List of papers by Dr. T.G. Wilson, Jr.

[斑竹]

1.  Life after the schematic: the impact of circuit operation on the physical realization of electronic power supplies
Wilson, T.G., Jr.;
Proceedings of the IEEE
Volume 76,  Issue 4,  April 1988 Page(s):325 - 334
Digital Object Identifier 10.1109/5.4419

Summary: The impact of the nonlinear analog operation of power electronic circuits on the physical realization process is considered. Portions of the physical realization process of a switched-mode power supply are compared with those of a digital circuit boa.....
 
 AbstractPlus | Full Text: PDF(1024 KB)    IEEE JNL
 
 
 
 
  2.  Electrical design inspection: a methodology for using circuit simulation in the design and development of electronic power supplies
Lee, E.S.; Wilson, T.G., Jr.;
Power Electronics, IEEE Transactions on
Volume 8,  Issue 4,  Oct. 1993 Page(s):475 - 485
Digital Object Identifier 10.1109/63.261018

Summary: The authors present an electrical design inspection (EDI) methodology that combines advanced power circuit simulation techniques and RISC (reduced instruction set computing) workstation hardware to use simulation in the day-to-day design of electroni.....
 
 AbstractPlus | Full Text: PDF(896 KB)    IEEE JNL
 
 
 
 
  3.  Coupling of magnetic design choices to DC-to-DC converter electrical performance
Wilson, T.G., Jr.; Wilson, T.G.; Owen, H.A., Jr.;
Power Electronics, IEEE Transactions on
Volume 13,  Issue 1,  Jan. 1998 Page(s):3 - 11
Digital Object Identifier 10.1109/63.654954

Summary: The design of an energy-storage reactor in a large measure determines the performance of most high-efficiency switched-mode DC-to-DC power converters. No other component has such a dramatic effect on the circuit waveforms and the distribution of circ.....
 
 AbstractPlus | References | Full Text: PDF(304 KB)    IEEE JNL
 
 
 
 
  4.  Design verification and testing of power supply system by using virtual prototype
Li, Q.M.; Lee, F.C.; Wilson, T.G., Jr.;
Power Electronics, IEEE Transactions on
Volume 18,  Issue 3,  May 2003 Page(s):733 - 739
Digital Object Identifier 10.1109/TPEL.2003.810845

Summary: This paper proposes a simulation approach to verify and test power supply system by using a virtual prototype before the hardware prototyping in a single simulation environment. By applying the proposed methodology, the designer can use the virtual p.....
 
 AbstractPlus | References | Full Text: PDF(879 KB)    IEEE JNL
 
 
 
 
  5.  Quality assurance verification using a virtual prototyping system
Laurence McGarry; Kitty Ying Qu; William Lee; Wilson, T.G., Jr.;
Applied Power Electronics Conference and Exposition, 2005. APEC 2005. Twentieth Annual IEEE
Volume 2,  6-10 March 2005 Page(s):1325 - 1331 Vol. 2

Summary: The concept of a virtual prototyping system using simulation and IP blocks has been outlined. This paper discusses an extension of the virtual prototyping simulation system by applying those tools and techniques to simulate many of the parameters req.....
 
 AbstractPlus | Full Text: PDF(420 KB)    IEEE CNF
 
 
 
 
  6.  A virtual prototyping process for power supplies using an electronic design verification testing (eDVT) system
Laurence McGarry; Kitty Ying Qu; William Lee; Wilson, T.G., Jr.;
Power Electronics and Motion Control Conference, 2004. IPEMC 2004. The 4th International
Volume 3,  14-16 Aug. 2004 Page(s):1689 - 1694 Vol.3

Summary: This paper describes an innovative electronic design verification test (eDVT) system capable of using automated circuit simulation to emulate the complete final test performance of a production power supply design. The Web-based eDVT system facilitat.....
 
 AbstractPlus | Full Text: PDF(770 KB)    IEEE CNF
 
 
 
 
  7.  A method for inductor core loss estimation in power factor correction applications
Jinjun Liu; Wilson, T.G., Jr.; Wong, R.C.; Wunderlich, R.; Lee, F.C.;
Applied Power Electronics Conference and Exposition, 2002. APEC 2002. Seventeenth Annual IEEE
Volume 1,  10-14 March 2002 Page(s):439 - 445 vol.1
Digital Object Identifier 10.1109/APEC.2002.989282

Summary: Conventional core loss estimation methods exhibit limitations in dealing with important aspects of switching power converter applications such as different duty cycles, discontinuous-conduction-mode, variable switching frequency, or variable duty cyc.....
 
 AbstractPlus | Full Text: PDF(444 KB)    IEEE CNF
 
 
 
 
  8.  Design verification and testing of power supply system by using virtual prototype
Li, Q.; Lee, F.C.; Wilson, T.G., Jr.;
Applied Power Electronics Conference and Exposition, 2000. APEC 2000. Fifteenth Annual IEEE
Volume 2,  6-10 Feb. 2000 Page(s):852 - 858 vol.2
Digital Object Identifier 10.1109/APEC.2000.822604

Summary: This paper proposes a simulation approach to verify and test a power supply system by using a virtual prototype before the hardware prototyping. By applying the proposed methodology, the designer can use the virtual prototype effectively by keeping a.....
 
 AbstractPlus | Full Text: PDF(612 KB)    IEEE CNF
 
 
 
 
  9.  Using simulation for design verification of bias power supply and its interactions in a multiple-converter system
Qiong Li; Lee, F.C.; Wilson, T.G., Jr.; Qunn, C.A.;
Applied Power Electronics Conference and Exposition, 1999. APEC '99. Fourteenth Annual
Volume 1,  14-18 March 1999 Page(s):184 - 190 vol.1
Digital Object Identifier 10.1109/APEC.1999.749508

Summary: This paper demonstrates a simulation procedure that can be used to verify both the component and the system level performance of a complex power supply design. The design verification of a bias power supply and its interactions in a multiple-converte.....
 
 AbstractPlus | Full Text: PDF(544 KB)    IEEE CNF
 
 
 
 
  10.  Managing project risk and the performance envelope
Miles, F.M.; Wilson, T.G., Jr.;
Applied Power Electronics Conference and Exposition, 1998. APEC '98. Conference Proceedings 1998., Thirteenth Annual
Volume 1,  15-19 Feb. 1998 Page(s):247 - 253 vol.1
Digital Object Identifier 10.1109/APEC.1998.647698

Summary: This paper explores risk management in the development of a power subsystem given the need to push the performance envelope. It examines a team approach to risk management wherein various risk elements are identified early, evaluated objectively, and.....
 
 AbstractPlus | Full Text: PDF(656 KB)    IEEE CNF
 
 
 
 
  11.  Use of simulation to understand and predict switching losses in a two-stage power factor corrected AC-to-DC converter
Waite, J.; Wilson, T.G., Jr.;
Applied Power Electronics Conference and Exposition, 1996. APEC '96. Conference Proceedings 1996., Eleventh Annual
Volume 1,  3-7 March 1996 Page(s):88 - 95 vol.1
Digital Object Identifier 10.1109/APEC.1996.500427

Summary: This paper describes how a piecewise linear circuit simulation model for the switching power MOSFET is used to understand and predict the switching losses in a two transistor forward converter and power factor corrected boost converter. Predicted los.....
 
 AbstractPlus | Full Text: PDF(680 KB)    IEEE CNF
 
 
 
 
  12.  Effects of parameter variation on energy-storage reactor design and DC-to-DC converter performance
Wilson, T.G., Jr; Wilson, T.G.; Owen, H.A., Jr;
Applied Power Electronics Conference and Exposition, 1995. APEC '95. Conference Proceedings 1995., Tenth Annual
Issue 0,  Part 2,  5-9 March 1995 Page(s):540 - 546 vol.2
Digital Object Identifier 10.1109/APEC.1995.469074

Summary: Designers must be able to understand the impact of parameter variation on the design of the energy-storage reactor and on the overall DC-to-DC converter performance. This paper shows how the design space of reactor turns and relative permeability can.....
 
 AbstractPlus | Full Text: PDF(500 KB)    IEEE CNF
 
 
 
 
  13.  Electrical design inspection: A methodology for using circuit simulation in the design and development of electronic power supplies
Lee, E.S.; Wilson, T.G., Jr.;
Power Electronics Specialists Conference, 1992. PESC '92 Record., 23rd Annual IEEE
29 June-3 July 1992 Page(s):34 - 45 vol.1
Digital Object Identifier 10.1109/PESC.1992.254688

Summary: An electrical design inspection methodology, that combines advanced power circuit simulation techniques and RISC (reduced instruction set computing) workstation hardware in the day-to-day design of electronic power supplies is presented. This methodo.....
 
 AbstractPlus | Full Text: PDF(892 KB)    IEEE CNF
 
 
 
 
  14.  Electrical design inspection of electronic power supplies via time-domain circuit simulation
Lee, E.S.; Wilson, T.G., Jr.;
Computers in Power Electronics, 1992., IEEE Workshop on
9-11 Aug. 1992 Page(s):29 - 43
Digital Object Identifier 10.1109/CIPE.1992.247295

Summary: In the 1992 Power Electronics Specialists Conference, the authors presented electrical design inspection (EDI) as a methodology for using circuit simulation in the design and development of electronic power supplies. This presentation in the 3rd IEEE.....
 
 AbstractPlus | Full Text: PDF(664 KB)    IEEE CNF
 
 
 
 
  15.  Coupling of magnetic design choices to DC-to-DC converter electrical performance
Wilson, T.G., Jr.; Wilson, T.G.; Owen, H.A., Jr.;
Applied Power Electronics Conference and Exposition, 1994. APEC '94. Conference Proceedings 1994., Ninth Annual
13-17 Feb. 1994 Page(s):340 - 347 vol.1
Digital Object Identifier 10.1109/APEC.1994.316379

Summary: The design of an energy storage reactor in large measure determines the performance of most high-efficiency switched-mode DC-to-DC power converters. No other component has such a dramatic effect on the circuit waveforms and the distribution of circui.....
 
 AbstractPlus | Full Text: PDF(516 KB)    IEEE CNF
 

---

DO YOU YAHOO!?
雅虎免费G邮箱－中国第一绝无垃圾邮件骚扰超大邮箱