Skip to first unread message
L Desu
Dec 18, 2014, 7:11:50 AM12/18/14
to safecast...@googlegroups.com
The piezo in my onyx burn out about a year ago. I'm trying to find some specs on it but it doesn't have any markings on the case of the smt buzzer in the onyx. Can someone tell me the part number or voltage the onyx uses to drive this buzzer so I can replace it?
Thanks
Nava Whiteford
Dec 19, 2014, 3:09:24 AM12/19/14
to L Desu, safecast...@googlegroups.com
I believe this is the part:
http://www.mouser.jp/ProductDetail/Murata-Electronics/PKLCS1212E4001-R1/?qs=obr%252boSDNKM%252btd7GB2KoUgw%3D%3D
From: http://www.bunniestudios.com/blog/?p=2218
Which was kept up to date during the development process and I believe is current.
I'd also recommend contacting Medcom as they should replace it under warranty. I'd also recommend updating to the latest version of the firmware, very old versions had a drive frequency that was non-optimal, so it might be a good idea to check this first.
http://www.mouser.jp/ProductDetail/Murata-Electronics/PKLCS1212E4001-R1/?qs=obr%252boSDNKM%252btd7GB2KoUgw%3D%3D
From: http://www.bunniestudios.com/blog/?p=2218
Which was kept up to date during the development process and I believe is current.
I'd also recommend contacting Medcom as they should replace it under warranty. I'd also recommend updating to the latest version of the firmware, very old versions had a drive frequency that was non-optimal, so it might be a good idea to check this first.
Reply all
Reply to author
Forward
0 new messages