Error Building Sage

[Vishal Shahi]

Dear Sage Development Team,

I am experiencing an issue while building Sage on my MacBook Air M1 running macOS Sequoia. I followed all instructions outlined in the GitHub README, yet I continually receive an error during the build process, specifically when attempting to configure gsl-2.7.1.

Below is an excerpt of the terminal output:

[gsl-2.7.1] [spkg-install] checking for gcc... gcc

[gsl-2.7.1] [spkg-install] checking whether the C compiler works... no

[gsl-2.7.1] [spkg-install] configure: error: in `/Users/vishalshahi/Desktop/sage/sage/local/var/tmp/sage/build/gsl-2.7.1/src':

[gsl-2.7.1] [spkg-install] configure: error: C compiler cannot create executables

[gsl-2.7.1] [spkg-install] See `config.log' for more details

[gsl-2.7.1] [spkg-install] ********************************************************************************

I have verified that my system meets the prerequisites specified in the documentation and also tested if C works. Could you please provide guidance on how to resolve this issue or suggest additional troubleshooting steps? in log file it shows fails to make executables .

Thank you for your assistance.

Best regards,
Vishal Shahi

[Dima Pasechnik]

Do you use Homebrew?

Please post the top level config.log

[Dima Pasechnik]

Don't try to build Sage's Python (it's broken on macOS - but some devs
are in denial about it, and refuse to remove this usless, even
harmful, package from Sage).
Use a good, already installed, Python 3.11 or 3.12.
E.g. you can install python3.12 with homebrew:

brew install pyt...@3.12

make sure it's the default python3, or pass it explicitly to configure, as

./configure --with-system-python3=python3.12


PS. Why do you need "sudo" to run "less"?

It's not a good idea to build anything using "sudo", "sudo" is always
a security risk

On Sun, Mar 30, 2025 at 1:07 PM Vishal Shahi 4-Yr B.Tech.: Electronics
Engg., IIT(BHU) <vishal.sh...@iitbhu.ac.in> wrote:
>
> I did as you instructed but the build again failed as it failed to load ssl
> this is the last few lines of log file
>
>
> vishalshahi@Vishals-MacBook-Air-2 pkgs % sudo less /Users/vishalshahi/Desktop/sage/sage/logs/pkgs/python3-3.12.5.log
>
>
> Password:
>
>
> [spkg-build] Could not build the ssl module!
>
> [spkg-build] Python requires a OpenSSL 1.1.1 or newer
>
> [spkg-build]
>
> [spkg-build] Checked 111 modules (31 built-in, 75 shared, 2 n/a on macosx-15.3-arm64, 0 disabled, 3 missing, 0 failed on import)
>
> [spkg-build] Testing importing of various modules...
>
> [spkg-build] ctypes module imported OK
>
> [spkg-build] math module imported OK
>
> [spkg-build] hashlib module imported OK
>
> [spkg-build] <string>:1: DeprecationWarning: 'crypt' is deprecated and slated for removal in Python 3.13
>
> [spkg-build] crypt module imported OK
>
> [spkg-build] socket module imported OK
>
> [spkg-build] zlib module imported OK
>
> [spkg-build] sqlite3 module imported OK
>
> [spkg-build] Traceback (most recent call last):
>
> [spkg-build] File "<string>", line 1, in <module>
>
> [spkg-build] File "/Users/vishalshahi/Desktop/sage/sage/local/var/lib/sage/venv-python3.12.5/var/tmp/sage/build/python3-3.12.5/src/Lib/ssl.py", line 100, in <module>
>
> [spkg-build] import _ssl # if we can't import it, let the error propagate
>
> [spkg-build] ^^^^^^^^^^^
>
> [spkg-build] ModuleNotFoundError: No module named '_ssl'
>
> [spkg-build] ssl module failed to import
>
> [spkg-build] _scproxy module imported OK
>
> [spkg-build] Error: One or more modules failed to import.
>
> ************************************************************************
>
> Error building package python3-3.12.5
>
> ************************************************************************
>
> Please email sage-devel (http://groups.google.com/group/sage-devel)
>
> explaining the problem and including the log files
>
> /Users/vishalshahi/Desktop/sage/sage/logs/pkgs/python3-3.12.5.log
>
> and
>
> /Users/vishalshahi/Desktop/sage/sage/config.log
>
> Describe your computer, operating system, etc.
>
> If you want to try to fix the problem yourself, *don't* just cd to
>
> /Users/vishalshahi/Desktop/sage/sage/local/var/lib/sage/venv-python3.12.5/var/tmp/sage/build/python3-3.12.5 and type 'make' or whatever is appropriate.
>
> Instead, the following commands setup all environment variables
>
> correctly and load a subshell for you to debug the error:
>
> (cd '/Users/vishalshahi/Desktop/sage/sage/local/var/lib/sage/venv-python3.12.5/var/tmp/sage/build/python3-3.12.5' && '/Users/vishalshahi/Desktop/sage/sage/sage' --buildsh)
>
> When you are done debugging, you can type "exit" to leave the subshell.
>
> ************************************************************************
>
> real 2m19.398s user 1m25.244s sys 0m23.402s
>
> (END)
>
>
>
> On Sun, Mar 30, 2025 at 10:36 PM Dima Pasechnik <dim...@gmail.com> wrote:
>>
>> ---------- Forwarded message ---------
>> From: <dim...@gmail.com>
>> Date: Sun, Mar 30, 2025 at 11:54 AM
>> Subject: Re: [sage-devel] Error Building Sage
>> To: 'Vishal Shahi 4-Yr B.Tech.: Electronics Engg., IIT(BHU)' via
>> sage-devel <sage-...@googlegroups.com>
>>
>>
>> On Sun, Mar 30, 2025 at 10:39:53AM +0530, 'Vishal Shahi 4-Yr B.Tech.:
>> Electronics Engg., IIT(BHU)' via sage-devel wrote:
>> > Even after installing gsl from brew it still shows that gsl will be
>> > installed as no system package detected what to do ?
>>
>> it's detected all right, but it depends on openblas, which is already
>> installed (and mixing 2 openblas installs is bad). Your log says:
>>
>> openblas: SPKG version 0.3.28 is already installed
>>
>> So, as your log says:
>>
>> Checking whether SageMath should install SPKG gsl...
>> checking whether any of openblas is installed as or will be installed as
>> SPKG... yes; install gsl as well
>>
>> Please run
>>
>> make distclean
>>
>> and then re-run
>>
>> ./configure
>>
>> This should result in using both system-wide openblas and gsl.
>>
>>
>>
>> > vishalshahi@Vishals-MacBook-Air-2 sage % brew reinstall gsl && source
>> > /Users/vishalshahi/Desktop/sage/sage/.homebrew-build-env
>> > ==> Downloading https://ghcr.io/v2/homebrew/core/gsl/manifests/2.8
>> > Already downloaded:
>> > /Users/vishalshahi/Library/Caches/Homebrew/downloads/fd4485cda398f5fdecc616106f261ea2cd84987bc3f02422a1ae0fc0b5c6451a--gsl-2.8.bottle_manifest.json
>> > ==> Fetching gsl
>> > ==> Downloading
>> > https://ghcr.io/v2/homebrew/core/gsl/blobs/sha256:52e3fe781b19bd2d88986005309b2d81a2af60d17a8b3dbc3d5cad4ae2c
>> > Already downloaded:
>> > /Users/vishalshahi/Library/Caches/Homebrew/downloads/4dbb9c0506a701ad627c5cab95e17f2124ee45d5dce44b752dad124e25ad85cf--gsl--2.8.arm64_sequoia.bottle.tar.gz
>> > ==> Reinstalling gsl
>> > ==> Pouring gsl--2.8.arm64_sequoia.bottle.tar.gz
>> > 🍺 /opt/homebrew/Cellar/gsl/2.8: 292 files, 10.2MB
>> > ==> Running `brew cleanup gsl`...
>> > Disable this behaviour by setting HOMEBREW_NO_INSTALL_CLEANUP.
>> > Hide these hints with HOMEBREW_NO_ENV_HINTS (see `man brew`).
>> > AFTER THIS I RAN make reconfigure
>> >
>> > Checking whether SageMath should install SPKG distlib...
>> > configure: SPKG distlib is not required on this system
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG libatomic_ops...
>> > checking for atomic_ops >= 7.6.2... yes
>> > configure: will use system package and not install SPKG libatomic_ops
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG gc...
>> > checking whether any of libatomic_ops is installed as or will be installed
>> > as SPKG... no
>> > checking whether we run on WSL... no
>> > checking for bdw-gc-threaded >= 7.6.4... no
>> > checking for bdw-gc >= 7.6.4... yes
>> > configure: will use system package and not install SPKG gc
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG ecl...
>> > checking whether any of gcc gc gmp is installed as or will be installed as
>> > SPKG... no
>> > checking for ecl-config... /opt/homebrew/bin/ecl-config
>> > configure: will use system package and not install SPKG ecl
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG ntl...
>> > checking whether any of gmp gcc is installed as or will be installed as
>> > SPKG... no
>> > checking for NTL/ZZ.h... yes
>> > checking whether we can link a program using NTL... yes
>> > checking NTL version >= 10.3... yes
>> > configure: will use system package and not install SPKG ntl
>> > checking absolute name of <NTL/ZZ.h>... checking for NTL/ZZ.h... (cached)
>> > yes
>> > ///opt/homebrew/opt/ntl/include/NTL/ZZ.h
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG ncurses...
>> > checking for ncurses >= 6.0... yes
>> > configure: will use system package and not install SPKG ncurses
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG readline...
>> > checking Installing ncurses? ... No.
>> > checking for readline >= 6.0... yes
>> > configure: will use system package and not install SPKG readline
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG pari...
>> > configure: pari has already been installed by SageMath
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG mpfr...
>> > checking whether any of gmp is installed as or will be installed as SPKG...
>> > no
>> > checking for mpfr.h... yes
>> > checking for library containing mpfr_cmpabs_ui... -lmpfr
>> > configure: will use system package and not install SPKG mpfr
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG flint...
>> > configure: flint has already been installed by SageMath
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG eclib...
>> > configure: eclib has already been installed by SageMath
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG ecm...
>> > configure: ecm has already been installed by SageMath
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG givaro...
>> > configure: givaro has already been installed by SageMath
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG fflas_ffpack...
>> > checking whether any of givaro gmp openblas is installed as or will be
>> > installed as SPKG... yes; install fflas_ffpack as well
>> > configure: no suitable system package found for SPKG fflas_ffpack
>> > checking whether C++ compiler accepts -mavx512f -mavx512vl -mavx512dq... yes
>> > checking whether C++ compiler accepts -mfma... yes
>> > checking whether C++ compiler accepts -mfma4... yes
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG ffmpeg...
>> > checking for ffmpeg... /opt/homebrew/bin/ffmpeg
>> > configure: will use system package and not install SPKG ffmpeg
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG filelock...
>> > configure: SPKG filelock is not required on this system
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG fplll...
>> > checking whether any of gcc mpfr is installed as or will be installed as
>> > SPKG... no
>> > checking for fplll >= 5.4.5 fplll <= 5.4.5... no
>> > configure: no suitable system package found for SPKG fplll
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG free_fonts...
>> > checking for FreeSerif.ttf... no
>> > checking for FreeSerif.otf... no
>> > configure: no suitable system package found for SPKG free_fonts
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG freetype...
>> > checking whether any of gcc libpng is installed as or will be installed as
>> > SPKG... no
>> > checking for freetype2 >= 20.0... yes
>> > configure: will use system package and not install SPKG freetype
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG fricas...
>> > checking for FriCAS >= 1.3.8...
>> > configure: no suitable system package found for SPKG fricas
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG gap...
>> > configure: gap has already been installed by SageMath
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG gengetopt...
>> > checking for gengetopt... /opt/homebrew/bin/gengetopt
>> > configure: will use system package and not install SPKG gengetopt
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG gf2x...
>> > checking for gf2x >= 1.2... no
>> > checking for gf2x.h... no
>> > checking for library containing gf2x_mul_r... no
>> > configure: no suitable system package found for SPKG gf2x
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG gfan...
>> > checking for gfan >= 0.6.2...
>> > configure: no suitable system package found for SPKG gfan
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG giac...
>> > checking whether any of pari is installed as or will be installed as
>> > SPKG... yes; install giac as well
>> > configure: no suitable system package found for SPKG giac
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG git...
>> > checking for git... /opt/homebrew/bin/git
>> > configure: will use system package and not install SPKG git
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG gp2c...
>> > checking whether any of pari is installed as or will be installed as
>> > SPKG... yes; install gp2c as well
>> > configure: pari.cfg is $SAGE_LOCAL/lib/pari/pari.cfg
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG graphviz...
>> > checking for dot... dot
>> > checking for neato... neato
>> > checking for twopi... twopi
>> > configure: will use system package and not install SPKG graphviz
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG gsl...
>> > checking whether any of openblas is installed as or will be installed as
>> > SPKG... yes; install gsl as well
>> > configure: no suitable system package found for SPKG gsl
>> > checking 32-bit host C ABI... no
>> > checking for egrep -e... /usr/bin/grep -E
>> > checking for ELF binary format... no
>> > checking for the common suffixes of directories in the library search
>> > path... lib,lib,lib
>> > checking for iconv... yes
>> > checking for working iconv... yes
>> > checking how to link with libiconv... -liconv
>> > checking whether iconv is compatible with its POSIX signature... yes
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG iconv...
>> > configure: will use system package and not install SPKG iconv
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG igraph...
>> > checking whether any of glpk openblas gmp is installed as or will be
>> > installed as SPKG... yes; install igraph as well
>> > configure: no suitable system package found for SPKG igraph
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG imagemagick...
>> > checking for convert... /opt/homebrew/bin/convert
>> > configure: will use system package and not install SPKG imagemagick
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG iml...
>> > checking whether any of gmp openblas is installed as or will be installed
>> > as SPKG... yes; install iml as well
>> > configure: no suitable system package found for SPKG iml
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG info...
>> > checking for info... /opt/homebrew/opt/texinfo/bin/info
>> > checking for texi2any... /opt/homebrew/opt/texinfo/bin/texi2any
>> > configure: will use system package and not install SPKG info
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG isl...
>> > checking whether any of gmp is installed as or will be installed as SPKG...
>> > no
>> > checking for isl >= 0.20... yes
>> > configure: will use system package and not install SPKG isl
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG lcalc...
>> > checking whether any of pari is installed as or will be installed as
>> > SPKG... yes; install lcalc as well
>> > configure: no suitable system package found for SPKG lcalc
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG libbraiding...
>> > checking if we can link against libbraiding... no
>> > configure: no suitable system package found for SPKG libbraiding
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG libffi...
>> > checking for libffi... yes
>> > configure: will use system package and not install SPKG libffi
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG libgd...
>> > checking whether any of gcc libpng freetype is installed as or will be
>> > installed as SPKG... no
>> > checking for gdlib >= 2.1... yes
>> > configure: will use system package and not install SPKG libgd
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG libgraphviz...
>> > checking for graphviz/cgraph.h... yes
>> > configure: will use system package and not install SPKG libgraphviz
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG libhomfly...
>> > checking whether any of gc is installed as or will be installed as SPKG...
>> > no
>> > checking for homfly.h... no
>> > configure: no suitable system package found for SPKG libhomfly
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG libjpeg...
>> > checking for libjpeg... yes
>> > configure: will use system package and not install SPKG libjpeg
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG xz...
>> > configure: SPKG xz is not required on this system
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG liblzma...
>> > checking whether any of xz is installed as or will be installed as SPKG...
>> > no
>> > checking for lzma_raw_decoder in -llzma... yes
>> > checking for lzma.h... yes
>> > configure: will use system package and not install SPKG liblzma
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG nauty...
>> > checking for geng... /opt/homebrew/bin/geng
>> > checking for directg... /opt/homebrew/bin/directg
>> > checking for gentourng... /opt/homebrew/bin/gentourng
>> > checking for geng... /opt/homebrew/bin/geng
>> > checking for genbg... /opt/homebrew/bin/genbg
>> > checking for gentreeg... /opt/homebrew/bin/gentreeg
>> > checking for genktreeg... /opt/homebrew/bin/genktreeg
>> > checking for genposetg... /opt/homebrew/bin/genposetg
>> > configure: will use system package and not install SPKG nauty
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG libnauty...
>> > checking whether any of nauty is installed as or will be installed as
>> > SPKG... no
>> > checking for nauty/nauty.h... yes
>> > checking for library containing densenauty... -lnauty
>> > configure: will use system package and not install SPKG libnauty
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG libsemigroups...
>> > checking for libsemigroups >= 0.6.7... no
>> > configure: no suitable system package found for SPKG libsemigroups
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG libxml2...
>> > checking for xml2-config... /usr/bin/xml2-config
>> > configure: will use system package and not install SPKG libxml2
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG m4rie...
>> > checking whether any of m4ri is installed as or will be installed as
>> > SPKG... yes; install m4rie as well
>> > configure: no suitable system package found for SPKG m4rie
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG linbox...
>> > checking whether any of fflas_ffpack flint fplll givaro gmp iml m4ri m4rie
>> > mpfr ntl is installed as or will be installed as SPKG... yes; install
>> > linbox as well
>> > configure: no suitable system package found for SPKG linbox
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG llvm...
>> > configure: will use system package and not install SPKG llvm
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG lrcalc...
>> > checking for lrcalc/schublib.h... no
>> > checking for lrcalc/lrcoef.h... no
>> > configure: no suitable system package found for SPKG lrcalc
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG lrslib...
>> > checking whether any of gmp flint is installed as or will be installed as
>> > SPKG... yes; install lrslib as well
>> > configure: no suitable system package found for SPKG lrslib
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG mathjax...
>> > checking for MathJax-3.x... no
>> > configure: no suitable system package found for SPKG mathjax
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG maxima...
>> > checking whether any of ecl is installed as or will be installed as SPKG...
>> > no
>> > checking for Maxima >= $5.45.0... /opt/homebrew/bin/maxima
>> > checking if ECL can "require" the maxima module... no
>> > configure: no suitable system package found for SPKG maxima
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG meson...
>> > checking for meson >= 1.2.3... /opt/homebrew/bin/meson
>> > configure: will use system package and not install SPKG meson
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG mpc...
>> > checking whether any of mpfr is installed as or will be installed as
>> > SPKG... no
>> > checking for MPC >= 1.2.1... yes
>> > checking for library containing mpc_sum... -lmpc
>> > configure: will use system package and not install SPKG mpc
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG mpfi...
>> > checking whether any of mpfr is installed as or will be installed as
>> > SPKG... no
>> > checking for mpfi.h... yes
>> > checking for library containing mpfi_diam_abs... -lmpfi
>> > checking MPFI version >= 1.5... yes
>> > configure: will use system package and not install SPKG mpfi
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG msolve...
>> > checking for msolve >= 0.6.5... no
>> > checking for msolve... could not find working msolve
>> >
>> > configure: no suitable system package found for SPKG msolve
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG ninja_build...
>> > checking for ninja >= 1.8.2... /opt/homebrew/bin/ninja
>> > configure: will use system package and not install SPKG ninja_build
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG onetbb...
>> > checking whether oneTBB >= 2018 is available... yes
>> > configure: will use system package and not install SPKG onetbb
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG python3...
>> > checking whether any of bzip2 liblzma libffi zlib is installed as or will
>> > be installed as SPKG... no
>> > checking for python3 >= 3.9.0, < 3.13.0 with modules sqlite3, ctypes, math,
>> > hashlib, socket, zlib, ssl, ensurepip and setuptools/distutils...
>> > checking ... whether /opt/homebrew/bin/python3 is good... no, Python 3.13.2
>> > is too recent
>> > checking ... whether
>> > /Library/Frameworks/Python.framework/Versions/3.12/bin/python3 is good...
>> > no, the version is in the supported range but cannot import one of the
>> > required modules: sqlite3, ctypes, math, hashlib, socket, zlib, ssl,
>> > ensurepip, setuptools, setuptools.extension
>> > checking ... whether /usr/local/bin/python3 is good... no, the version is
>> > in the supported range but cannot import one of the required modules:
>> > sqlite3, ctypes, math, hashlib, socket, zlib, ssl, ensurepip, setuptools,
>> > setuptools.extension
>> > checking ... whether /usr/bin/python3 is good... yes
>> > checking for python3 >= 3.9.0, < 3.13.0 with modules sqlite3, ctypes, math,
>> > hashlib, socket, zlib, ssl, ensurepip... /usr/bin/python3
>> > configure: will use system package and not install SPKG python3
>> > checking whether /usr/bin/python3 is configured to build multiarch
>> > extensions... yes; disabling it by setting ARCHFLAGS
>> > checking whether "-march=native" works with the C/C++ compilers configured
>> > for building extensions for /usr/bin/python3... yes
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG openssl...
>> > configure: SPKG openssl is not required on this system
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG palp...
>> > checking for poly.x... no
>> > checking for poly-4d.x... no
>> > checking for poly-5d.x... no
>> > checking for poly-6d.x... no
>> > checking for poly-11d.x... no
>> > checking for class.x... no
>> > checking for class-4d.x... no
>> > checking for class-5d.x... no
>> > checking for class-6d.x... no
>> > checking for class-11d.x... no
>> > checking for nef.x... no
>> > checking for nef-4d.x... no
>> > checking for nef-5d.x... no
>> > checking for nef-6d.x... no
>> > checking for nef-11d.x... no
>> > checking for cws.x... no
>> > checking for cws-4d.x... no
>> > checking for cws-5d.x... no
>> > checking for cws-6d.x... no
>> > checking for cws-11d.x... no
>> > configure: no suitable system package found for SPKG palp
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG pandoc...
>> > checking for pandoc... /opt/homebrew/bin/pandoc
>> > configure: will use system package and not install SPKG pandoc
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG pari_elldata...
>> > checking installing pari? ... yes; install pari_elldata as well
>> > configure: no suitable system package found for SPKG pari_elldata
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG pari_galdata...
>> > configure: pari_galdata has already been installed by SageMath
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG pari_galpol...
>> > checking installing pari? ... yes; install pari_galpol as well
>> > configure: no suitable system package found for SPKG pari_galpol
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG pari_nftables...
>> > checking installing pari? ... yes; install pari_nftables as well
>> > configure: no suitable system package found for SPKG pari_nftables
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG pari_seadata...
>> > checking installing pari? ... yes; install pari_seadata as well
>> > configure: no suitable system package found for SPKG pari_seadata
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG pari_seadata_small...
>> > configure: pari_seadata_small has already been installed by SageMath
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG patch...
>> > configure: patch has already been installed by SageMath
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG patchelf...
>> > checking for patchelf... /opt/homebrew/bin/patchelf
>> > configure: will use system package and not install SPKG patchelf
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG pdf2svg...
>> > checking for pdf2svg... /opt/homebrew/bin/pdf2svg
>> > configure: will use system package and not install SPKG pdf2svg
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG perl_cpan_polymake_prereq...
>> > checking for perl module XML::Writer... no
>> > checking for perl module XML::LibXML... no
>> > checking for perl module XML::LibXSLT... no
>> > checking for perl module File::Slurp... no
>> > checking for perl module JSON... no
>> > checking for perl module SVG... no
>> > checking for perl module Term::ReadKey... no
>> > configure: no suitable system package found for SPKG
>> > perl_cpan_polymake_prereq
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG perl_mongodb...
>> > checking for perl module MongoDB... no
>> > configure: no suitable system package found for SPKG perl_mongodb
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG perl_term_readline_gnu...
>> > checking for perl module Term::ReadLine... ok
>> > checking Term::ReadLine module...... non-GNU
>> > configure: no suitable system package found for SPKG perl_term_readline_gnu
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG pkgconf...
>> > configure: will use system package and not install SPKG pkgconf
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG planarity...
>> > checking for planarity/planarity.h... no
>> > configure: no suitable system package found for SPKG planarity
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG polymake...
>> > checking for polymake-config >= 3.5... /opt/homebrew/bin/polymake-config
>> > checking whether libpolymake works... no
>> > configure: no suitable system package found for SPKG polymake
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG ppl...
>> > checking whether any of gcc glpk gmp is installed as or will be installed
>> > as SPKG... no
>> > checking for ppl-config... /opt/homebrew/bin/ppl-config
>> > checking for the Parma Polyhedra Library, version >= 1.2... yes
>> > configure: will use system package and not install SPKG ppl
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG primesieve...
>> > checking for primesieve >= 8.0... yes
>> > configure: will use system package and not install SPKG primesieve
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG primecount...
>> > checking whether any of primesieve is installed as or will be installed as
>> > SPKG... no
>> > checking for primecount >= 7.1... yes
>> > configure: will use system package and not install SPKG primecount
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG qhull...
>> > checking for qhull... /opt/homebrew/bin/qhull
>> > checking whether qhull's version is good enough... yes
>> > checking for libqhull_r/libqhull_r.h... yes
>> > checking for library containing qh_distplane... -lqhull_r
>> > configure: will use system package and not install SPKG qhull
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG rw...
>> > checking for rw.h... no
>> > checking for library containing calculate_level... no
>> > configure: no suitable system package found for SPKG rw
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG sbcl...
>> > checking for sbcl >= 1.4.16... /opt/homebrew/bin/sbcl
>> > configure: will use system package and not install SPKG sbcl
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG singular...
>> > checking whether any of gmp ntl flint readline mpfr cddlib is installed as
>> > or will be installed as SPKG... yes; install singular as well
>> > configure: no suitable system package found for SPKG singular
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG sqlite...
>> > configure: SPKG sqlite is not required on this system
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG suitesparse...
>> > checking whether any of openblas is installed as or will be installed as
>> > SPKG... yes; install suitesparse as well
>> > configure: no suitable system package found for SPKG suitesparse
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG symengine...
>> > checking whether any of gmp ecm flint mpc mpfr is installed as or will be
>> > installed as SPKG... yes; install symengine as well
>> > configure: no suitable system package found for SPKG symengine
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG symmetrica...
>> > checking for symmetrica/def.h... no
>> > configure: no suitable system package found for SPKG symmetrica
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG sympow...
>> > checking for sympow... no
>> > configure: no suitable system package found for SPKG sympow
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG tachyon...
>> > checking for tachyon... no
>> > configure: tachyon not found. Installing tachyon
>> > configure: no suitable system package found for SPKG tachyon
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG texlive...
>> > checking for pdflatex... no
>> > checking for latexmk... no
>> > checking for dvipng... no
>> > checking for latex package fontspec... no
>> > checking for latex package xunicode... no
>> > checking for latex package xltxtra... no
>> > checking for latex package amssymb... no
>> > checking for latex package amsfonts... no
>> > checking for latex package graphicx... no
>> > checking for latex package mathrsfs... no
>> > checking for latex package textcomp... no
>> > checking for latex package tikz... no
>> > checking for latex package tikz-qtree... no
>> > checking for latex package iftex... no
>> > checking for latex package tkz-berge... no
>> > checking for latex package tkz-graph... no
>> > checking for latex package xy... no
>> > checking for latex package babel... no
>> > checking for latex package subfigure... no
>> > checking for latex package hyperref... no
>> > checking for latex package hypcap... no
>> > checking for latex package xr... no
>> > checking for latex package tgtermes... no
>> > checking for latex package fncychap... no
>> > configure: no suitable system package found for SPKG texlive
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG texlive_luatex...
>> > checking for luaotfload-main.lua... no
>> > configure: no suitable system package found for SPKG texlive_luatex
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG xindy...
>> > checking for xindy... no
>> > configure: no suitable system package found for SPKG xindy
>> > -----------------------------------------------------------------------------
>> > Checking whether SageMath should install SPKG zeromq...
>> > checking whether any of gcc is installed as or will be installed as SPKG...
>> > no
>> > checking for zmq.h... yes
>> > checking for ZMQ version >= 4.2.5... yes
>> > configure: will use system package and not install SPKG zeromq
>> > ## -----------------------------------------------------------------------
>> > ##
>> > ## Build status for each package:
>> > ##
>> > ## -----------------------------------------------------------------------
>> > ##
>> > 4ti2: no suitable system package; optional, use
>> > "./configure --enable-4ti2" to install SPKG version 1.6.10
>> > admcycles: no; optional pip package; use "./sage -i
>> > admcycles" to install
>> > alabaster: no; standard, SPKG version 0.7.16 will be
>> > installed
>> > anyio: no; standard, SPKG version 4.4.0 will be
>> > installed
>> > appdirs: not required on your platform; SPKG will
>> > not be installed
>> > appnope: no; standard, SPKG version 0.1.4 will be
>> > installed
>> > argon2_cffi: no; standard, SPKG version 21.3.0 will be
>> > installed
>> > argon2_cffi_bindings: no; standard, SPKG version 21.2.0 will be
>> > installed
>> > arrow: no; standard, SPKG version 1.3.0 will be
>> > installed
>> > asttokens: no; standard, SPKG version 2.4.1 will be
>> > installed
>> > async_lru: no; standard, SPKG version 2.0.4 will be
>> > installed
>> > attrs: no; standard, SPKG version 23.2.0 will be
>> > installed
>> > auditwheel_or_delocate: no; optional pip package; use "./sage -i
>> > auditwheel_or_delocate" to install
>> > awali: experimental, use "./configure
>> > --enable-awali" to install SPKG version 1.0.2-190218
>> > babel: no; standard, SPKG version 2.14.0 will be
>> > installed
>> > barvinok: experimental, use "./configure
>> > --enable-barvinok" to install SPKG version 0.41.7
>> > beautifulsoup4: no; standard, SPKG version 4.12.2 will be
>> > installed
>> > beniget: no; standard, SPKG version 0.4.1 will be
>> > installed
>> > benzene: optional, use "./configure
>> > --enable-benzene" to install SPKG version 20130630
>> > biopython: no; optional pip package; use "./sage -i
>> > biopython" to install
>> > bleach: no; standard, SPKG version 6.1.0 will be
>> > installed
>> > bliss: no suitable system package; optional, use
>> > "./configure --enable-bliss" to install SPKG version 0.77
>> > boost_cropped: using system package; SPKG will not be
>> > installed
>> > brial: SPKG version 1.2.8 is already installed
>> > buckygen: optional, use "./configure
>> > --enable-buckygen" to install SPKG version 1.1
>> > bzip2: using system package; SPKG will not be
>> > installed
>> > cachetools: not required on your platform; SPKG will
>> > not be installed
>> > calver: no; standard, SPKG version 2022.6.26 will
>> > be installed
>> > cbc: no suitable system package; optional, use
>> > "./configure --enable-cbc" to install SPKG version 2.9.4.p0
>> > ccache: optional, use "./configure --enable-ccache"
>> > to install SPKG version 3.3.4
>> > cddlib: using system package; SPKG will not be
>> > installed
>> > certifi: no; standard, SPKG version 2024.2.2 will be
>> > installed
>> > cffi: no; standard, SPKG version 1.15.1 will be
>> > installed
>> > chardet: not required on your platform; SPKG will
>> > not be installed
>> > charset_normalizer: no; standard, SPKG version 3.3.2 will be
>> > installed
>> > clarabel: optional pip package; use "./sage -i
>> > clarabel" to install
>> > cliquer: SPKG version 1.22 is already installed
>> > cmake: using system package; SPKG will not be
>> > installed
>> > cocoalib: experimental, use "./configure
>> > --enable-cocoalib" to install SPKG version 0.99564
>> > colorama: not required on your platform; SPKG will
>> > not be installed
>> > combinatorial_designs: standard, SPKG version 20140630.p0 is
>> > already installed
>> > comm: no; standard, SPKG version 0.1.4 will be
>> > installed
>> > configure: base, use "./configure --enable-configure"
>> > to install SPKG version f6ad0ecf1f4a269f5954d5487336b13f70624594
>> > contourpy: no; standard, SPKG version 1.1.1 will be
>> > installed
>> > conway_polynomials: no; standard, SPKG version 0.10 will be
>> > installed
>> > coxeter3: no suitable system package; optional, use
>> > "./configure --enable-coxeter3" to install SPKG version
>> > 8ac9c71723c8ca57a836d6381aed125261e44e9e.p0
>> > cppy: no; standard, SPKG version 1.2.1 will be
>> > installed
>> > csdp: optional, use "./configure --enable-csdp"
>> > to install SPKG version 6.2.p1
>> > cunningham_tables: optional, use "./configure
>> > --enable-cunningham_tables" to install SPKG version 1.0
>> > curl: using system package; SPKG will not be
>> > installed
>> > cvxopt: no suitable system package; standard, SPKG
>> > version 1.3.2 will be installed
>> > cvxpy: no; optional, use "./configure
>> > --enable-cvxpy" to install SPKG version 1.4.1
>> > cycler: no; standard, SPKG version 0.11.0 will be
>> > installed
>> > cylp: no; optional, use "./configure
>> > --enable-cylp" to install SPKG version 0.92.2
>> > cypari: no suitable system package; standard, SPKG
>> > version 2.2.0 will be installed
>> > cysignals: no; standard, SPKG version 1.11.4 will be
>> > installed
>> > cython: no; standard, SPKG version 3.0.11 will be
>> > installed
>> > d3js: optional, use "./configure --enable-d3js"
>> > to install SPKG version 3.4.8
>> > database_cremona_ellcurve: optional, use "./configure
>> > --enable-database_cremona_ellcurve" to install SPKG version 20190911
>> > database_cubic_hecke: no; optional, use "./configure
>> > --enable-database_cubic_hecke" to install SPKG version 2022.4.4
>> > database_jones_numfield: optional, use "./configure
>> > --enable-database_jones_numfield" to install SPKG version 4
>> > database_knotinfo: no; optional, use "./configure
>> > --enable-database_knotinfo" to install SPKG version 2024.10.1
>> > database_kohel: optional, use "./configure
>> > --enable-database_kohel" to install SPKG version 20160724
>> > database_mutation_class: optional, use "./configure
>> > --enable-database_mutation_class" to install SPKG version 1.0
>> > database_odlyzko_zeta: optional, use "./configure
>> > --enable-database_odlyzko_zeta" to install SPKG version 20061209
>> > database_stein_watkins: optional, use "./configure
>> > --enable-database_stein_watkins" to install SPKG version 20110713
>> > database_stein_watkins_mini: optional, use "./configure
>> > --enable-database_stein_watkins_mini" to install SPKG version 20070827
>> > database_symbolic_data: optional, use "./configure
>> > --enable-database_symbolic_data" to install SPKG version 20070206
>> > dateutil: no; standard, SPKG version 2.9.0.post0 will
>> > be installed
>> > debugpy: no; standard, SPKG version 1.8.1 will be
>> > installed
>> > decorator: no; standard, SPKG version 5.1.1 will be
>> > installed
>> > deformation: experimental, use "./configure
>> > --enable-deformation" to install SPKG version 20210503
>> > defusedxml: no; standard, SPKG version 0.7.1 will be
>> > installed
>> > distlib: not required on your platform; SPKG will
>> > not be installed
>> > docutils: no; standard, SPKG version 0.21.2 will be
>> > installed
>> > dot2tex: no; optional, use "./configure
>> > --enable-dot2tex" to install SPKG version 2.11.3.p0
>> > dsdp: optional, use "./configure --enable-dsdp"
>> > to install SPKG version 5.8
>> > e_antic: optional, use "./configure
>> > --enable-e_antic" to install SPKG version 2.0.2
>> > ecl: using system package; SPKG will not be
>> > installed
>> > eclib: SPKG version 20231212 is already installed
>> > ecm: SPKG version 7.0.6 is already installed
>> > ecos_python: no; optional, use "./configure
>> > --enable-ecos_python" to install SPKG version 2.0.12
>> > editables: no; standard, SPKG version 0.5 will be
>> > installed
>> > elliptic_curves: standard, SPKG version 0.8.1 will be
>> > installed
>> > entrypoints: no; standard, SPKG version 0.4 will be
>> > installed
>> > exceptiongroup: no; standard, SPKG version 1.2.2 will be
>> > installed
>> > execnet: standard, SPKG version 2.1.1 will be
>> > installed
>> > executing: no; standard, SPKG version 2.0.1 will be
>> > installed
>> > fastjsonschema: no; standard, SPKG version 2.18.0 will be
>> > installed
>> > fflas_ffpack: no suitable system package; standard, SPKG
>> > version 2.5.0+sage-2024-05-18b will be installed
>> > ffmpeg: using system package
>> > filelock: not required on your platform; SPKG will
>> > not be installed
>> > flint: SPKG version 3.1.3 is already installed
>> > flit_core: no; standard, SPKG version 3.9.0 will be
>> > installed
>> > fonttools: no; standard, SPKG version 4.42.1 will be
>> > installed
>> > fplll: no suitable system package; standard, SPKG
>> > version 5.4.5 will be installed
>> > fpylll: no suitable system package; standard, SPKG
>> > version 0.6.1 will be installed
>> > fqdn: no; standard, SPKG version 1.5.1 will be
>> > installed
>> > free_fonts: no suitable system package; optional
>> > freetype: using system package; SPKG will not be
>> > installed
>> > fricas: no suitable system package; optional, use
>> > "./configure --enable-fricas" to install SPKG version 1.3.11
>> > frobby: optional, use "./configure --enable-frobby"
>> > to install SPKG version 0.9.0.p2
>> > furo: no; standard, SPKG version 2024.7.18 will
>> > be installed
>> > gap: SPKG version 4.13.1 is already installed
>> > gap3: experimental, use "./configure
>> > --enable-gap3" to install SPKG version 04jul17
>> > gap_jupyter: no; optional, use "./configure
>> > --enable-gap_jupyter" to install SPKG version 0.9
>> > gap_packages: optional, use "./configure
>> > --enable-gap_packages" to install SPKG version 4.13.1
>> > gast: no; standard, SPKG version 0.5.4 will be
>> > installed
>> > gc: using system package; SPKG will not be
>> > installed
>> > gcc: using system package; SPKG will not be
>> > installed
>> > gdb: optional
>> > gengetopt: using system package; SPKG will not be
>> > installed
>> > gf2x: no suitable system package; standard, SPKG
>> > version 1.3.0 will be installed
>> > gfan: no suitable system package; standard, SPKG
>> > version 0.6.2.p1 will be installed
>> > gfortran: using system package; SPKG will not be
>> > installed
>> > giac: no suitable system package; standard, SPKG
>> > version 1.9.0.15p0 will be installed
>> > git: using system package
>> > github_cli: optional
>> > gitpython: no; optional pip package; use "./sage -i
>> > gitpython" to install
>> > givaro: SPKG version 4.2.0 is already installed
>> > glpk: using system package; SPKG will not be
>> > installed
>> > glucose: optional, use "./configure
>> > --enable-glucose" to install SPKG version 4.1
>> > gmp: using system package; SPKG will not be
>> > installed
>> > gmpy2: no; standard, SPKG version 2.2.0a1 will be
>> > installed
>> > gnulib: standard, SPKG version
>> > f9b39c4e337f1dc0dd07c4f3985c476fb875d799 will be installed
>> > gnumake_tokenpool: standard, SPKG version 0.0.7 will be
>> > installed
>> > gp2c: no suitable system package; optional, use
>> > "./configure --enable-gp2c" to install SPKG version 0.0.10.p0
>> > graphs: standard, SPKG version 20210214.p0 will be
>> > installed
>> > graphviz: using system package
>> > gsl: no suitable system package; standard, SPKG
>> > version 2.7.1 will be installed
>> > h11: standard, SPKG version 0.14.0 will be
>> > installed
>> > hatchling: no; standard, SPKG version 1.25.0 will be
>> > installed
>> > httpcore: no; standard, SPKG version 1.0.5 will be
>> > installed
>> > httpx: no; standard, SPKG version 0.27.0 will be
>> > installed
>> > hypothesis: optional pip package; use "./sage -i
>> > hypothesis" to install
>> > iconv: using system package
>> > idna: no; standard, SPKG version 3.7 will be
>> > installed
>> > igraph: no suitable system package; optional, use
>> > "./configure --enable-igraph" to install SPKG version 0.10.12
>> > imagemagick: using system package
>> > imagesize: no; standard, SPKG version 1.4.1 will be
>> > installed
>> > iml: no suitable system package; standard, SPKG
>> > version 1.0.4p2.p2 will be installed
>> > importlib_metadata: no; standard, SPKG version 7.0.1 will be
>> > installed
>> > importlib_resources: no; standard, SPKG version 6.1.1 will be
>> > installed
>> > info: using system package; SPKG will not be
>> > installed
>> > iniconfig: standard, SPKG version 2.0.0 will be
>> > installed
>> > ipykernel: no; standard, SPKG version 6.27.1 will be
>> > installed
>> > ipympl: no; standard, SPKG version 0.9.3 will be
>> > installed
>> > ipython: no; standard, SPKG version 8.18.1 will be
>> > installed
>> > ipython_genutils: no; standard, SPKG version 0.2.0 will be
>> > installed
>> > ipywidgets: no; standard, SPKG version 8.1.1 will be
>> > installed
>> > isl: using system package; SPKG will not be
>> > installed
>> > isoduration: no; standard, SPKG version 20.11.0 will be
>> > installed
>> > jedi: no; standard, SPKG version 0.19.1 will be
>> > installed
>> > jinja2: no; standard, SPKG version 3.1.4 will be
>> > installed
>> > jmol: optional, use "./configure --enable-jmol"
>> > to install SPKG version 14.29.52
>> > json5: no; standard, SPKG version 0.9.14 will be
>> > installed
>> > jsonpointer: no; standard, SPKG version 2.4 will be
>> > installed
>> > jsonschema: no; standard, SPKG version 4.17.3 will be
>> > installed
>> > jsonschema_specifications: no; standard, SPKG version 2023.3.3 will be
>> > installed
>> > jupymake: no; optional, use "./configure
>> > --enable-jupymake" to install SPKG version 0.9
>> > jupyter_client: no; standard, SPKG version 8.3.1 will be
>> > installed
>> > jupyter_core: no; standard, SPKG version 5.3.2 will be
>> > installed
>> > jupyter_events: no; standard, SPKG version 0.6.3 will be
>> > installed
>> > jupyter_jsmol: no; optional, use "./configure
>> > --enable-jupyter_jsmol" to install SPKG version 2022.1.0
>> > jupyter_lsp: no; standard, SPKG version 2.2.0 will be
>> > installed
>> > jupyter_server: no; standard, SPKG version 2.7.3 will be
>> > installed
>> > jupyter_server_terminals: no; standard, SPKG version 0.4.4 will be
>> > installed
>> > jupyter_sphinx: no; standard, SPKG version 0.5.3.p0 will be
>> > installed
>> > jupyterlab: no; standard, SPKG version 4.1.3 will be
>> > installed
>> > jupyterlab_mathjax2: no; standard, SPKG version 4.0.0 will be
>> > installed
>> > jupyterlab_pygments: no; standard, SPKG version 0.2.2 will be
>> > installed
>> > jupyterlab_server: no; standard, SPKG version 2.24.0 will be
>> > installed
>> > jupyterlab_widgets: no; standard, SPKG version 3.0.9 will be
>> > installed
>> > kenzo: optional, use "./configure --enable-kenzo"
>> > to install SPKG version 1.1.10
>> > kissat: optional, use "./configure --enable-kissat"
>> > to install SPKG version 3.1.0
>> > kiwisolver: no; standard, SPKG version 1.4.5 will be
>> > installed
>> > latte_int: optional, use "./configure
>> > --enable-latte_int" to install SPKG version 1.7.6
>> > lcalc: no suitable system package; standard, SPKG
>> > version 2.0.5 will be installed
>> > libatomic_ops: using system package; SPKG will not be
>> > installed
>> > libbraiding: no suitable system package; standard, SPKG
>> > version 1.2 will be installed
>> > libffi: using system package; SPKG will not be
>> > installed
>> > libgd: using system package; SPKG will not be
>> > installed
>> > libgraphviz: using system package
>> > libhomfly: no suitable system package; standard, SPKG
>> > version 1.02r6 will be installed
>> > libjpeg: using system package
>> > liblzma: using system package; SPKG will not be
>> > installed
>> > libnauty: using system package; SPKG will not be
>> > installed
>> > libogg: optional, use "./configure --enable-libogg"
>> > to install SPKG version 1.3.1.p0
>> > libpng: using system package; SPKG will not be
>> > installed
>> > libsemigroups: no suitable system package; optional, use
>> > "./configure --enable-libsemigroups" to install SPKG version 2.7.3
>> > libtheora: experimental, use "./configure
>> > --enable-libtheora" to install SPKG version 1.1.1
>> > libxml2: using system package
>> > lidia: optional, use "./configure --enable-lidia"
>> > to install SPKG version 2.3.0+latte-patches-2019-05-02
>> > lie: experimental, use "./configure
>> > --enable-lie" to install SPKG version 2.2.2
>> > linbox: no suitable system package; standard, SPKG
>> > version 1.7.0+sage-2024-05-18 will be installed
>> > llvm: not required on your platform
>> > lrcalc: no suitable system package; standard, SPKG
>> > version 2.1 will be installed
>> > lrcalc_python: no; standard, SPKG version 2.1 will be
>> > installed
>> > lrslib: no suitable system package; optional, use
>> > "./configure --enable-lrslib" to install SPKG version
>> > 071b+autotools-2021-07-13
>> > m4ri: SPKG version 20200125 is already installed
>> > m4rie: no suitable system package; standard, SPKG
>> > version 20200125 will be installed
>> > markupsafe: no; standard, SPKG version 2.1.5 will be
>> > installed
>> > mathics: no; optional pip package; use "./sage -i
>> > mathics" to install
>> > mathjax: no suitable system package; standard, SPKG
>> > version 3.2.0 will be installed
>> > matplotlib: no; standard, SPKG version 3.8.0 will be
>> > installed
>> > matplotlib_inline: no; standard, SPKG version 0.1.6 will be
>> > installed
>> > matroid_database: optional, use "./configure
>> > --enable-matroid_database" to install SPKG version 0.3
>> > maxima: no suitable system package; standard, SPKG
>> > version 5.47.0 will be installed
>> > mcqd: optional, use "./configure --enable-mcqd"
>> > to install SPKG version 1.0.p0
>> > meataxe: optional, use "./configure
>> > --enable-meataxe" to install SPKG version 1.0.1
>> > memory_allocator: no; standard, SPKG version 0.1.4 will be
>> > installed
>> > meson: using system package; SPKG will not be
>> > installed
>> > meson_python: no; standard, SPKG version 0.15.0 will be
>> > installed
>> > mistune: no; standard, SPKG version 2.0.4 will be
>> > installed
>> > modular_decomposition: experimental, use "./configure
>> > --enable-modular_decomposition" to install SPKG version 20100607
>> > modular_resolution: optional, use "./configure
>> > --enable-modular_resolution" to install SPKG version 1.1
>> > mpc: using system package; SPKG will not be
>> > installed
>> > mpfi: using system package; SPKG will not be
>> > installed
>> > mpfr: using system package; SPKG will not be
>> > installed
>> > mpfrcx: optional, use "./configure --enable-mpfrcx"
>> > to install SPKG version 0.6.3
>> > mpmath: no; standard, SPKG version 1.3.0 will be
>> > installed
>> > msolve: no suitable system package; optional, use
>> > "./configure --enable-msolve" to install SPKG version 0.6.5
>> > nauty: using system package; SPKG will not be
>> > installed
>> > nbclient: no; standard, SPKG version 0.8.0 will be
>> > installed
>> > nbconvert: no; standard, SPKG version 7.9.2 will be
>> > installed
>> > nbformat: no; standard, SPKG version 5.9.2 will be
>> > installed
>> > ncurses: using system package; SPKG will not be
>> > installed
>> > nest_asyncio: no; standard, SPKG version 1.6.0 will be
>> > installed
>> > networkx: no; standard, SPKG version 3.2.1 will be
>> > installed
>> > nibabel: no; optional pip package; use "./sage -i
>> > nibabel" to install
>> > ninja_build: using system package; SPKG will not be
>> > installed
>> > normaliz: optional, use "./configure
>> > --enable-normaliz" to install SPKG version 3.10.3
>> > notebook: no; standard, SPKG version 7.1.1 will be
>> > installed
>> > notebook_shim: no; standard, SPKG version 0.2.3 will be
>> > installed
>> > notedown: no; optional, use "./configure
>> > --enable-notedown" to install SPKG version 1.5.1
>> > ntl: using system package; SPKG will not be
>> > installed
>> > numpy: no suitable system package; standard, SPKG
>> > version 1.26.3 will be installed
>> > onetbb: using system package; SPKG will not be
>> > installed
>> > openblas: SPKG version 0.3.28 is already installed
>> > openssl: not required on your platform; SPKG will
>> > not be installed
>> > ore_algebra: no; optional pip package; use "./sage -i
>> > ore_algebra" to install
>> > osqp_python: no; optional, use "./configure
>> > --enable-osqp_python" to install SPKG version 0.6.3
>> > overrides: no; standard, SPKG version 7.4.0 will be
>> > installed
>> > p_group_cohomology: no; optional, use "./configure
>> > --enable-p_group_cohomology" to install SPKG version 3.3.3.p1
>> > packaging: no; standard, SPKG version 24.1 will be
>> > installed
>> > palp: no suitable system package; standard, SPKG
>> > version 2.11 will be installed
>> > pandoc: using system package
>> > pandoc_attributes: no; optional, use "./configure
>> > --enable-pandoc_attributes" to install SPKG version 8bc82f6d
>> > pandocfilters: no; standard, SPKG version 1.5.0 will be
>> > installed
>> > papilo: optional, use "./configure --enable-papilo"
>> > to install SPKG version 2.2.1
>> > pari: SPKG version 2.15.5 is already installed
>> > pari_elldata: no suitable system package; optional, use
>> > "./configure --enable-pari_elldata" to install SPKG version 20161017
>> > pari_galdata: SPKG version 20080411.p0 is already
>> > installed
>> > pari_galpol: no suitable system package; optional, use
>> > "./configure --enable-pari_galpol" to install SPKG version 20180625
>> > pari_jupyter: no; optional, use "./configure
>> > --enable-pari_jupyter" to install SPKG version 1.4.3
>> > pari_nftables: no suitable system package; optional, use
>> > "./configure --enable-pari_nftables" to install SPKG version 20080929
>> > pari_seadata: no suitable system package; optional, use
>> > "./configure --enable-pari_seadata" to install SPKG version 20090618
>> > pari_seadata_small: SPKG version 20090618.p0 is already
>> > installed
>> > parso: no; standard, SPKG version 0.8.4 will be
>> > installed
>> > patch: SPKG version 2.7.6 is already installed
>> > patchelf: using system package; SPKG will not be
>> > installed
>> > pathspec: no; standard, SPKG version 0.12.1 will be
>> > installed
>> > pdf2svg: using system package
>> > perl_cpan_polymake_prereq: no suitable system package; optional
>> > perl_mongodb: no suitable system package; optional
>> > perl_term_readline_gnu: no suitable system package; optional, use
>> > "./configure --enable-perl_term_readline_gnu" to install SPKG version 1.35
>> > pexpect: no; standard, SPKG version 4.9.0 will be
>> > installed
>> > phitigra: no; optional pip package; use "./sage -i
>> > phitigra" to install
>> > pickleshare: no; standard, SPKG version 0.7.5 will be
>> > installed
>> > pillow: no; standard, SPKG version 10.1.0 will be
>> > installed
>> > pip: no; standard, SPKG version 24.2 is already
>> > installed
>> > pkgconf: using system package; SPKG will not be
>> > installed
>> > pkgconfig: no; standard, SPKG version 1.5.5 will be
>> > installed
>> > planarity: no suitable system package; standard, SPKG
>> > version 3.0.1.0 will be installed
>> > plantri: optional, use "./configure
>> > --enable-plantri" to install SPKG version 5.3
>> > platformdirs: no; standard, SPKG version 4.2.2 will be
>> > installed
>> > pluggy: no; standard, SPKG version 1.5.0 will be
>> > installed
>> > ply: no; standard, SPKG version 3.11 will be
>> > installed
>> > polylib: experimental, use "./configure
>> > --enable-polylib" to install SPKG version 5.22.5
>> > polymake: no suitable system package; optional, use
>> > "./configure --enable-polymake" to install SPKG version 4.12
>> > polytopes_db: standard, SPKG version 20170220.p0 will be
>> > installed
>> > polytopes_db_4d: optional, use "./configure
>> > --enable-polytopes_db_4d" to install SPKG version 1.0
>> > ppl: using system package; SPKG will not be
>> > installed
>> > pplpy: no suitable system package; standard, SPKG
>> > version 0.8.9 will be installed
>> > pplpy_doc: standard, SPKG version 0.8.9 will be
>> > installed
>> > primecount: using system package; SPKG will not be
>> > installed
>> > primecountpy: no suitable system package; standard, SPKG
>> > version 0.1.0 will be installed
>> > primesieve: using system package; SPKG will not be
>> > installed
>> > prometheus_client: no; standard, SPKG version 0.14.1 will be
>> > installed
>> > prompt_toolkit: no; standard, SPKG version 3.0.43 will be
>> > installed
>> > psutil: no; standard, SPKG version 5.9.6 will be
>> > installed
>> > ptyprocess: no; standard, SPKG version 0.7.0 will be
>> > installed
>> > pure_eval: no; standard, SPKG version 0.2.2 will be
>> > installed
>> > py: no; standard, SPKG version 1.11.0 will be
>> > installed
>> > pybind11: no; standard, SPKG version 2.11.1 will be
>> > installed
>> > pybtex: no; optional pip package; use "./sage -i
>> > pybtex" to install
>> > pycosat: no; optional, use "./configure
>> > --enable-pycosat" to install SPKG version 0.6.3
>> > pycparser: no; standard, SPKG version 2.22 will be
>> > installed
>> > pycryptosat: no; optional pip package; use "./sage -i
>> > pycryptosat" to install
>> > pygments: no; standard, SPKG version 2.18.0 will be
>> > installed
>> > pygraphviz: no; optional pip package; use "./sage -i
>> > pygraphviz" to install
>> > pynormaliz: no; optional, use "./configure
>> > --enable-pynormaliz" to install SPKG version 2.20
>> > pyparsing: no; standard, SPKG version 3.1.2 will be
>> > installed
>> > pyppeteer: no; optional pip package; use "./sage -i
>> > pyppeteer" to install
>> > pyproject_api: no; standard, SPKG version 1.7.1 will be
>> > installed
>> > pyproject_hooks: standard, SPKG version 1.1.0 will be
>> > installed
>> > pyproject_metadata: no; standard, SPKG version 0.8.0 will be
>> > installed
>> > pyrsistent: no; standard, SPKG version 0.19.3 will be
>> > installed
>> > pyscipopt: no; optional, use "./configure
>> > --enable-pyscipopt" to install SPKG version 5.0.0
>> > pysingular: no; optional, use "./configure
>> > --enable-pysingular" to install SPKG version 0.9.7
>> > pytest: no; standard, SPKG version 8.3.2 will be
>> > installed
>> > pytest_mock: no; standard, SPKG version 3.14.0 will be
>> > installed
>> > pytest_xdist: no; standard, SPKG version 3.6.1 will be
>> > installed
>> > python3: using system package; SPKG will not be
>> > installed
>> > python_build: no; standard, SPKG version 1.2.1 will be
>> > installed
>> > python_flint: optional, use "./configure
>> > --enable-python_flint" to install SPKG version 0.6.0
>> > python_igraph: no; optional, use "./configure
>> > --enable-python_igraph" to install SPKG version 0.11.5
>> > python_json_logger: no; standard, SPKG version 2.0.7 will be
>> > installed
>> > pythran: no; standard, SPKG version 0.15.0 will be
>> > installed
>> > pytz: no; standard, SPKG version 2023.3.post1
>> > will be installed
>> > pytz_deprecation_shim: no; standard, SPKG version 0.1.0.post0 will
>> > be installed
>> > pyx: no; optional pip package; use "./sage -i
>> > pyx" to install
>> > pyyaml: no; standard, SPKG version 6.0.1 will be
>> > installed
>> > pyzmq: no; standard, SPKG version 25.1.1 will be
>> > installed
>> > qdldl_python: no; optional, use "./configure
>> > --enable-qdldl_python" to install SPKG version 0.1.5.post3
>> > qepcad: optional, use "./configure --enable-qepcad"
>> > to install SPKG version 1.74
>> > qhull: using system package; SPKG will not be
>> > installed
>> > r: optional
>> > r_jupyter: experimental, use "./configure
>> > --enable-r_jupyter" to install SPKG version none
>> > readline: using system package; SPKG will not be
>> > installed
>> > referencing: no; standard, SPKG version 0.23.0 will be
>> > installed
>> > requests: no; standard, SPKG version 2.32.2 will be
>> > installed
>> > rfc3339_validator: no; standard, SPKG version 0.1.4 will be
>> > installed
>> > rfc3986_validator: no; standard, SPKG version 0.1.1 will be
>> > installed
>> > rpy2: not required on your platform; SPKG will
>> > not be installed
>> > rst2ipynb: no; optional, use "./configure
>> > --enable-rst2ipynb" to install SPKG version 0.2.3
>> > rubiks: optional, use "./configure --enable-rubiks"
>> > to install SPKG version 20070912.p21
>> > rw: no suitable system package; standard, SPKG
>> > version 0.9 will be installed
>> > saclib: optional, use "./configure --enable-saclib"
>> > to install SPKG version 2.2.8
>> > sage_conf: standard, SPKG version 10.5 will be
>> > installed
>> > sage_docbuild: standard, SPKG version 10.5 will be
>> > installed
>> > sage_flatsurf: optional pip package; use "./sage -i
>> > sage_flatsurf" to install
>> > sage_numerical_backends_coin: optional, use "./configure
>> > --enable-sage_numerical_backends_coin" to install SPKG version 10.4
>> > sage_numerical_backends_cplex: optional, use "./configure
>> > --enable-sage_numerical_backends_cplex" to install SPKG version 10.4
>> > sage_numerical_backends_gurobi: optional, use "./configure
>> > --enable-sage_numerical_backends_gurobi" to install SPKG version 10.4
>> > sage_setup: standard, SPKG version 10.5 will be
>> > installed
>> > sage_sws2rst: optional, use "./configure
>> > --enable-sage_sws2rst" to install SPKG version 10.5
>> > sagelib: no; standard, SPKG version 10.5 will be
>> > installed
>> > sagemath_bliss: optional, use "./configure
>> > --enable-sagemath_bliss" to install SPKG version 10.5
>> > sagemath_categories: optional, use "./configure
>> > --enable-sagemath_categories" to install SPKG version 10.5
>> > sagemath_coxeter3: optional, use "./configure
>> > --enable-sagemath_coxeter3" to install SPKG version 10.5
>> > sagemath_doc_html: standard, SPKG will be installed
>> > sagemath_doc_pdf: optional, use "./configure
>> > --enable-sagemath_doc_pdf" to install SPKG version none
>> > sagemath_environment: optional, use "./configure
>> > --enable-sagemath_environment" to install SPKG version 10.5
>> > sagemath_mcqd: optional, use "./configure
>> > --enable-sagemath_mcqd" to install SPKG version 10.5
>> > sagemath_meataxe: optional, use "./configure
>> > --enable-sagemath_meataxe" to install SPKG version 10.5
>> > sagemath_objects: optional, use "./configure
>> > --enable-sagemath_objects" to install SPKG version 10.5
>> > sagemath_repl: optional, use "./configure
>> > --enable-sagemath_repl" to install SPKG version 10.5
>> > sagemath_sirocco: optional, use "./configure
>> > --enable-sagemath_sirocco" to install SPKG version 10.5
>> > sagemath_tdlib: optional, use "./configure
>> > --enable-sagemath_tdlib" to install SPKG version 10.5
>> > sagenb_export: no; standard, SPKG version 3.3 will be
>> > installed
>> > sagetex: no; standard, SPKG version 3.6.1 will be
>> > installed
>> > sbcl: using system package
>> > scip: optional, use "./configure --enable-scip"
>> > to install SPKG version 9.0.1
>> > scip_sdp: optional, use "./configure
>> > --enable-scip_sdp" to install SPKG version 4.3.0
>> > scipy: no suitable system package; standard, SPKG
>> > version 1.12.0 will be installed
>> > scs: no; optional, use "./configure
>> > --enable-scs" to install SPKG version 3.2.3
>> > send2trash: no; standard, SPKG version 1.8.3 will be
>> > installed
>> > setuptools: no; standard, SPKG version 73.0.1 will be
>> > installed
>> > setuptools_scm: no; standard, SPKG version 8.1.0 will be
>> > installed
>> > singular: no suitable system package; standard, SPKG
>> > version 4.4.0 will be installed
>> > singular_jupyter: no; optional, use "./configure
>> > --enable-singular_jupyter" to install SPKG version 0.9.7
>> > sirocco: optional, use "./configure
>> > --enable-sirocco" to install SPKG version 2.1.0
>> > six: no; standard, SPKG version 1.16.0 will be
>> > installed
>> > slabbe: no; optional pip package; use "./sage -i
>> > slabbe" to install
>> > snappy: no; optional pip package; use "./sage -i
>> > snappy" to install
>> > sniffio: no; standard, SPKG version 1.3.1 will be
>> > installed
>> > snowballstemmer: no; standard, SPKG version 2.2.0 will be
>> > installed
>> > soplex: optional, use "./configure --enable-soplex"
>> > to install SPKG version 7.0.1
>> > soupsieve: no; standard, SPKG version 2.5 will be
>> > installed
>> > sphinx: no; standard, SPKG version 7.4.7 will be
>> > installed
>> > sphinx_basic_ng: no; standard, SPKG version 1.0.0b2 will be
>> > installed
>> > sphinx_copybutton: no; standard, SPKG version 0.5.2 will be
>> > installed
>> > sphinx_inline_tabs: no; standard, SPKG version 2023.4.21 will
>> > be installed
>> > sphinxcontrib_applehelp: no; standard, SPKG version 1.0.8 will be
>> > installed
>> > sphinxcontrib_devhelp: no; standard, SPKG version 1.0.6 will be
>> > installed
>> > sphinxcontrib_htmlhelp: no; standard, SPKG version 2.0.5 will be
>> > installed
>> > sphinxcontrib_jsmath: no; standard, SPKG version 1.0.1 will be
>> > installed
>> > sphinxcontrib_qthelp: no; standard, SPKG version 1.0.7 will be
>> > installed
>> > sphinxcontrib_serializinghtml: no; standard, SPKG version 1.1.10 will be
>> > installed
>> > sphinxcontrib_websupport: no; standard, SPKG version 1.2.7 will be
>> > installed
>> > sqlalchemy: no; optional pip package; use "./sage -i
>> > sqlalchemy" to install
>> > sqlite: not required on your platform; SPKG will
>> > not be installed
>> > stack_data: no; standard, SPKG version 0.6.3 will be
>> > installed
>> > suitesparse: no suitable system package; standard, SPKG
>> > version 7.8.0 will be installed
>> > surf: experimental, use "./configure
>> > --enable-surf" to install SPKG version 1.0.6-gcc6
>> > surface_dynamics: no; optional pip package; use "./sage -i
>> > surface_dynamics" to install
>> > symengine: no suitable system package; optional, use
>> > "./configure --enable-symengine" to install SPKG version 0.11.2
>> > symengine_py: no; optional, use "./configure
>> > --enable-symengine_py" to install SPKG version 0.11.0
>> > symmetrica: no suitable system package; standard, SPKG
>> > version 3.0.1 will be installed
>> > sympow: no suitable system package; standard, SPKG
>> > version 2.023.6 will be installed
>> > sympy: no; standard, SPKG version 1.13.2 will be
>> > installed
>> > tachyon: no suitable system package; standard, SPKG
>> > version 0.99.5.p0 will be installed
>> > tdlib: optional, use "./configure --enable-tdlib"
>> > to install SPKG version 0.9.3.p0
>> > terminado: no; standard, SPKG version 0.17.1 will be
>> > installed
>> > texlive: no suitable system package; optional, use
>> > "./configure --enable-texlive" to install SPKG version none
>> > texlive_luatex: no suitable system package; optional
>> > texttable: no; optional, use "./configure
>> > --enable-texttable" to install SPKG version 1.7.0
>> > threejs: standard, SPKG version r122.p0 will be
>> > installed
>> > tides: optional, use "./configure --enable-tides"
>> > to install SPKG version 2.0.p0
>> > tinycss2: no; standard, SPKG version 1.2.1 will be
>> > installed
>> > tomli: no; standard, SPKG version 2.0.1 will be
>> > installed
>> > topcom: optional, use "./configure --enable-topcom"
>> > to install SPKG version 1.1.2
>> > tornado: no; standard, SPKG version 6.4 will be
>> > installed
>> > tox: using system package; SPKG will not be
>> > installed
>> > traitlets: no; standard, SPKG version 5.14.3 will be
>> > installed
>> > trove_classifiers: no; standard, SPKG version 2024.7.2 will be
>> > installed
>> > types_python_dateutil: no; standard, SPKG version 2.9.0.20240316
>> > will be installed
>> > typing_extensions: no; standard, SPKG version 4.12.2 will be
>> > installed
>> > tzdata: standard, SPKG version 2023.3 will be
>> > installed
>> > tzlocal: no; standard, SPKG version 5.0.1 will be
>> > installed
>> > uri_template: no; standard, SPKG version 1.3.0 will be
>> > installed
>> > urllib3: no; standard, SPKG version 2.1.0 will be
>> > installed
>> > valgrind: optional
>> > virtualenv: not required on your platform; SPKG will
>> > not be installed
>> > wcwidth: no; standard, SPKG version 0.2.12 will be
>> > installed
>> > webcolors: no; standard, SPKG version 1.13 will be
>> > installed
>> > webencodings: no; standard, SPKG version 0.5.1 will be
>> > installed
>> > websocket_client: no; standard, SPKG version 1.6.4 will be
>> > installed
>> > wheel: no; standard, SPKG version 0.44.0 will be
>> > installed
>> > widgetsnbextension: no; standard, SPKG version 4.0.9 will be
>> > installed
>> > xindy: no suitable system package; optional
>> > xz: not required on your platform; SPKG will
>> > not be installed
>> > zeromq: using system package; SPKG will not be
>> > installed
>> > zipp: no; standard, SPKG version 3.19.0 will be
>> > installed
>> > zlib: using system package; SPKG will not be
>> > installed
>> > checking that generated files are newer than configure... done
>> > configure: creating ./config.status
>> > configure:
>> >
>> > notice: the following SPKGs did not find equivalent system packages:
>> >
>> > cvxopt cypari fflas_ffpack fplll fpylll gf2x gfan giac gsl iml
>> > lcalc libbraiding libhomfly linbox lrcalc m4rie mathjax maxima numpy palp
>> > planarity pplpy primecountpy rw scipy singular suitesparse symmetrica
>> > sympow tachyon 4ti2 _develop _recommended bliss cbc coxeter3 free_fonts
>> > fricas gp2c igraph libsemigroups lrslib msolve pari_elldata pari_galpol
>> > pari_nftables pari_seadata perl_cpan_polymake_prereq perl_mongodb
>> > perl_term_readline_gnu polymake symengine texlive texlive_luatex xindy
>> >
>> > checking for the package system in use... (ignoring conda because no
>> > environment is active) homebrew
>> > configure:
>> >
>> > hint: installing the following system packages, if not
>> > already present, is recommended and may avoid having to
>> > build them (though some may have to be built anyway):
>> >
>> > $ brew install fplll gsl maxima singular suite-sparse
>> >
>> > Homebrew can issue suggestions regarding keg-only packages.
>> > The following command is to automatically apply these suggestions
>> > for packages relevant for Sage to make them available for the build.
>> > Run it once to apply the suggestions for the current session.
>> > Add it to your shell profile to apply them for all future sessions.
>> >
>> > $ source /Users/vishalshahi/Desktop/sage/sage/.homebrew-build-env
>> >
>> > configure:
>> >
>> > hint: installing the following system packages, if not
>> > already present, may provide additional optional features:
>> >
>> > $ brew install gnupg texinfo cbc igraph apaffenholz/polymake/polymake
>> > symengine
>> >
>> > Homebrew can issue suggestions regarding keg-only packages.
>> > The following command is to automatically apply these suggestions
>> > for packages relevant for Sage to make them available for the build.
>> > Run it once to apply the suggestions for the current session.
>> > Add it to your shell profile to apply them for all future sessions.
>> >
>> > $ source /Users/vishalshahi/Desktop/sage/sage/.homebrew-build-env
>> >
>> > configure:
>> >
>> > hint: After installation, re-run configure using:
>> >
>> > $ make reconfigure
>> >
>> > config.status: creating build/make/Makefile-auto
>> > config.status: creating build/make/Makefile
>> > config.status: creating src/bin/sage-env-config
>> > config.status: creating src/bin/sage-src-env-config
>> > config.status: creating build/bin/sage-build-env-config
>> > config.status: creating pkgs/sage-conf/_sage_conf/_conf.py
>> > config.status: executing depfiles commands
>> > config.status: executing mkdirs commands
>> > config.status: creating directory
>> > /Users/vishalshahi/Desktop/sage/sage/logs/pkgs
>> > config.status: creating directory local
>> > config.status: creating directory local/bin
>> > config.status: creating directory local/etc
>> > config.status: creating directory local/include
>> > config.status: creating directory local/lib
>> > config.status: creating directory local/lib/pkgconfig
>> > config.status: creating directory local/share
>> > config.status: creating directory local/var/lib/sage/installed
>> > config.status: creating directory local/var/tmp/sage/build
>> > config.status: executing links commands
>> > config.status: creating convenience symlink prefix -> local
>> > config.status: creating convenience symlink venv ->
>> > local/var/lib/sage/venv-python3.9
>> > vishalshahi@Vishals-MacBook-Air-2 sage %
>> >
>> > On Sun, Mar 30, 2025 at 6:13 AM Dima Pasechnik <dim...@gmail.com> wrote:
>> >
>> > > You can install Homebrew's gsl package (so this will solve whatever
>> > > problem you have with building it), and many more Homebrew packages: check
>> > > out the last 2 pages of the output of
>> > >
>> > > ./configure
>> > >
>> > > for a list.
>> > >
>> > > We prefer not a part of the config.log, but the whole file. You can
>> > > attach files here.
>> > >
>> > >
>> > >
>> > >
>> > > On 29 March 2025 11:41:32 GMT-05:00, "'Vishal Shahi 4-Yr B.Tech.:
>> > > Electronics Engg., IIT(BHU)' via sage-devel" <sage-...@googlegroups.com>
>> > > wrote:
>> > >
>> > >> yes i am using home brew
>> > >> this is config.log
>> > >>
>> > >> ne/lib/pkgconfig:/opt/homebrew/opt/openssl/lib/pkgconfig:/opt/homebrew/opt/openblas/lib/pkgconfig:/opt/homebrew/lib/pkgconfig:
>> > >> --no-create --no-recursion
>> > >>
>> > >>
>> > >> ## --------- ##
>> > >>
>> > >> ## Platform. ##
>> > >>
>> > >> ## --------- ##
>> > >>
>> > >>
>> > >> hostname = Vishals-MacBook-Air-2.local
>> > >>
>> > >> uname -m = arm64
>> > >>
>> > >> uname -r = 24.3.0
>> > >>
>> > >> uname -s = Darwin
>> > >>
>> > >> uname -v = Darwin Kernel Version 24.3.0: Thu Jan 2 20:24:06 PST 2025;
>> > >> root:xnu-11215.81.4~3/RELEASE_ARM64_T8103
>> > >>
>> > >>
>> > >> /usr/bin/uname -p = arm
>> > >>
>> > >> /bin/uname -X = unknown
>> > >>
>> > >>
>> > >> /bin/arch = unknown
>> > >>
>> > >> /usr/bin/arch -k = unknown
>> > >>
>> > >> /usr/convex/getsysinfo = unknown
>> > >>
>> > >> /usr/bin/hostinfo = Mach kernel version:
>> > >>
>> > >> Darwin Kernel Version 24.3.0: Thu Jan 2 20:24:06 PST 2025;
>> > >> root:xnu-11215.81.4~3/RELEASE_ARM64_T8103
>> > >>
>> > >> Kernel configured for up to 8 processors.
>> > >>
>> > >> 8 processors are physically available.
>> > >>
>> > >> 8 processors are logically available.
>> > >>
>> > >> Processor type: arm64e (ARM64E)
>> > >>
>> > >> Processors active: 0 1 2 3 4 5 6 7
>> > >>
>> > >> Primary memory available: 8.00 gigabytes
>> > >>
>> > >> Default processor set: 550 tasks, 2421 threads, 8 processors
>> > >>
>> > >> Load average: 1.69, Mach factor: 6.30
>> > >>
>> > >> /bin/machine = unknown
>> > >>
>> > >> /usr/bin/oslevel = unknown
>> > >>
>> > >> /bin/universe = unknown
>> > >>
>> > >>
>> > >> PATH: /opt/homebrew/opt/polymake/bin/
>> > >>
>> > >> PATH: /opt/homebrew/opt/texinfo/bin/
>> > >>
>> > >>
>> > >> /usr/bin/uname -p = arm
>> > >>
>> > >> /bin/uname -X = unknown
>> > >>
>> > >>
>> > >> /bin/arch = unknown
>> > >>
>> > >> /usr/bin/arch -k = unknown
>> > >>
>> > >> /usr/convex/getsysinfo = unknown
>> > >>
>> > >> /usr/bin/hostinfo = Mach kernel version:
>> > >>
>> > >> Darwin Kernel Version 24.3.0: Thu Jan 2 20:24:06 PST 2025;
>> > >> root:xnu-11215.81.4~3/RELEASE_ARM64_T8103
>> > >>
>> > >> Kernel configured for up to 8 processors.
>> > >>
>> > >> 8 processors are physically available.
>> > >>
>> > >> 8 processors are logically available.
>> > >>
>> > >> Processor type: arm64e (ARM64E)
>> > >>
>> > >> Processors active: 0 1 2 3 4 5 6 7
>> > >>
>> > >> Primary memory available: 8.00 gigabytes
>> > >>
>> > >> Default processor set: 550 tasks, 2421 threads, 8 processors
>> > >>
>> > >> Load average: 1.69, Mach factor: 6.30
>> > >>
>> > >> /bin/machine = unknown
>> > >>
>> > >> /usr/bin/oslevel = unknown
>> > >>
>> > >> /bin/universe = unknown
>> > >>
>> > >>
>> > >> PATH: /opt/homebrew/opt/polymake/bin/
>> > >>
>> > >> PATH: /opt/homebrew/opt/texinfo/bin/
>> > >>
>> > >> PATH: /opt/homebrew/opt/bzip2/bin/
>> > >>
>> > >> PATH: /opt/homebrew/opt/polymake/bin/
>> > >>
>> > >> PATH: /opt/homebrew/opt/texinfo/bin/
>> > >>
>> > >> PATH: /opt/homebrew/opt/bzip2/bin/
>> > >>
>> > >> PATH: /Users/vishalshahi/.nvm/versions/node/v18.20.7/bin/
>> > >>
>> > >> PATH: /Users/vishalshahi/.pyenv/shims/
>> > >>
>> > >> PATH: /opt/miniconda3/condabin/
>> > >>
>> > >> PATH: /opt/homebrew/bin/
>> > >>
>> > >> PATH: /opt/homebrew/sbin/
>> > >>
>> > >> PATH: /Library/Frameworks/Python.framework/Versions/3.12/bin/
>> > >>
>> > >> PATH: /usr/local/bin/
>> > >>
>> > >> PATH: /System/Cryptexes/App/usr/bin/
>> > >>
>> > >> PATH: /usr/bin/
>> > >>
>> > >> PATH: /bin/
>> > >>
>> > >> PATH: /usr/sbin/
>> > >>
>> > >> PATH: /sbin/
>> > >>
>> > >> PATH:
>> > >> /var/run/com.apple.security.cryptexd/codex.system/bootstrap/usr/local/bin/
>> > >>
>> > >> PATH: /var/run/com.apple.security.cryptexd/codex.system/bootstrap/usr/bin/
>> > >>
>> > >> PATH:
>> > >> /var/run/com.apple.security.cryptexd/codex.system/bootstrap/usr/appleinternal/bin/
>> > >>
>> > >> PATH: /Library/Apple/usr/bin/
>> > >>
>> > >> PATH: /Users/vishalshahi/.cargo/bin/
>> > >>
>> > >>
>> > >>
>> > >> ## ----------- ##
>> > >>
>> > >> ## Core tests. ##
>> > >>
>> > >> ## ----------- ##
>> > >>
>> > >>
>> > >> configure:5522: looking for aux files: config.guess config.sub compile
>> > >> config.rpath missing install-sh
>> > >>
>> > >> configure:5535: trying ./config/
>> > >>
>> > >> configure:5564: ./config/config.guess found
>> > >>
>> > >> configure:5564: ./config/config.sub found
>> > >>
>> > >> configure:5564: ./config/compile found
>> > >>
>> > >> configure:5564: ./config/config.rpath found
>> > >>
>> > >> configure:5564: ./config/missing found
>> > >>
>> > >> configure:5546: ./config/install-sh found
>> > >>
>> > >> configure:5702: checking for a BSD-compatible install
>> > >>
>> > >> configure:5776: result: /opt/homebrew/bin/ginstall -c
>> > >>
>> > >> configure:5787: checking whether sleep supports fractional seconds
>> > >>
>> > >> configure:5803: result: yes
>> > >>
>> > >> configure:5806: checking filesystem timestamp resolution
>> > >>
>> > >> configure:5941: result: 2
>> > >>
>> > >> configure:5946: checking whether build environment is sane
>> > >>
>> > >> configure:5987: result: yes
>> > >>
>> > >> configure:6158: checking for a race-free mkdir -p
>> > >>
>> > >> configure:6201: result: /opt/homebrew/bin/gmkdir -p
>> > >>
>> > >> configure:6208: checking for gawk
>> > >>
>> > >> configure:6244: result: no
>> > >>
>> > >> configure:6208: checking for mawk
>> > >>
>> > >> configure:6244: result: no
>> > >>
>> > >> configure:6208: checking for nawk
>> > >>
>> > >> configure:6244: result: no
>> > >>
>> > >> configure:6208: checking for awk
>> > >>
>> > >> configure:6229: found /usr/bin/awk
>> > >>
>> > >> configure:6241: result: awk
>> > >>
>> > >> configure:6252: checking whether make sets $(MAKE)
>> > >>
>> > >> configure:6276: result: yes
>> > >>
>> > >> configure:6302: checking whether make supports nested variables
>> > >>
>> > >> configure:6321: result: yes
>> > >>
>> > >> configure:6335: checking xargs -n works
>> > >>
>> > >> configure:6351: result: yes
>> > >>
>> > >> configure:6452: checking whether to enable maintainer-specific portions
>> > >> of Makefiles
>> > >>
>> > >> configure:6463: result: yes
>> > >>
>> > >> configure:6492: checking whether make supports the include directive
>> > >>
>> > >> configure:6507: make -f confmf.GNU && cat confinc.out
>> > >>
>> > >> this is the am__doit target
>> > >>
>> > >> configure:6510: $? = 0
>> > >>
>> > >> configure:6529: result: yes (GNU style)
>> > >>
>> > >> configure:6606: checking for gcc
>> > >>
>> > >> configure:6627: found /usr/bin/gcc
>> > >>
>> > >> configure:6639: result: gcc
>> > >>
>> > >> configure:6998: checking for C compiler version
>> > >>
>> > >> configure:7007: gcc --version >&5
>> > >>
>> > >> Apple clang version 16.0.0 (clang-1600.0.26.6)
>> > >>
>> > >> Target: arm64-apple-darwin24.3.0
>> > >>
>> > >> Thread model: posix
>> > >>
>> > >> InstalledDir: /Library/Developer/CommandLineTools/usr/bin
>> > >>
>> > >> configure:7018: $? = 0
>> > >>
>> > >> configure:7007: gcc -v >&5
>> > >>
>> > >> Apple clang version 16.0.0 (clang-1600.0.26.6)
>> > >>
>> > >> Target: arm64-apple-darwin24.3.0
>> > >>
>> > >> Thread model: posix
>> > >>
>> > >> InstalledDir: /Library/Developer/CommandLineTools/usr/bin
>> > >>
>> > >> configure:7018: $? = 0
>> > >>
>> > >> configure:7007: gcc -V >&5
>> > >>
>> > >> clang: error: argument to '-V' is missing (expected 1 value)
>> > >>
>> > >> clang: error: no input files
>> > >>
>> > >> configure:7018: $? = 1
>> > >>
>> > >> configure:7007: gcc -qversion >&5
>> > >>
>> > >> clang: error: unknown argument '-qversion'; did you mean '--version'?
>> > >>
>> > >> clang: error: no input files
>> > >>
>> > >> configure:7018: $? = 1
>> > >>
>> > >> configure:7007: gcc -version >&5
>> > >>
>> > >> clang: error: unknown argument '-version'; did you mean '--version'?
>> > >>
>> > >> clang: error: no input files
>> > >>
>> > >> configure:7018: $? = 1
>> > >>
>> > >> configure:7038: checking whether the C compiler works
>> > >>
>> > >> configure:7060: gcc conftest.c >&5
>> > >>
>> > >> configure:7064: $? = 0
>> > >>
>> > >> configure:7115: result: yes
>> > >>
>> > >> configure:7119: checking for C compiler default output file name
>> > >>
>> > >> configure:7121: result: a.out
>> > >>
>> > >>
>> > >> Do you need more sir ?

>> > >>
>> > >>
>> > >>
>> > >> On Sat, Mar 29, 2025 at 8:56 PM Dima Pasechnik <dim...@gmail.com> wrote:
>> > >>
>> > >>> Do you use Homebrew?

>> > >>> Please post top-level config.log
>> > >>>
>> > >>>
>> > >>> On 29 March 2025 01:29:35 GMT-05:00, 'Vishal Shahi' via sage-devel <

>> > >>> sage-...@googlegroups.com> wrote:
>> > >>>
>> > >>>> Dear Sage Development Team,
>> > >>>>
>> > >>>> I am experiencing an issue while building Sage on my MacBook Air M1
>> > >>>> running macOS Sequoia. I followed all instructions outlined in the GitHub
>> > >>>> README, yet I continually receive an error during the build process,
>> > >>>> specifically when attempting to configure gsl-2.7.1.
>> > >>>>

>> > >>>> ```
>> > >>>>
>> > >>>> [gsl-2.7.1] [spkg-install] checking host system type...
>> > >>>> arm-apple-darwin24.3.0

>> > >>>>
>> > >>>> [gsl-2.7.1] [spkg-install] checking for gcc... gcc
>> > >>>>
>> > >>>> [gsl-2.7.1] [spkg-install] checking whether the C compiler works... no
>> > >>>>
>> > >>>> [gsl-2.7.1] [spkg-install] configure: error: in
>> > >>>> `/Users/vishalshahi/Desktop/sage/sage/local/var/tmp/sage/build/gsl-2.7.1/src':
>> > >>>>
>> > >>>> [gsl-2.7.1] [spkg-install] configure: error: C compiler cannot create
>> > >>>> executables
>> > >>>>
>> > >>>> [gsl-2.7.1] [spkg-install] See `config.log' for more details
>> > >>>>
>> > >>>> [gsl-2.7.1] [spkg-install]
>> > >>>> ********************************************************************************
>> > >>>>

>> > >>>> [gsl-2.7.1] [spkg-install] Error configuring gsl-2.7.1 See the file
>> > >>>>
>> > >>>> [gsl-2.7.1] [spkg-install]
>> > >>>> /Users/vishalshahi/Desktop/sage/sage/local/var/tmp/sage/build/gsl-2.7.1/src/config.log
>> > >>>>
>> > >>>> [gsl-2.7.1] [spkg-install] for details.
>> > >>>>
>> > >>>> [gsl-2.7.1] [spkg-install]
>> > >>>> ********************************************************************************
>> > >>>>
>> > >>>> [gsl-2.7.1]
>> > >>>> ************************************************************************
>> > >>>>
>> > >>>> [gsl-2.7.1] Error installing package gsl-2.7.1
>> > >>>>
>> > >>>> [gsl-2.7.1]
>> > >>>> ************************************************************************
>> > >>>>
>> > >>>> [gsl-2.7.1] Please email sage-devel (
>> > >>>> http://groups.google.com/group/sage-devel)
>> > >>>>
>> > >>>> [gsl-2.7.1] explaining the problem and including the log files
>> > >>>>
>> > >>>> [gsl-2.7.1]
>> > >>>> /Users/vishalshahi/Desktop/sage/sage/logs/pkgs/gsl-2.7.1.log
>> > >>>>
>> > >>>> [gsl-2.7.1] and
>> > >>>>
>> > >>>> [gsl-2.7.1] /Users/vishalshahi/Desktop/sage/sage/config.log
>> > >>>>
>> > >>>> [gsl-2.7.1] Describe your computer, operating system, etc.
>> > >>>>
>> > >>>> [gsl-2.7.1] If you want to try to fix the problem yourself, *don't*
>> > >>>> just cd to
>> > >>>>
>> > >>>> [gsl-2.7.1]
>> > >>>> /Users/vishalshahi/Desktop/sage/sage/local/var/tmp/sage/build/gsl-2.7.1 and
>> > >>>> type 'make' or whatever is appropriate.
>> > >>>>
>> > >>>> [gsl-2.7.1] Instead, the following commands setup all environment
>> > >>>> variables
>> > >>>>
>> > >>>> [gsl-2.7.1] correctly and load a subshell for you to debug the error:
>> > >>>>
>> > >>>> [gsl-2.7.1] (cd
>> > >>>> '/Users/vishalshahi/Desktop/sage/sage/local/var/tmp/sage/build/gsl-2.7.1'
>> > >>>> && '/Users/vishalshahi/Desktop/sage/sage/sage' --buildsh)
>> > >>>>
>> > >>>> [gsl-2.7.1] When you are done debugging, you can type "exit" to leave
>> > >>>> the subshell.
>> > >>>>
>> > >>>> [gsl-2.7.1]
>> > >>>> ************************************************************************
>> > >>>>
>> > >>>> make[4]: *** [gsl-SAGE_LOCAL-no-deps] Error 1
>> > >>>>
>> > >>>> make[3]: ***
>> > >>>> [/Users/vishalshahi/Desktop/sage/sage/local/var/lib/sage/installed/gsl-2.7.1]
>> > >>>> Error 2
>> > >>>>
>> > >>>> make[2]: *** [all-build] Error 2
>> > >>>>
>> > >>>> ***************************************************************
>> > >>>>
>> > >>>> Error building Sage.
>> > >>>>
>> > >>>>
>> > >>>> The following package(s) may have failed to build (not necessarily
>> > >>>>
>> > >>>> during this run of 'make all-build'):
>> > >>>>
>> > >>>>
>> > >>>> * package: gsl-2.7.1
>> > >>>>
>> > >>>> last build time: Mar 29 11:25
>> > >>>>
>> > >>>> log file:
>> > >>>> /Users/vishalshahi/Desktop/sage/sage/logs/pkgs/gsl-2.7.1.log
>> > >>>>
>> > >>>> build directory:
>> > >>>> /Users/vishalshahi/Desktop/sage/sage/local/var/tmp/sage/build/gsl-2.7.1
>> > >>>> ```
>> > >>>> log file gsl

>> > >>>> [spkg-install] configure: error: C compiler cannot create executables

>> > >>>> [spkg-install] See `config.log' for more details

>> > >>>> [spkg-install] checking for a BSD-compatible install...
>> > >>>> /opt/homebrew/bin/ginstall -c
>> > >>>> [spkg-install] checking whether build environment is sane... yes
>> > >>>> [spkg-install] checking for a race-free mkdir -p...
>> > >>>> /opt/homebrew/bin/gmkdir -p
>> > >>>> [spkg-install] checking for gawk... no
>> > >>>> [spkg-install] checking for mawk... no
>> > >>>> [spkg-install] checking for nawk... no
>> > >>>> [spkg-install] checking for awk... awk
>> > >>>> [spkg-install] checking whether make sets $(MAKE)... yes
>> > >>>> [spkg-install] checking whether make supports nested variables... yes
>> > >>>> [spkg-install] checking whether to enable maintainer-specific portions
>> > >>>> of Makefiles... no
>> > >>>> [spkg-install] checking for a sed that does not truncate output...
>> > >>>> /usr/bin/sed
>> > >>>> [spkg-install] checking whether make sets $(MAKE)... (cached) yes
>> > >>>> [spkg-install] checking build system type... arm-apple-darwin24.3.0
>> > >>>> [spkg-install] checking host system type... arm-apple-darwin24.3.0

>> > >>>> [spkg-install] checking for gcc... gcc

>> > >>>> [spkg-install] checking whether the C compiler works... no

>> > >>>> [spkg-install] configure: error: in
>> > >>>> `/Users/vishalshahi/Desktop/sage/sage/local/var/tmp/sage/build/gsl-2.7.1/src':

>> > >>>> [spkg-install] configure: error: C compiler cannot create executables

>> > >>>> [spkg-install] See `config.log' for more details

>> > >>>> [spkg-install]
>> > >>>> ********************************************************************************
>> > >>>> [spkg-install] Error configuring gsl-2.7.1 See the file
>> > >>>> [spkg-install]
>> > >>>> /Users/vishalshahi/Desktop/sage/sage/local/var/tmp/sage/build/gsl-2.7.1/src/config.log
>> > >>>> [spkg-install] for details.
>> > >>>> [spkg-install]
>> > >>>> ********************************************************************************
>> > >>>> ************************************************************************
>> > >>>> Error installing package gsl-2.7.1
>> > >>>> ************************************************************************
>> > >>>> Please email sage-devel (http://groups.google.com/group/sage-devel)
>> > >>>> explaining the problem and including the log files
>> > >>>> /Users/vishalshahi/Desktop/sage/sage/logs/pkgs/gsl-2.7.1.log
>> > >>>> and
>> > >>>> /Users/vishalshahi/Desktop/sage/sage/config.log
>> > >>>> Describe your computer, operating system, etc.
>> > >>>> If you want to try to fix the problem yourself, *don't* just cd to
>> > >>>> /Users/vishalshahi/Desktop/sage/sage/local/var/tmp/sage/build/gsl-2.7.1
>> > >>>> and type 'make' or whatever is appropriate.
>> > >>>> Instead, the following commands setup all environment variables
>> > >>>> correctly and load a subshell for you to debug the error:
>> > >>>> (cd
>> > >>>> '/Users/vishalshahi/Desktop/sage/sage/local/var/tmp/sage/build/gsl-2.7.1'
>> > >>>> && '/Users/vishalshahi/Desktop/sage/sage/sage' --buildsh)
>> > >>>> When you are done debugging, you can type "exit" to leave the subshell.
>> > >>>> ************************************************************************
>> > >>>> config.log
>> > >>>> #define HAVE_ICONV 1
>> > >>>> #define ICONV_CONST
>> > >>>> #define HAVE_ZMQ /**/
>> > >>>>
>> > >>>> configure: exit 0
>> > >>>>
>> > >>>> ## ---------------------- ##
>> > >>>> ## Running config.status. ##
>> > >>>> ## ---------------------- ##
>> > >>>>
>> > >>>> This file was extended by Sage config.status 10.5, which was
>> > >>>> generated by GNU Autoconf 2.72. Invocation command line was
>> > >>>>
>> > >>>> CONFIG_FILES =
>> > >>>> CONFIG_HEADERS =
>> > >>>> CONFIG_LINKS =
>> > >>>> CONFIG_COMMANDS =
>> > >>>> $ ./config.status
>> > >>>>
>> > >>>> on Vishals-MacBook-Air-2.local
>> > >>>>
>> > >>>> config.status:4031: creating build/make/Makefile-auto
>> > >>>> config.status:4031: creating build/make/Makefile
>> > >>>> config.status:4031: creating src/bin/sage-env-config
>> > >>>> config.status:4031: creating src/bin/sage-src-env-config
>> > >>>> config.status:4031: creating build/bin/sage-build-env-config
>> > >>>> config.status:4031: creating pkgs/sage-conf/_sage_conf/_conf.py
>> > >>>> config.status:4203: executing depfiles commands
>> > >>>> config.status:4203: executing mkdirs commands
>> > >>>> config.status:4335: creating directory
>> > >>>> /Users/vishalshahi/Desktop/sage/sage/logs/pkgs
>> > >>>> config.status:4335: creating directory local
>> > >>>> config.status:4335: creating directory local/bin
>> > >>>> config.status:4335: creating directory local/etc
>> > >>>> config.status:4335: creating directory local/include
>> > >>>> config.status:4335: creating directory local/lib
>> > >>>> config.status:4335: creating directory local/lib/pkgconfig
>> > >>>> config.status:4335: creating directory local/share
>> > >>>> config.status:4335: creating directory local/var/lib/sage/installed
>> > >>>> config.status:4354: creating directory local/var/tmp/sage/build
>> > >>>> config.status:4203: executing links commands
>> > >>>> config.status:4370: creating convenience symlink prefix -> local
>> > >>>> config.status:4386: creating convenience symlink venv ->
>> > >>>> local/var/lib/sage/venv-python3.9
>> > >>>>
>> > >>>> --
>> > >>> You received this message because you are subscribed to the Google
>> > >>> Groups "sage-devel" group.
>> > >>> To unsubscribe from this group and stop receiving emails from it, send
>> > >>> an email to sage-devel+...@googlegroups.com.
>> > >>> To view this discussion visit
>> > >>> https://groups.google.com/d/msgid/sage-devel/EB91F382-B326-4873-B115-9EC41C53753E%40gmail.com
>> > >>> <https://groups.google.com/d/msgid/sage-devel/EB91F382-B326-4873-B115-9EC41C53753E%40gmail.com?utm_medium=email&utm_source=footer>
>> > >>> .
>> > >>>
>> > >> --
>> > > You received this message because you are subscribed to the Google Groups
>> > > "sage-devel" group.
>> > > To unsubscribe from this group and stop receiving emails from it, send an
>> > > email to sage-devel+...@googlegroups.com.
>> > > To view this discussion visit
>> > > https://groups.google.com/d/msgid/sage-devel/6AF38F98-63D7-47F3-8A08-92EF3B8B4FAA%40gmail.com
>> > > <https://groups.google.com/d/msgid/sage-devel/6AF38F98-63D7-47F3-8A08-92EF3B8B4FAA%40gmail.com?utm_medium=email&utm_source=footer>
>> > > .
>> > >
>> >
>> > --
>> > You received this message because you are subscribed to the Google Groups "sage-devel" group.
>> > To unsubscribe from this group and stop receiving emails from it, send an email to sage-devel+...@googlegroups.com.
>> > To view this discussion visit https://groups.google.com/d/msgid/sage-devel/CAL2Ch8Yd42K%2B%2B9y3_S10g%3D93fa_BUHU5pp%3DKQWobHYKB%2BAPkaA%40mail.gmail.com.

[Dima Pasechnik]

Hi,
yes, I can reproduce this problem with a fresh Conda. That is, our instructions
https://doc.sagemath.org/html/en/installation/conda.html#using-conda-to-provide-all-dependencies-for-the-sage-library
to build Sage 10.6.on Apple arm64 (M1/2/3/4) using Conda are not working.
That's, well, a bit embarrassing.

Errors/warings (in pynac/ginac module, of course :-)) look like

> > ld: warning: direct access in function 'GiNaC::function::accept(GiNaC::visitor&) const' from file 'build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/function.o' to global weak symbol 'typeinfo for GiNaC::container<std::__1::vector>::visitor' from file 'build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/templates.o' means the weak symbol cannot be overridden at runtime. This was likely caused by different translation units being compiled with different visibility settings.

Dima


On Tue, Apr 1, 2025 at 1:50 PM Dima Pasechnik <dim...@gmail.com> wrote:
>
> Once again, what Sage version are you using? 10.6 was just released
> (it's basically the same as 10.6.rc1)
> Let me try this
> (https://doc.sagemath.org/html/en/installation/conda.html#using-conda-to-provide-all-dependencies-for-the-sage-library)
> with Conda on an Apple M1 machine, and see if it works for me.
>
> You're probably mixing Conda's and Apple's toolchains, and/or have
> uncleared from previous tries parts of the (non-Conda) build mixing
> in.
>
>
> On Tue, Apr 1, 2025 at 12:16 PM Vishal Shahi 4-Yr B.Tech.: Electronics
> Engg., IIT(BHU) <vishal.sh...@iitbhu.ac.in> wrote:
> >
> > Hello Dima,
> > Again thanks for actively replying and i tried to build again but it still it gave errors so i tried to do it with miniforge
> > everything went fine but during the run of this
> > ```
> > pip install --no-build-isolation --config-settings editable_mode=compat -v -v --editable ./src
> > ```
> > i get the error below please help me to build sage (really tired of getting errors)
> >
> > vishalshahi/miniforge3/envs/sage-dev/include/ -I/Users/vishalshahi/miniforge3/envs/sage-dev/include -I/Users/vishalshahi/miniforge3/envs/sage-dev/include/ -I/Users/vishalshahi/miniforge3/envs/sage-dev/include -Isage/symbolic -Isage/cpython -I/Users/vishalshahi/miniforge3/envs/sage-dev/lib/python3.12/site-packages/cysignals -I/Users/vishalshahi/miniforge3/envs/sage-dev/include -Isage/ext -I/Users/vishalshahi/Desktop/sage/src -I/Users/vishalshahi/miniforge3/envs/sage-dev/lib/python3.12/site-packages/numpy/_core/include -I/Users/vishalshahi/miniforge3/envs/sage-dev/include/python3.12 -I/Users/vishalshahi/miniforge3/envs/sage-dev/include/python3.12 -c sage/symbolic/ginac/useries.cpp -o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/useries.o -std=c++11 -DSING_NDEBUG -DOM_NDEBUG -DSING_NDEBUG -DOM_NDEBUG -DSING_NDEBUG -DOM_NDEBUG -DSING_NDEBUG -DOM_NDEBUG -I/Users/vishalshahi/miniforge3/envs/sage-dev/include -I/Users/vishalshahi/miniforge3/envs/sage-dev/include/singular -I/Users/vishalshahi/miniforge3/envs/sage-dev/include -I/Users/vishalshahi/miniforge3/envs/sage-dev/include/singular -I/Users/vishalshahi/miniforge3/envs/sage-dev/include/ -I/Users/vishalshahi/miniforge3/envs/sage-dev/include -I/Users/vishalshahi/miniforge3/envs/sage-dev/include/ -I/Users/vishalshahi/miniforge3/envs/sage-dev/include
> >
> > arm64-apple-darwin20.0.0-clang++ -ftree-vectorize -fPIC -fstack-protector-strong -O2 -pipe -stdlib=libc++ -fvisibility-inlines-hidden -fmessage-length=0 -isystem /Users/vishalshahi/miniforge3/envs/sage-dev/include -D_FORTIFY_SOURCE=2 -isystem /Users/vishalshahi/miniforge3/envs/sage-dev/include -I/Users/vishalshahi/miniforge3/envs/sage-dev/include -I/Users/vishalshahi/miniforge3/envs/sage-dev/include/singular -I/Users/vishalshahi/miniforge3/envs/sage-dev/include -I/Users/vishalshahi/miniforge3/envs/sage-dev/include/singular -I/Users/vishalshahi/miniforge3/envs/sage-dev/include/ -I/Users/vishalshahi/miniforge3/envs/sage-dev/include -I/Users/vishalshahi/miniforge3/envs/sage-dev/include/ -I/Users/vishalshahi/miniforge3/envs/sage-dev/include -Isage/symbolic -Isage/cpython -I/Users/vishalshahi/miniforge3/envs/sage-dev/lib/python3.12/site-packages/cysignals -I/Users/vishalshahi/miniforge3/envs/sage-dev/include -Isage/ext -I/Users/vishalshahi/Desktop/sage/src -I/Users/vishalshahi/miniforge3/envs/sage-dev/lib/python3.12/site-packages/numpy/_core/include -I/Users/vishalshahi/miniforge3/envs/sage-dev/include/python3.12 -I/Users/vishalshahi/miniforge3/envs/sage-dev/include/python3.12 -c sage/symbolic/ginac/utils.cpp -o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/utils.o -std=c++11 -DSING_NDEBUG -DOM_NDEBUG -DSING_NDEBUG -DOM_NDEBUG -DSING_NDEBUG -DOM_NDEBUG -DSING_NDEBUG -DOM_NDEBUG -I/Users/vishalshahi/miniforge3/envs/sage-dev/include -I/Users/vishalshahi/miniforge3/envs/sage-dev/include/singular -I/Users/vishalshahi/miniforge3/envs/sage-dev/include -I/Users/vishalshahi/miniforge3/envs/sage-dev/include/singular -I/Users/vishalshahi/miniforge3/envs/sage-dev/include/ -I/Users/vishalshahi/miniforge3/envs/sage-dev/include -I/Users/vishalshahi/miniforge3/envs/sage-dev/include/ -I/Users/vishalshahi/miniforge3/envs/sage-dev/include
> >
> > arm64-apple-darwin20.0.0-clang++ -ftree-vectorize -fPIC -fstack-protector-strong -O2 -pipe -stdlib=libc++ -fvisibility-inlines-hidden -fmessage-length=0 -isystem /Users/vishalshahi/miniforge3/envs/sage-dev/include -D_FORTIFY_SOURCE=2 -isystem /Users/vishalshahi/miniforge3/envs/sage-dev/include -I/Users/vishalshahi/miniforge3/envs/sage-dev/include -I/Users/vishalshahi/miniforge3/envs/sage-dev/include/singular -I/Users/vishalshahi/miniforge3/envs/sage-dev/include -I/Users/vishalshahi/miniforge3/envs/sage-dev/include/singular -I/Users/vishalshahi/miniforge3/envs/sage-dev/include/ -I/Users/vishalshahi/miniforge3/envs/sage-dev/include -I/Users/vishalshahi/miniforge3/envs/sage-dev/include/ -I/Users/vishalshahi/miniforge3/envs/sage-dev/include -Isage/symbolic -Isage/cpython -I/Users/vishalshahi/miniforge3/envs/sage-dev/lib/python3.12/site-packages/cysignals -I/Users/vishalshahi/miniforge3/envs/sage-dev/include -Isage/ext -I/Users/vishalshahi/Desktop/sage/src -I/Users/vishalshahi/miniforge3/envs/sage-dev/lib/python3.12/site-packages/numpy/_core/include -I/Users/vishalshahi/miniforge3/envs/sage-dev/include/python3.12 -I/Users/vishalshahi/miniforge3/envs/sage-dev/include/python3.12 -c sage/symbolic/ginac/wildcard.cpp -o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/wildcard.o -std=c++11 -DSING_NDEBUG -DOM_NDEBUG -DSING_NDEBUG -DOM_NDEBUG -DSING_NDEBUG -DOM_NDEBUG -DSING_NDEBUG -DOM_NDEBUG -I/Users/vishalshahi/miniforge3/envs/sage-dev/include -I/Users/vishalshahi/miniforge3/envs/sage-dev/include/singular -I/Users/vishalshahi/miniforge3/envs/sage-dev/include -I/Users/vishalshahi/miniforge3/envs/sage-dev/include/singular -I/Users/vishalshahi/miniforge3/envs/sage-dev/include/ -I/Users/vishalshahi/miniforge3/envs/sage-dev/include -I/Users/vishalshahi/miniforge3/envs/sage-dev/include/ -I/Users/vishalshahi/miniforge3/envs/sage-dev/include
> >
> > arm64-apple-darwin20.0.0-clang++ -ftree-vectorize -fPIC -fstack-protector-strong -O2 -pipe -stdlib=libc++ -fvisibility-inlines-hidden -fmessage-length=0 -isystem /Users/vishalshahi/miniforge3/envs/sage-dev/include -D_FORTIFY_SOURCE=2 -isystem /Users/vishalshahi/miniforge3/envs/sage-dev/include -bundle -undefined dynamic_lookup -Wl,-rpath,/Users/vishalshahi/miniforge3/envs/sage-dev/lib -L/Users/vishalshahi/miniforge3/envs/sage-dev/lib -Wl,-rpath,/Users/vishalshahi/miniforge3/envs/sage-dev/lib -L/Users/vishalshahi/miniforge3/envs/sage-dev/lib -Wl,-headerpad_max_install_names -Wl,-dead_strip_dylibs -Wl,-rpath,/Users/vishalshahi/miniforge3/envs/sage-dev/lib -L/Users/vishalshahi/miniforge3/envs/sage-dev/lib -ftree-vectorize -fPIC -fstack-protector-strong -O2 -pipe -stdlib=libc++ -fvisibility-inlines-hidden -fmessage-length=0 -isystem /Users/vishalshahi/miniforge3/envs/sage-dev/include -D_FORTIFY_SOURCE=2 -isystem /Users/vishalshahi/miniforge3/envs/sage-dev/include build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/expression.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/add.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/archive.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/assume.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/basic.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/cmatcher.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/constant.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/context.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/ex.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/expair.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/expairseq.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/exprseq.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/fderivative.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/function.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/function_info.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/infinity.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/infoflagbase.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/inifcns.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/inifcns_comb.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/inifcns_gamma.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/inifcns_hyperb.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/inifcns_hyperg.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/inifcns_nstdsums.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/inifcns_orthopoly.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/inifcns_trans.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/inifcns_trig.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/inifcns_zeta.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/lst.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/matrix.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/mpoly-ginac.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/mpoly-singular.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/mpoly.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/mul.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/normal.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/numeric.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/operators.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/order.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/power.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/print.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/pseries.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/py_funcs.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/registrar.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/relational.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/remember.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/sum.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/symbol.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/templates.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/upoly-ginac.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/useries.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/utils.o build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/wildcard.o -L/Users/vishalshahi/miniforge3/envs/sage-dev/lib -lflint -lgmp -lSingular -lpolys -lflint -lmpfr -lgmp -lgmp -lfactory -lflint -lmpfr -lgmp -lntl -lgmp -lomalloc -lsingular_resources -lgsl -lgslcblas -lcblas -lm -o build/lib.macosx-11.0-arm64-cpython-312/sage/symbolic/expression.cpython-312-darwin.so
> >
> > ld: warning: direct access in function 'GiNaC::print_memfun_handler<GiNaC::container<std::__1::vector>, GiNaC::print_context>::operator()(GiNaC::basic const&, GiNaC::print_context const&, unsigned int) const' from file 'build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/exprseq.o' to global weak symbol 'typeinfo for GiNaC::container<std::__1::vector>' from file 'build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/templates.o' means the weak symbol cannot be overridden at runtime. This was likely caused by different translation units being compiled with different visibility settings.
> >
> > ld: warning: direct access in function 'GiNaC::print_memfun_handler<GiNaC::container<std::__1::vector>, GiNaC::print_context>::operator()(GiNaC::basic const&, GiNaC::print_context const&, unsigned int) const' from file 'build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/exprseq.o' to global weak symbol 'typeinfo for GiNaC::container<std::__1::vector>' from file 'build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/templates.o' means the weak symbol cannot be overridden at runtime. This was likely caused by different translation units being compiled with different visibility settings.
> >
> > ld: warning: direct access in function 'GiNaC::print_memfun_handler<GiNaC::container<std::__1::vector>, GiNaC::print_tree>::operator()(GiNaC::basic const&, GiNaC::print_context const&, unsigned int) const' from file 'build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/exprseq.o' to global weak symbol 'typeinfo for GiNaC::container<std::__1::vector>' from file 'build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/templates.o' means the weak symbol cannot be overridden at runtime. This was likely caused by different translation units being compiled with different visibility settings.
> >
> > ld: warning: direct access in function 'GiNaC::print_memfun_handler<GiNaC::container<std::__1::vector>, GiNaC::print_tree>::operator()(GiNaC::basic const&, GiNaC::print_context const&, unsigned int) const' from file 'build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/exprseq.o' to global weak symbol 'typeinfo for GiNaC::container<std::__1::vector>' from file 'build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/templates.o' means the weak symbol cannot be overridden at runtime. This was likely caused by different translation units being compiled with different visibility settings.
> >
> > ld: warning: direct access in function 'GiNaC::fderivative::accept(GiNaC::visitor&) const' from file 'build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/fderivative.o' to global weak symbol 'typeinfo for GiNaC::container<std::__1::vector>::visitor' from file 'build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/templates.o' means the weak symbol cannot be overridden at runtime. This was likely caused by different translation units being compiled with different visibility settings.
> >
> > ld: warning: direct access in function 'GiNaC::fderivative::accept(GiNaC::visitor&) const' from file 'build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/fderivative.o' to global weak symbol 'typeinfo for GiNaC::container<std::__1::vector>::visitor' from file 'build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/templates.o' means the weak symbol cannot be overridden at runtime. This was likely caused by different translation units being compiled with different visibility settings.
> >
> > ld: warning: direct access in function 'GiNaC::function::accept(GiNaC::visitor&) const' from file 'build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/function.o' to global weak symbol 'typeinfo for GiNaC::container<std::__1::vector>::visitor' from file 'build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/templates.o' means the weak symbol cannot be overridden at runtime. This was likely caused by different translation units being compiled with different visibility settings.
> >
> > ld: warning: direct access in function 'GiNaC::function::accept(GiNaC::visitor&) const' from file 'build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/function.o' to global weak symbol 'typeinfo for GiNaC::container<std::__1::vector>::visitor' from file 'build/temp.macosx-11.0-arm64-cpython-312/sage/symbolic/ginac/templates.o' means the weak symbol cannot be overridden at runtime. This was likely caused by different translation units being compiled with different visibility settings.
> >
> > error: command '/Users/vishalshahi/miniforge3/envs/sage-dev/bin/arm64-apple-darwin20.0.0-clang++' failed with exit code 1
> >
> > error: subprocess-exited-with-error
> >
> >
> >
> > × Building wheel for sagemath-standard (pyproject.toml) did not run successfully.
> >
> > │ exit code: 1
> >
> > ╰─> See above for output.
> >
> >
> >
> > note: This error originates from a subprocess, and is likely not a problem with pip.
> >
> > full command: /Users/vishalshahi/miniforge3/envs/sage-dev/bin/python3.12 /Users/vishalshahi/miniforge3/envs/sage-dev/lib/python3.12/site-packages/pip/_vendor/pyproject_hooks/_in_process/_in_process.py build_wheel /var/folders/t6/53kf0yyn4kj4fy479c11gtv40000gn/T/tmpvwfq4r_u
> >
> > cwd: /Users/vishalshahi/Desktop/sage/src
> >
> > Building wheel for sagemath-standard (pyproject.toml) ... error
> >
> > ERROR: Failed building wheel for sagemath-standard
> >
> > Failed to build sagemath-standard
> >
> > Remote version of pip: 25.0.1
> >
> > Local version of pip: 25.0.1
> >
> > Was pip installed by pip? False
> >
> > ERROR: Failed to build installable wheels for some pyproject.toml based projects (sagemath-standard)
> >
> > Exception information:

> >
> > Traceback (most recent call last):
> >

> > File "/Users/vishalshahi/miniforge3/envs/sage-dev/lib/python3.12/site-packages/pip/_internal/cli/base_command.py", line 106, in _run_wrapper
> >
> > status = _inner_run()
> >
> > ^^^^^^^^^^^^
> >
> > File "/Users/vishalshahi/miniforge3/envs/sage-dev/lib/python3.12/site-packages/pip/_internal/cli/base_command.py", line 97, in _inner_run
> >
> > return self.run(options, args)
> >
> > ^^^^^^^^^^^^^^^^^^^^^^^
> >
> > File "/Users/vishalshahi/miniforge3/envs/sage-dev/lib/python3.12/site-packages/pip/_internal/cli/req_command.py", line 67, in wrapper
> >
> > return func(self, options, args)
> >
> > ^^^^^^^^^^^^^^^^^^^^^^^^^
> >
> > File "/Users/vishalshahi/miniforge3/envs/sage-dev/lib/python3.12/site-packages/pip/_internal/commands/install.py", line 435, in run
> >
> > raise InstallationError(
> >
> > pip._internal.exceptions.InstallationError: Failed to build installable wheels for some pyproject.toml based projects (sagemath-standard)
> >
> > Removed build tracker: '/private/var/folders/t6/53kf0yyn4kj4fy479c11gtv40000gn/T/pip-build-tracker-2p7jes7z'
> >
> > (sage-dev) vishalshahi@Vishals-MacBook-Air-2 sage %
> >

[Dima Pasechnik]

The fix which works for me is here:
https://github.com/sagemath/sage/pull/39850

It's in fact a missing static_cast in Boost interface. As conda is
using clang 18, it's extra sensitive to this sort of
type mis-casts; so one needs

--- a/src/sage/graphs/base/boost_interface.cpp
+++ b/src/sage/graphs/base/boost_interface.cpp
@@ -116,7 +116,7 @@ public:
std::vector<std::pair<v_index, std::pair<v_index, double>>> to_return;
typename boost::graph_traits<adjacency_list>::edge_iterator ei, ei_end;
for (boost::tie(ei, ei_end) = boost::edges(graph); ei !=
ei_end; ++ei) {
- to_return.push_back({index[boost::source(*ei, graph)],
+ to_return.push_back({static_cast<int>(index[boost::source(*ei,
graph)]),
{index[boost::target(*ei, graph)],
get(boost::edge_weight, graph, *ei)}});
}
l