Fine Offset WH1080/WH3080

[Cees Bogaard]

Good day!

I have been struggling with the following "problem" for weeks now and cannot find a solution.
Here is my setup:

Raspberry Pi Zero-W running the latest and fully updated version of Raspbian Stretch
Domoticz v. 38805

RTL-SDR (compiled from source)
rtl_433 installed according to the instructions on the site.

I have an Alecto WS5000-ECO weather station (rebranded WH3080) transmitting on 868.212500 MHz.
Using rtl_433 -f 868212500 -q -F json -R 32 gives me all the output I need.

When I add this setup in Domoticz by creating a RTL433 hardware device with the same parameters (-f 868212500 -q -F json -R 32)
this message shows up in the Domoticz LOG:

2018-01-10 18:32:04.729 Rtl433: Unhandled sensor type, please report: (2018-01-10 18:32:04,Fine Offset Electronics WH3080 Weather Station,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,2,,,,,,,,,OK,0,0.000,0.000,0.000,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
)

This unhandled sensor type contains the data for wind (direction, speed, gust).

Running weewx with user-sdr driver and sending the data to Weather Underground and from Weather Underground with API to Domoticz gives
me a clear reading on all values.
Therefore in my opinion it must be possible to get a correct reading from rtl_433 direct to Domoticz hardware RTL433

Can someone please help me out on this (I want to eliminate the WEEWX - WU step)

Thank you in advance!