Unhappy bGeigie Nano

[Louis Bertrand]

Hello,

bGeigie Nano #3209 won't boot up and at first glance it looks like the USB +5V pin on the Arduino FIO isn't coming up to the full 5V. I suspect the 3.3V regulator and LiPo charger IC. I disconnected the battery and removed the bGeigieCast module to lighten the load. Even then, the USB 5V pin sits somewhere around 3.4V.

Before I go all out and replace the FIO, does anyone have any hints as to what to look for next?

Thanks

 --Louis

[Louis Bertrand]

Oh never mind... It was the cable. The observations were the same on my own Nano with the same cable. 

Best,

 --Louis

[Rob Oudendijk]

Louis,

Good you found it!!

Rob

Regards,

Rob Oudendijk Yuka Hayashi

https://yr-design.biz   https://about.me/robouden

tel +81 80-22605966  Skype: robouden Linkedin:robouden  

--
You received this message because you are subscribed to the Google Groups "Safecast Device Discussions and Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to safecast-devic...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/safecast-devices/ff4f5193-fccf-4b5f-99c5-f21a13df8f73n%40googlegroups.com.