new buide device, display acts strange

[NoXorius]

Hi Safecast owners.

I'm a new safecast owner and i soldered the device 2 days ago.

unlucky my device display acts strange.

The display seems to have troubles to show inverted text. (normal one seems to be ok)

Here some images:

1) the Safecast boot picture. NOT OK

2) the status (firmware, battery ... ) is OK

3) first running Status ( time 00:00:00) NOT OK

4) running status ( time 45s no inverted text on the display) OK

what i have done to resolve this:

 resolder display pins, checked layout twice, updated firmware (now latest)

Everything else works as wished.

Did someone else has already seen this issue? 

should i resolder some pins? (which one)

Best Chris

[Rob Oudendijk]

Chris,

Seems to me a broken display. Did you by accident when fastening the nuts on the top touched/moved,with the tool you used, the glass? 

regards

rob

[NoXorius]

Hi

I was very carful, the protective film is still on the display and i used my fingers to close the nuts.

Best Chris

[Tara Tiger Brown]

Hi Chris - 

I made a note to ship you a new display.

-Tara, KitHub

[Alberto Villa]

An unimportant detail: the red and blue LEDs have been reversed.

Alberto

[Aaron Hoel]

Another unrelated post...your 90 degree header pin set does not seem to be properly soldered.  Important, as far as I understand, for proper firmware upgrades.