Fineoffset-WH24 and WH65B receiving data

799 views
Skip to first unread message

Mark Woolridge

unread,
Jan 27, 2022, 3:31:32 PM1/27/22
to rtl_433
I'm using a little RTL-SDR usb on a Pi 3b+ to pickup data from my Ambient WS2000 as well as my power meter and water meter.   The weather station is picked up as WH24 or WH65B pending the startup setting I use. 

when using :
rtl_433 -C customary -f 915M

I pickup the weather station WH24, the WH32B indoor sensor and the power meter and water meter but the WH65B console doesn't show.  The below is the feedback for rtl_433 with the above command.
Registered 179 out of 210 device decoding protocols [ 1-4 8 11-12 15-17 19-23 25          -26 29-36 38-60 63 67-71 73-100 102-105 108-116 119 121 124-128 130-149 151-161           163-168 170-175 177-197 199 201-210 ]

Detached kernel driver

Found Rafael Micro R820T tuner

Exact sample rate is: 1000000.026491 Hz

[R82XX] PLL not locked!

Sample rate set to 1000000 S/s.

Tuner gain set to Auto.

Tuned to 915.000MHz.

baseband_demod_FM: low pass filter for 1000000 Hz at cutoff 200000 Hz, 5.0 us


If I use the command below which changes the sampling rate I pickup the Wh24, WH32B and the WH65B but no other data from power meter or the water meter.   I'm just getting into this so I'm trying to understand the difference in the command and why the WH65B shows up in one but not the other was well as the power/water meters.   Thanks for you insight.

rtl_433 -C customary -f 915M -s250k

Registered 179 out of 210 device decoding protocols [ 1-4 8 11-12 15-17 19-23 25          -26 29-36 38-60 63 67-71 73-100 102-105 108-116 119 121 124-128 130-149 151-161           163-168 170-175 177-197 199 201-210 ]

Detached kernel driver

Found Rafael Micro R820T tuner

Exact sample rate is: 250000.000414 Hz

[R82XX] PLL not locked!

Sample rate set to 250000 S/s.

Tuner gain set to Auto.

Tuned to 915.000MHz.

baseband_demod_FM: low pass filter for 250000 Hz at cutoff 50000 Hz, 20.0 us



Ryan Woodard

unread,
Oct 11, 2022, 4:16:05 PM10/11/22
to rtl_433
Similar wants.  I used this rtl_433 comment as inspiration and made:

```
# https://github.com/merbanan/rtl_433/issues/1396#issuecomment-1002637692

# weather station
#     [78]  Fine Offset Electronics, WH25, WH32B, WH24, WH65B, HP1000 Temperature/Humidity/Pressure Sensor

# electric meter
#    [154]  Standard Consumption Message Plus (SCMplus)

while true; do
  # run for 5 minutes or until a successful event
  rtl_433 -C customary -F syslog:127.0.0.1:1433 -R 154 -f 915M -s 2359296 -E quit -T 300
  # gather data for 1 minute
  rtl_433 -C customary -F syslog:127.0.0.1:1433 -R 78 -f 915M -T 60
done
```
Reply all
Reply to author
Forward
0 new messages