Firmware S10 Plus

[Manric Hock]

Iwas encouraged to update the firmware on my 16GB Clip Sport Plus. I wish I had not. I upgraded to the 2.23B version and now the display is too high. I can barely read the menu name and cannot see the battery indicator at all. Please issue a new update to take care of this. I did sent a message to your support team, but only got a request to fill out a survey in return. Someone else on this forum has the same issue.

This seems wrong, as the version that shipped was 1.01B202. Is it possible that SanDisk is shipping Sport Clip Pluses with a later version of software than is available for download and installation by users?

Despite what the representative wrote, the version at SanDisk 32GB Clip Sport Plus Firmware 1.01 and Bluetooth B202 Download and Installation Instructions is version 1.01. Reinstalling this version corrects the screen problem.

But we also need other things as we have with the Vera hubs. Like Being offered a firmware update, being able to see what version you would be upgrading to. Being shown if you are already using the latest published firmware version etc etc.

There is no new sv06 plus firmware yet, if there was it would be here Firmware Download Sovol3d

Unless you have been messing with some 3rd party firmware you should not need to flash a new printer.

I printed the test bench fine when I first received my SV06 plus but since then, every print I attempt has the same problem. Around layer 4, the Z axis stops raising and the nozzle gets dragged through the previous print layer. Any ideas yet?

I am trying to see if I can do a latest Marlin update, if someone has already done so it works with the display let me know. The original source code is already on git, but I can see they merged a few update after the marlin based they used so I need to figure out whats default marlin and whats been coded by sovol.

Modifications and Bug Fixes:

1. Added support for IPTV bridge mode and custom mode.

2. Added IPv6 firewall rules feature.

3. Added Mesh Technology option.

4. Displayed which client is connected to which deco and which Wi-Fi band.

5. Displayed how Decos are connected to each other.

6. Supported up to 64 entries each for Address Reservation and Port Forwarding.

7. Improved the system stability and fixed some bugs.

Notes:

1. Please update your Deco App to the latest version in order to use new features.

2. If there are other Deco models in your Deco network, you may miss some new features till other models release updates in the near future.

As mentioned in this below post, this 1.4.0 version firmware for the Deco M9 Plus can ONLY by updated via the Upgrade Tool and will not be pushed via the Deco app, so it is suggested to upgrade it by following the instructions attached in the firmware download file:

Thanks for your requesting. The 1.2.11 is the latest firmware for the Deco M9 plus; the reason why you cannot get the update is that the 1.2.11 is the original firmware of the new batch Deco M9 plus V2, which means the Deco M9 plus with 1.2.10 or below firmware won't be able to get the updates via Deco app.

Besides, these new features will be added via the firmware upgrading, the engineers are working on it, but the estimated supporting time is still unsure. It is very recommended to keep an eye on the official website or Deco app to get the new info.

Besides, these new features would be added via the firmware upgrading, the engineers are working on it, but the estimated supporting time is still unsure. It is very recommended to keep an eye on official website or Deco app to get the new info.

I used to have a m5 mesh network but added 3 m9 plus v2 stations and changed one of those to become the main unit. All 6 are in access point mode. The software version of the m9 plus is the same as mentioned above. If I now try to login to the web UI on the m9 plus main unit I get the following error:

@Kevin_Z I got the manual update instructions from support and that includes using a upgrade_GDPR.exe tool that support was unable to find for me (they say it shall be part of the firmware zip file, but it is not). So I was stuck on finding that tool.

But now you are refering to a webgui instead for firmware update. I have tried to just enter the IP of my deco units in a webbroswer but it just says no response. So please provide more information on how to access the web gui (I can not even find a webserver in the units). Please note that I'm using AP mode it that has any effect....

A bit strange that you sell these v2 hardware units that are unable to automatic update, why dont you add this information to the firmware page or provide more breif instructions on how to manual update them? I was expecting my DECO to be continously updated when you release new firmare to keep up with possible security patches. Not that it is just silently not updating without any error or notification.

1 Please fix the automatic update (I am actually working with firmware update in my own profesion and the answer why this is not working makes no sense. Normally it is very rare compability issues that prevents updates)

Sorry to respond late; I confirmed again that the Deco M9 plus V2 does not support web UI yet, that is why you failed to access the web UI. While we are working on these new features now. Sorry for my mistake.

And we do have the upgrade tool to do that manually; but if you want to get the new features by upgrading the firmware, I'm afraid that it won't satisfy your needs cause there is no new features added on 1.2.11 yet; it is just the original firmware of Deco M9 plus v2 for some specific areas. No big difference between 1.2.10 and 1.2.11.

Good morning even I can not update the firmware, I download the latest release 2.1.3 on the key supplied with the printer, but it does not keep me going. It tells me that I have the latest version available: 1.1.1

please help me

Your Matrox Maevex product may ship with an older firmware version. Before using your Maevex product, you must update the firmware version installed on your devices to use the version of your deployed release.All Maevex devices on a Maevex network must use the same version of the firmware package. Your firmware package version must also match the package version of your PowerStream Plus software.Depending on the model of your new Maevex device, you may need to move up to a minimum level of Maevex PowerStream Plus Software and Firmware package - please see below for details. Note that the firmware revision will not be the same for the Maevex 5100 devices, 6100 devices and 7100 devices and this is supported as long as they are from the same firmware installation package.Contact Matrox Technical Support for more details.

I'm trying to provision my brand new ProLiant MicroServer Gen10 Plus via Intelligent Provisioning. As i'm supposed to do, according to the note in the box, i've tried to update the firmware, any firmware. It all fails to download.

I'm not sure if this is the correct link. It redirects me to resources regarding the MicroServer Gen10, which is an AMD Opteron machine that's twice as tall as my Intel-based Gen10 Plus. Are you sure this is what i should look at?

Hey @Deemo i'm kinda glad that i'm not the only one with this issue. This tells me, that my/our networking infrastructure/settings are at least similar. OR HPE is still struggling with their scheduled maintenance.

Updating the Intelligent Provisioning (IP) itself did not make things better. In fact the IP seems to be gone now. It doesn't boot up anymore, when i press F10. "Fixing" an issue by removing the defective component would've been the least desirable option.

SUP 2.0 is a major update for the cforce plus motor. It dramatically improves the time it takes for the motor to respond to inputs from the user, making the lens motors twice as responsive. A Tech Talk about this update is available on our Youtube channel here.

NOTICE TO USER: PLEASE READ THIS CONTRACT CAREFULLY. BY ACCEPTING THIS AGREEMENT OR BY USING ALL OR ANY PORTION OF THE SOFTWARE, YOU ACCEPT ALL THE TERMS AND CONDITIONS OF THIS AGREEMENT, INCLUDING, IN PARTICULAR THE LIMITATIONS ON: USE CONTAINED IN SECTION 2; TRANSFERABILITY IN SECTION 4; WARRANTY IN SECTION 5; AND LIABILITY IN SECTION 6, AND WARRANTS THAT YOU ACT AS ENTERPRENEUR AND NOT AS CONSUMER. YOU AGREE THAT THIS AGREEMENT IS ENFORCEABLE LIKE ANY WRITTEN NEGOTIATED AGREEMENT SIGNED BY YOU. THIS AGREEMENT IS ENFORCEABLE AGAINST YOU AND ANY LEGAL ENTITY THAT OBTAINED THE SOFTWARE AND ON WHOSE BEHALF IT IS USED. IF YOU DO NOT AGREE, OR ACT AS CONSUMER, DO NOT USE THIS SOFTWARE.

ARRI and its suppliers own all intellectual property in the Software. ARRI permits you to Use the Software only in accordance with the terms of this Agreement.

1. Definitions. "Software" means (a) all of the contents of the files provided under this Agreement, including but not limited to (i) Software as provided together with this licence agreement for download at the ARRI website, or provided to you whether on disk, in read only memory or any other media or in any other form (ii) any related files to the Software and (iii) related explanatory written materials or files or oral information ("Documentation"); and (b) upgrades, modified versions, updates, bug fixes, additions, and copies of the Software, if any, licensed to you by ARRI, unless they are accompanied by a separate licence or licence agreement (collectively, "Updates"). "Use" or "Using" means to access, install, download, copy, use or otherwise benefit from using the functionality of the Software in accordance with the Documentation. "Free Functionality" means any free functionality which the Software provides automatically without the need for a License Key; "Paid for Functionality" means any functionality of the Software other than Free Functionality, which must be paid for or otherwise requires a License Key; "Licence Key" means a license key which activates and enables use of the Software or any Paid-For Functionality within the Software, for a defined period of time. The scope of the rights and permissions granted by any License Key and its duration will be as specified by ARRI at the time you order and purchase the same from ARRI or are otherwise supplied with the same; "Permitted Number" means one (1) unless otherwise indicated under a valid license (e.g. volume license) granted by ARRI. "Device" means a camera system, accessories and/or any other product manufactured by ARRI, identified by a specific ARRI serial number and internal product code, that is intended, prepared or dedicated for use with the Software and specified in the Software or the order form. "ARRI" means Arnold & Richter Cine Technik GmbH & Co Betriebs KG, Herbert-Bayer-Str. 10, 80807 Mnchen.

2. Software License.

2.1 Free Functionality. As long as you comply with the terms of this software license agreement ("Agreement"), ARRI grants to you a royalty-free, revocable, non-exclusive, non - transferable and purpose restricted license to Use the Free Functionality of the Software for the purposes described in the Documentation and this Agreement. You may install and Use a copy of the Software on your Device and not on a stand-alone basis or in any other way than on such Device, up to the Permitted Number.

2.2 Paid for Functionality. As long as you comply with the terms of this Agreement, ARRI grants to you a royalty-bearing, revocable, non-exclusive, non - transferable and purpose restricted license to Use the Paid for Functionality of the Software for the purposes described in the Documentation and this Agreement. You may Use any Paid-For Functionality of the Software, which is authorized by the License Key(s) you order and purchase from ARRI or which you otherwise validly obtain from ARRI and inputted by you into the Software from time to time, on your Device and not on a stand-alone basis or in any other way than on such Device, up to the Permitted Number. You are responsible for inputting into the Software the code of any License Key to activate the Paid-For Functionality.

2.3 Backup Copy. You may make one backup copy of the Software, provided your backup copy is not installed or used on any other Device. You may not transfer the rights to a backup copy unless you transfer all rights in the Software as provided under this Agreement.

2.4 Title to all Software and all rights not expressly granted to you hereunder shall remain with ARRI. For the avoidance of doubt, this Software License only covers the executable files ARRI supply and does not extend to any source code.

2.5 ARRI shall have no obligation to offer support for the Software, to offer any Updates or any other services related to the Software.

3. Intellectual Property Ownership, Copyright Protection. The Software and any authorized copies that you make are the intellectual property of and are owned by ARRI and its suppliers. The structure, organization and code of the Software are the valuable trade secrets and confidential information of ARRI and its suppliers. The Software is protected by law, including without limitation the copyright laws of the Federal Republic of Germany and other countries, and by international treaty provisions. Except as expressly stated herein, this Agreement does not grant you any intellectual property rights in the Software and all rights not expressly granted are reserved by ARRI and its suppliers.

4. Restrictions.

4.1 Copy. You shall not copy the Software except as set forth in Section 2.3. Any copy of the Software that you make must contain the same copyright and other proprietary notices that appear on or in the Software.

4.2 No Modifications. You shall not modify, adapt or translate the Software. You shall not reverse engineer, decompile, make derivative works, disassemble or otherwise attempt to discover the source code of the Software except to the extent you may be expressly permitted to decompile under applicable law, it is essential to do so in order to achieve operability of the Software with another software program, and you have first requested ARRI to provide the information necessary to achieve such operability and ARRI has not made such information available. ARRI has the right to impose reasonable conditions and to request a reasonable fee before providing such information. Any such information supplied by ARRI and any information obtained by you by such permitted decompiling may only be used by you for the purpose described herein and may not be disclosed to any third party or used to create any software which is substantially similar to the expression of the Software.

4.3 Transfer. You may not rent, lease, sublicense, assign or transfer your rights in the Software, or authorize all or any portion of the Software to be copied onto another user's computer or device except as may be expressly permitted herein. You may, however, transfer all your rights to Use the Software to another person or legal entity provided that: (a) you also transfer (i) this Agreement, and (ii) the Software and all other software or hardware bundled or pre-installed with the Software, including all copies, Updates and prior versions, to such person or entity; (b) you retain no copies, including backups and copies stored on a Device; and (c) the receiving party accepts the terms and conditions of this Agreement and any other terms and conditions upon which you legally purchased a license to the Software. Notwithstanding the foregoing, you may not transfer education, pre-release, or not for resale copies of the Software.

4.4 You may not remove any product identification, proprietary, copyright, trade secret or other notices or legends contained in the Software.

4.5 You agree to permit ARRI to audit your Use of the Software, including allowing us to visit and inspect any Device on which it is installed.

5. NO WARRANTY. The Software is being delivered to you "AS IS" and ARRI makes no warranty as to its use, capabilities or performance. ARRI AND ITS SUPPLIERS DO NOT AND CANNOT WARRANT THE PERFORMANCE OR RESULTS YOU MAY OBTAIN BY USING THE SOFTWARE. EXCEPT FOR ANY WARRANTY, CONDITION, REPRESENTATION OR TERM TO THE EXTENT TO WHICH THE SAME CANNOT OR MAY NOT BE EXCLUDED OR LIMITED BY LAW APPLICABLE TO YOU IN YOUR JURISDICTION, ARRI AND ITS SUPPLIERS MAKE NO WARRANTIES CONDITIONS, REPRESENTATIONS, OR TERMS (EXPRESS OR IMPLIED WHETHER BY STATUTE, COMMON LAW, CUSTOM, USAGE OR OTHERWISE) AS TO ANY MATTER INCLUDING WITHOUT LIMITATION NONINFRINGEMENT OF THIRD PARTY RIGHTS, MERCHANTABILITY, INTEGRATION, SATISFACTORY QUALITY, OR FITNESS FOR ANY PARTICULAR PURPOSE. IF APPLICABLE LAW REQUIRES ANY WARRANTIES WITH RESPECT TO THE FREE FUNCTIONALITY OF THE SOFTWARE, ALL SUCH WARRANTIES ARE LIMITED IN DURATION TO NINETY (90) DAYS FROM THE DATE OF DELIVERY. IF APPLICABLE LAW REQUIRES ANY WARRANTIES WITH RESPECT TO THE PAID FOR FUNCTIONALITY OF THE SOFTWARE, ALL SUCH WARRANTIES ARE LIMITED IN DURATION TO ONE YEAR FROM THE DATE OF DELIVERY. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY ARRI OR ITS EMPLOYEES SHALL CREATE A WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF ANY WARRANTY PROVIDED HEREIN. You must inspect the Software immediately upon its receipt and must notify ARRI in writing of any apparent defects within one week. ARRI must be notified of hidden defects in writing within two weeks of their emergence. In the event that the customer has notified ARRI of defects in a timely manner and is thus eligible to make a claim for re-performance, ARRI shall have the right, at its own cost, either to remedy the defect or to redeliver. Any warranty explicit given by ARRI or constructed under any law theory does not apply if the Software (i) has been altered, except by ARRI, (ii) has been subject to abnormal physical or electrical stress, misuse, negligence or accident or (iii) is used in hazardous activities. The provisions of Section 5 and Section 6 shall survive the termination of this Agreement, howsoever caused, but this shall not imply or create any continued right to Use the Software after termination of this Agreement.

6. LIMITATION OF LIABILITY. IN NO EVENT WILL ARRI OR ITS SUPPLIERS BE LIABLE TO YOU FOR ANY UNFORSEEABLE DAMAGES, CLAIMS OR COSTS WHATSOEVER OR ANY CONSEQUENTIAL, INDIRECT, INCIDENTAL DAMAGES, OR ANY LOST PROFITS OR LOST SAVINGS, EVEN IF AN ARRI REPRESENTATIVE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSS, DAMAGES, CLAIMS OR COSTS OR FOR ANY CLAIM BY ANY THIRD PARTY. THE FOREGOING LIMITATIONS AND EXCLUSIONS APPLY TO THE EXTENT PERMITTED BY APPLICABLE LAW IN YOUR JURISDICTION. ANY LIABILITY OF ARRI OR ITS SUPPLIER FOR DAMAGES ARISING FROM EITHER THIS AGREEMENT, OR YOUR USE OR PERFORMANCE OF THE SOFTWARE, OR THE RESULTS OBTAINED THROUGH USE OF THE SOFTWARE, UNDER ANY LEGAL THEORY, WHETHER IN CONTRACT, EXTRACONTRACTUAL, TORT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE SHALL BE LIMITED EXCLUSIVELY TO REPLACEMENT OF THE SOFTWARE OR REIMBURSEMENT OF THE PRICES PAID BY YOU, AT ARRI'S SOLE OPTION. FURTHERMORE ARRI'S AGGREGATE LIABILITY AND THAT OF ITS SUPPLIERS, EMPLOYEES, DIRECTORS OR OFFICERS UNDER OR IN CONNECTION WITH THIS AGREEMENT SHALL BE LIMITED TO THE AMOUNT PAID FOR THE SOFTWARE. Nothing contained in this Agreement limits ARRI's liability to you in the event of death or personal injury; ARRI's liability resulting from intention or the tort of deceit (fraud), any strict liability or ARRI's liability for typical and foreseeable damages in case of gross negligence or resulting from violation of essential contractual obligations (Kardinalpflichten). ARRI is acting on behalf of its suppliers for the purpose of disclaiming, excluding and/or limiting obligations, warranties and liability as provided in this Agreement, but in no other respects and for no other purpose.

7. Basis of Bargain. The Limited Warranty and Disclaimer and Limited Liability set forth above are fundamental elements of the basis of the agreement between ARRI and you. ARRI would not be able to provide the Software without such limitations. Such Limited Warranty and Disclaimer and Limited Liability inure to the benefit of ARRI's licensors.

8. Term. This Agreement is effective as of the first Use of the Software and continues until terminated as provided herein ("Term"). Either party may terminate this Agreement (including all related Order Forms) if the other party (a) fails to cure any material breach of this Agreement within thirty (30) days after written notice of such breach; (b) ceases operation without a successor; or (c) seeks protection under any bankruptcy, receivership, trust deed, creditors arrangement, composition or comparable proceeding, or if any such proceeding is instituted against such party (and not dismissed within sixty (60) days thereafter).

8.1 Software License Term. The term of Software license or of specific functionality (Free Functionality or Paid for Functionality), shall expire on the expiration date specified on the relevant order form. Notwithstanding the foregoing, the license to any item of Software shall terminate automatically upon your breach of any of the terms of this Agreement relevant to such Software. In addition, you may terminate the license to Software granted hereunder at any time by providing written notice to ARRI, but no such termination shall affect your obligations hereunder.

8.2 Termination. Upon termination of this Agreement, you shall cease any and all use of any Software and shall return or destroy all copies thereof in your possession, custody or control and certify to ARRI in writing.

8.3 Survival. Sections 2.4, 3, 4, 5, 6, 7, 8, 9 and 10 shall survive any termination or expiration of this Agreement.

9. Governing Law. Notwithstanding the place where this Agreement is executed, accepted or where obligations under this Agreement are performed, the parties expressly agree that this Agreement and any claim or controversy arising out of or relating to rights and obligations of the parties under it will be governed by and construed in accordance with the substantive laws of the Federal Republic of Germany, without regard to its conflicts of laws principles or the provisions of the United Nations Convention on Contracts for the International Sale of Goods or the United Nations Convention on the Limitation Period in the International Sale of Goods, as each is amended. The parties consent to the exclusive jurisdiction of the Munich district court (Landgericht Mnchen I) for any dispute arising out of this Agreement, and the parties waive their right to have an action under this Agreement brought or tried elsewhere.

10. General Provisions. If any part of this Agreement is found void and unenforceable, it will not affect the validity of the balance of this Agreement, which shall remain valid and enforceable according to its terms. If for any reason a court of competent jurisdiction finds any provision of this Agreement, or portion thereof, to be unenforceable, that provision of the Agreement will be enforced to the maximum extent permissible so as to effect the intent of the parties. By accepting this Agreement you state explicitly and irrevocable that you are acting as entrepreneur and not as consumer. This Agreement may only be modified by a writing signed by an authorized officer of ARRI. This Agreement and any General Terms of Sales and Delivery of ARRI accepted by you with the relevant order or purchase form are the entire agreement between ARRI and you relating to the Software and it supersedes any prior representations, discussions, undertakings, communications or advertising relating to the Software.

11. Compliance with Licenses. You agree that upon request from ARRI, you will within thirty (30) days fully document and certify that use of any and all Software at the time of the request is in conformity with your valid licenses from ARRI.

"ARRI", "ARRI ARRI", "ALEXA", "AMIRA" are registered trademarks of ARRI in Germany and/or other countries.

3a8082e126