Windows 11 Dongle Driver Error
Cameron Fluet
Bluetooth Device Driver errors are common problem users of Bluetooth face from time to time. The drivers are operating systems used in Windows and different Windows such as Windows 10, 8, and 7 use different drivers. What this means is that if you have an incompatible driver on your device you may not be able to send and receive data with ease. This article treats how to fix Bluetooth Adapter driver issues.
Most often than not, errors may occur when the required driver needed for your Bluetooth to function is either corrupted or missing. There may be other reasons but corrupted and missing drives are the major reasons why you may see this kind of error when you try using Bluetooth on your PC.
If your Bluetooth suddenly goes missing, take the time to check your device's specifications to ensure that it has the correct Bluetooth capabilities. This information is crucial because some desktop computers and laptops do not have Bluetooth devices. If you are a Mac user, refer to the fixes for Bluetooth not turning on for Mac.
Your Bluetooth may not be able to send or receive data for several reasons but that doesn't mean that the device is bad. It may be as a result of missing or outdated drivers or even a wrong connection. With the information in this article, you should be able to fix it and get it working again without help from anybody since the steps are self-explanatory.
Did you ever get this fixed? I am having the same issue right now with my Void USB RGB, I was updating the firmware on the headset and now it detects the USB Composite Device, but it fails to start, error code 10.
I have Windows 7 64 bit, i have confirmed all my drivers are good with updates and SFC for the windows native drivers, and I even did a system restore to last week, when it worked fine, but same thing. The crazy thing is that I can plug it into my wife's PC and it works fine. I have tried updating the firmware when plugged into hers and it updates successfully, on 0.17 now. I have uninstalled and reinstalled CUE completely, even nuking the corsair registry entries and the local and roaming appdata.
Upon plugging the UB400 adapter into my Windows 10 PC, it shows a "driver error" in bluetooth devices. And in device manager, it shows as "Generic Bluetooth Radio". There is no adapter recognized in device manager. I've tried searching for and updating the driver software, but it says it's the latest. My expectation is that this is plug and play and should not require the 400mb software download from TP-Link.
The Bluetooth driver error could occur when you connect a Bluetooth speaker, keyboard or mouse to your Windows 10 PC. The error is usually caused by outdated or incompatible drivers. It could be easily resolved by updating your drivers. Here are 5 ways to fix the Bluetooth driver error in Windows 10.
If the Bluetooth driver is outdated or not compatible with your Bluetooth device, the Bluetooth driver error could take place. To fix the Bluetooth driver error in Windows 10, you could use Device Manager to update your Bluetooth driver.
Sudden power fluctuations can damage system components, leading to errors, such as missing generic Bluetooth drivers. If this is the case, please use the System File Checker utility. This is the basic step of work:
In addition to the Bluetooth driver update, Driver Talent packs other features, such as drivers backup, drivers restore, drivers uninstall, system restore, drivers pre-download for another PC, PC Repair (no sound, no video, no Wi-Fi available, etc.), DLL files repair, hardware detection, VR support check and PC speed up, etc.
I recently picked up an nRF52840 dongle and I cannot seem to get it to work properly on a very new Win10 machine. It does seem to work properly on my Mac however so I believe the dongle physically works.
After plugging the device in to a USB port, I launch nRF Connect v3.3.1. There is a solid green LED on the dongle. (Yes, the first time I plugged it in it was flashing red at which time nRF Connect asked to program it. I said yes.)
Which firmware did you flash to the dongle? If the firmware does not include the USB DFU trigger library, you need to press the reset button to enter bootloader mode in order to program it again. See the Programming section in the documentation for more details.
As far as what firmware I flashed to the dongle, I really don't know. Whatever nRF connect decided it wanted to program into the device after I hit the reset button. It doesn't give me names or versions or anything.
I'm not able to see which firmware was flashed to the dongle, but if you flashed it using the Bluetooth Low Energy App in nRF Connect, it should be the connectivity firmware. Are you able to put the dongle in bootloader mode by pressing the reset button (the LED should "breathe" red)? Note that the reset button is on the side, and not the white button on top of the dongle.
As you requested, I uninstalled and reinstalled nRF Connect and I noticed a dialog came up that asked me if I wanted to install an USB CDC ACM driver. (I wish I would have taken a snapshot for the record). But anyway, I said yes and now my dongle is properly detected by my PC.
When I installed my ORCAD on a Windows 10 computer a while back, every time I run the Cadence License Server Configuration (when I swap USB dongle/license... because our company has a few), I always get this message at the very last step:
"Cadence License Server Configuration utility has detected that it needs to install the FLEXid 9 dongle driver on your system. Please make sure to connect your FLEXid USB dongle to an available USB port. The driver installation process may take a few minutes. Click OK to continue or Cancel to terminate the Cadence License Server Configuration utility"
I always click "OK" and it does its thing... long wait... and it gives the message below (which I always ignore because at the end the license/dongle still work as intended and the software is usable).
"- Unable to restart Cadence License Server with the new license file "..... ". Failed to install FLEXid dongle driver. Failed to update your CDS_LIC_FILE license path with the new license server setting "....".
Fast forward... June 2020, I installed the same software on a new computer I recently assembled running on the latest Windows 10 update. I went through the above License Server configuration process and when it got to the step where it says that the FLEXid 9 dongle driver needs to be installed, I clicked "OK" as usual. However this time after just a few seconds of clicking "OK", the system rebooted. This process is repeatable and the system will just reboot at this step on the process. The FLEXID information is blank on the System Settings at LMTOOLS which gives me the impression that the dongle is not installed and the information from it could not be retrieved.
After a series of long frustrating trial-and-error and numerous reboots, my computer finally gave up and showed Blue Screen of Death (BSOD). It referenced an error "PAGE_FAULT_IN_NONPAGED_AREA" related to the file "aksdf.sys". Now the more annoying thing is that my computer is now going to an endless loop of BSOD showing that issue. I did some Googling at it seems like the latest Windows 10 May 2020 update (version 2004) has some issues with this file.
Further Googling, this file is described as "The genuine aksdf.sys file is a software component of Aladdin HASP by Aladdin Knowledge Systems. Aladdin HASP (Hardware Against Software Piracy) a digital rights management (DRM) suite of protection and licensing software. Aksdf.sys is a filter driver that is necessary for the proper functioning of HASP. The component adds support for specialized external devices. Removing this file may cause problems with Aladdin hardware." It seems like Flexera is using this.
I think we have a central license server for our other Cadence softwares. However for ORCAD someone started getting a USB-dongle version and that's how everybody went afterwards. We ended up with several USB dongles, each maintained (or misplaced) by different people.
I am seeing suggestions of rolling out older versions of Windows 10 (prior to this update). Unfortunately the new PC has this latest version installed (after fresh installation) so there is no older version to rollback to. I have to find a way to get this older version somewhere.
I have the same issue after fresh setup of windows 10 incl latest updates (19042.685). Before v17.2 just worked fine but now after installing LMTool (v12.7..) my pc ends up with a blue screen immediately after start. Only safe mode booting and deinstalling LMTools stopped it. No idea how to fix that
I'm using a Kinivo BTD-300 Bluetooth 3.0 USB dongle so I can use my DualShock 3 controllers wirelessly. To do this, I had to replace the original driver for the device (the Bluetooth driver that come pre-installed with Windows 10) with an ScpServer driver using a program called Zadig.
It was working fine for a few weeks, but after I changed the port the controllers weren't connecting properly. So I replaced the drivers again. Then when I plugged it in I got the notification saying "USB Device Not Recognized (Code 43)" no matter which port I put it in. Once in a while it would show up in "Devices" with an error code 10 (driver error).I tried a System Restore from a few days ago, but now when I plug/unplug the dongle nothing happens. It doesn't show up in device manager and no notification pops up.
Also, the PC won't boot with it plugged in. It'll freeze at the "Press F2 to enter BIOS" screen, and won't resume until I unplug the dongle. Also, if I'm in the BIOS and I plug it in, it freezes up until i unplug it again. However, once booted into Windows I can unplug and plug it without freezing.How can I fix this? Any assistance is appreciated!
Apparently, there has been a change in Windows 8 related to signing of drivers. Win 8 now enforces that all drivers (related .inf files) have a digital signature. Without the signature, the driver will not be installed. On win 7, you could ignore the error and install anyway, but not so for Win 8. The driver (or really, the .inf file) for the dongle has not been certified by TI yet.
c80f0f1006