klr doo hickey tools
3 views
Skip to first unread message
livewire
Dec 6, 2011, 5:32:02 PM12/6/11
to Saskatchewan Dual Sport Forum
hey guys new to the forums but just working my 2008 klr doo hickey
upgrade, if you don't already have the tooling for it, i found that a
32mm wrench and a m22x1.5pitch pusher bolt works, both tools i found
around saskatoon, the bolt came from the Local caterpillar dealer,
part number 6Y-9024 and the parts guy didn't even charge me for it
since it is under $5. hope this helps to any of the do it your self
guys on a budget.
upgrade, if you don't already have the tooling for it, i found that a
32mm wrench and a m22x1.5pitch pusher bolt works, both tools i found
around saskatoon, the bolt came from the Local caterpillar dealer,
part number 6Y-9024 and the parts guy didn't even charge me for it
since it is under $5. hope this helps to any of the do it your self
guys on a budget.
jimmyt
Dec 7, 2011, 3:33:24 PM12/7/11
to Saskatchewan Dual Sport Forum
If I was to do this again on an 08+ bike I would just replace the
spring with the spiral one. The doohikey itself seems to be pretty
good. You still need the tools though.
spring with the spiral one. The doohikey itself seems to be pretty
good. You still need the tools though.
kiffernathan
Dec 15, 2011, 2:12:37 PM12/15/11
to Saskatchewan Dual Sport Forum
Thanks for sharing that info. I've already done my doohickey, but
it's good to know!
it's good to know!
Chris
2007 KLR 650
2000 XR650R
2007 Versys
> > guys on a budget.- Hide quoted text -
>
> - Show quoted text -
Reply all
Reply to author
Forward
0 new messages