Bridge Mode...

[timb...@gmail.com]

Once you have a device in bridge mode you will be getting an IP address
from the Access Point that the bridge is connecting to. If you want to
get to the management web page for the device you will have to
statically assign an IP address to the LAN port on your computer where
the bridge connects. I would personally use the IP address below for
the MM2211:

IP: 192.168.0.2
Subnet: 255.255.255.0

Once the changes have applied you will loose internet connectivity, but
you will be able to open you web browser and go to the bridges IP
address ( 192.168.0.254 ).

[Eric (Ruckus)]

Timbuckto,

We do MAC cloning in bridge mode so the device assumes the MAC of the
connected machine, hence you cannot manage the device until you
disconnect the computer.

Thanks!