Installing Sanp4Arduino in Raspberry Pi 3

[pedro.est...@gmail.com]

Hi,

I'm starting now with Raspberry, Arduino and Snap4Arduino. I have already test Snap and Snap4Arduino in windows, but I found a problem installing the software (Snap4Arduino) in Raspberry Pi 3.

I have try several times with no sucess. Most common error shown is:

Didn't find libudev.so.1 or libudev.so.0. Please provide a link.

I have looked for postinstall.sh with no success (I don't know where is it). 

Could you help me to know what is happening or what I'm doing wrong?

Thank you in advance.

[Bernat Romagosa]

Hi there Pedro,

you can't install the regular Snap4Arduino version in a Raspberry, because although it's also a GNU/Linux system, it uses a different architecture (ARM).

So, your options are:

a) Develop in PC, deploy in Raspberry by using the Snap4Arduino command line interpreter

b) Wait for the browser plugin version to be released, which should happen around next week

c) For the moment, try out the old experimental Chromebook version that can also be installed in the Raspberry if you install the Chromium browser first.

Hope it helped!

Cheers,

Bernat.

--
You received this message because you are subscribed to the Google Groups "S4A Community Mail List" group.
To unsubscribe from this group and stop receiving emails from it, send an email to s4a-communit...@googlegroups.com.
To post to this group, send email to s4a-co...@googlegroups.com.
Visit this group at https://groups.google.com/group/s4a-community.
To view this discussion on the web visit https://groups.google.com/d/msgid/s4a-community/9ae4af2f-9bf2-4239-9859-9911c9d3274f%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--

Bernat Romagosa

[pedro.est...@gmail.com]

Thank you very much Bernat!!

I will try (at least the first one) and back with my experience.

(sorry for delay, but I was travelling)