit computers....no
> luck.
> Update Keps didn't help.
> Can you help me?
>
> Thank you very much
>
> Peter Pa1ps
>
>
>
> ____________________________________________________________
> Fast, Secure, NetZero 4G Mobile Broadband. Try it.
> http://www.netzero.net/?refcd=NZINTISP0512T4GOUT2
>
>
>
> ____________________________________________________________

> *53 Year Old Mom Looks 33*

> The Stunning Results of Her Wrinkle Trick Has Botox Doctors Worried

> <http://thirdpartyoffers.juno.com/TGL3132/4fe1ee57c13f88138bbst04vuc>consumerproducts.com
> <http://thirdpartyoffers.juno.com/TGL3132/4fe1ee57c13f88138bbst04vuc>
>
> No virus found in this message.
> Checked by AVG - www.avg.com <http://www.avg.com>
> Version: 2012.0.2180 / Virus Database: 2437/5087 - Release Date: 06/22/12
>

--

-------------------------------------
If you forward this email please delete the forwarding history,
which includes my email address. It is a courtesy to me and others
who may not wish to have their email addresses sent all over the world!
Erasing the history helps prevent Spammers from mining addresses and
sending everyone viruses.

Have a nice day
Joe Delahaye

[Peter man]

 Hello all,
 
I've just installed satscape on a XP professional installation in Virtualbox ( virtual machine).
First i installed Java as advised on the Satscape website.
Then i've downloaded the 32 bits version and unzipped it ( see attached picture 3 )
It automaticly creates a map called Satscape-win32.
 
When i start Satscape by clicking the JAR file, i see a notification that says "could not update Satellite Database, will try again another day".  ! (See picture 1 )
I think this is the Data i'm missing in Satscape??
 

On picture 2 you can see that there is no data available.

 

Peter Pa1ps

 

 

---

From: ka8...@juno.com

Date: Sat, 23 Jun 2012 05:26:10 +0000

[Satscape]

On Friday, June 22, 2012 10:44:20 PM UTC+1, Peter Pa1ps wrote:

Hello,
 
Just installed Satscape on a clean W7 32bits machine at my home.
I did unzip the downloaded file in a map called satscap, installed latest Java and started the .jar file.
 
Amateur group is active and the ISS, AO51 and AO27 are favorites. Still no data available for this satellite.
Am i the only one with this problem?
Everything els in the program seems to work perfect. Tabular data view works too.
 
Tomorrow i'll test satscape on a clean XP installed pc.
 

 Peter

---

From:

Date: Fri, 22 Jun 2012 15:46:28 +0000
To: sats...@googlegroups.com
Subject: RE: Amateur Satellites "No Data available"

make sure all your files are extracted into one directory.  Then run SatScape.Jar.  Do not rename this file. then when on settings update your keps and select the satellites you want.  Remember to run the .JAR file as it is.

---------- Original Message ----------
From: Peter man 
To: <sats...@googlegroups.com>
Subject: RE: Amateur Satellites "No Data available"
Date: Fri, 22 Jun 2012 07:10:36 +0000

Hello Brad,
 
See the screenshots.
Normally at the place of the red cirkel , i see the up and downlink amateur radio frequencies. ( satscape.jpg)
 
This weekend i will install satscape on my home computer to be sure.
I did the installation on 3 office computers ( 2 64 bit and 1 32 bit ) maybe the data is blocked somehow by the firewall?
 

However...when i look at the ARIANE 40 R/B in the Satellie Group "visible" then i see some kind of information. ( satscape2.jpg)

 

I'll let you know if the problem persist on my homecomputer too.

 

Greets Peter Pa1ps

---

From:

Due to various changes to my web site host, the database file containing uplink/download frequencies is no longer automatically downloaded. I shall re-instate this feature at some point, but for now, you can do it manually, if you download the database file, and (if you’re on windows 7) place it into your/User/YOURNAME/satscape/ folder along with the other files. Windows XP is /Documents and settings/YOURNAME/satscape/