Bosch Kts 520 Drivers

0 views

Skip to first unread message

Message has been deleted

Lora Ceasor

unread,

Jul 11, 2024, 7:31:17 AM7/11/24

to ruppeimatge

Bosch KTS 520 Drivers: How to Install and Update Them

The Bosch KTS 520 is a diagnostic tool that can communicate with various vehicle control units via USB or serial port. It can perform functions such as reading and clearing fault codes, displaying live data, performing actuator tests, and programming modules. However, to use the KTS 520 effectively, you need to install and update the drivers that allow it to communicate with your computer and the vehicle.

How to Install Bosch KTS 520 Drivers

To install the Bosch KTS 520 drivers, you need to follow these steps:

bosch kts 520 drivers

Download Zip https://psfmi.com/2z0PLd

Connect the KTS 520 to your computer via USB or serial port.

Power on the KTS 520 by connecting it to the vehicle's OBD port or an external power supply. You should hear the relays clicking and see the green LED flashing.

If you are using Windows, your computer should automatically detect the KTS 520 and install the drivers. If not, you can manually install them from the CD that came with the device or download them from [Bosch's website].

If you are using Linux or Mac OS, you may need to install additional drivers for the CP2101 USB to UART bridge controller that handles the communication between the KTS 520 and your computer. You can find these drivers on [Silicon Labs' website].

After installing the drivers, you can use the Bosch DDC software to test and configure the KTS 520. You can also use other software that supports the PassThru protocol, such as ODIS, ISTA, or Techstream.

How to Update Bosch KTS 520 Drivers

To update the Bosch KTS 520 drivers, you need to follow these steps:

Connect the KTS 520 to your computer via USB or serial port.

Power on the KTS 520 by connecting it to the vehicle's OBD port or an external power supply.

Run the RBPLFWconfig.exe utility that is located in C:\Bosch_PR\FwUpdate folder. This utility will check the firmware version of your KTS 520 and update it if necessary.

If you are using Windows, you may also need to update the drivers for the CP2101 USB to UART bridge controller. You can do this by using the Device Manager or downloading them from [Silicon Labs' website].

If you are using Linux or Mac OS, you may also need to update the drivers for the CP2101 USB to UART bridge controller. You can do this by following the instructions on [Silicon Labs' website].

After updating the drivers, you can use the Bosch DDC software to test and configure the KTS 520. You can also use other software that supports the PassThru protocol, such as ODIS, ISTA, or Techstream.

Conclusion

The Bosch KTS 520 is a powerful diagnostic tool that can communicate with various vehicle control units via USB or serial port. However, to use it effectively, you need to install and update the drivers that allow it to communicate with your computer and the vehicle. By following the steps above, you can easily install and update the Bosch KTS 520 drivers and enjoy its features.