rtl_433

Contact owners and managers

1–30 of 739

Welcome to the rtl_433 mailing list.

This list is devoted to the rtl_433 rtlsdr based software created by Benjamin Larsson (merbanan on github).

Currently the software is typically useful for developers who can integrate the software into their own software

(e.g. rtl-wx) or by using filtering scripts that extract the values from the output for further processing by other software.

This group currently focuses on structural improvements for the rtl_433 software.

Bugs and device specific issues are probably best addressed using github issues at https://github.com/merbanan/rtl_433/issues.

0 selected

B Rabbit, … Christian Z.7

Dec 23

Help Please - CAME Garage Door Remote - TOP432

Okay thanks very much for the information everyone. Your help is appreciated. On Monday, 23 December

unread,

Help Please - CAME Garage Door Remote - TOP432

Okay thanks very much for the information everyone. Your help is appreciated. On Monday, 23 December

Dec 23

the_jack_of_all_trades, Christian Z.2

Dec 22

Lacrosse WS6868 Weather Station

We have support for the LaCrosse-BreezePro and LaCrosse-TH2(3) which have a similar protocol. The

unread,

Lacrosse WS6868 Weather Station

We have support for the LaCrosse-BreezePro and LaCrosse-TH2(3) which have a similar protocol. The

Dec 22

Jean-Mikael Tilin

Dec 6

I am looking for the Fitipower FC0013

I am looking for the Fitipower FC0013 key eeprom from Twintech-UT40 or eeprom with the same reference

unread,

I am looking for the Fitipower FC0013

I am looking for the Fitipower FC0013 key eeprom from Twintech-UT40 or eeprom with the same reference

Dec 6

Greg Troxel, Christian Z.5

Nov 27

odd acurite tower transmitter behavior

"Christian Z." <chri...@zuckschwerdt.org> writes: > Close to -0 dB RSSI shows

unread,

odd acurite tower transmitter behavior

"Christian Z." <chri...@zuckschwerdt.org> writes: > Close to -0 dB RSSI shows

Nov 27

Piotrek eF, Christian Z.4

Nov 27

Thermo-Hygrometer station like 30.3054.10 with 3 sensors like 30.3208.02

Great to hear!

unread,

Thermo-Hygrometer station like 30.3054.10 with 3 sensors like 30.3208.02

Great to hear!

Nov 27

Erik Lechak, … Christian Z.6

Nov 18

decoding errors

That's too few bits for sensible messages (eg {1}… is 1 bit ). Also RSSI -30 dB is bad, you

unread,

decoding errors

That's too few bits for sensible messages (eg {1}… is 1 bit ). Also RSSI -30 dB is bad, you

Nov 18

Paul Maine, … Chris Kuethe3

Nov 15

2.4GHz ISM?

``` $ ./rtl_433 -h | grep freq rtl_433 version 24.10-1-gf7c24ae6 branch master at 202410312030 inputs

unread,

2.4GHz ISM?

``` $ ./rtl_433 -h | grep freq rtl_433 version 24.10-1-gf7c24ae6 branch master at 202410312030 inputs

Nov 15

Paul Maine, Christian Z.2

Nov 13

BladRF Failed to set sampling rate

BladeRF2 seems to advertise possible sample rates from 0 to 61440000 Hz https://www.nuand.com/

unread,

BladRF Failed to set sampling rate

BladeRF2 seems to advertise possible sample rates from 0 to 61440000 Hz https://www.nuand.com/

Nov 13

Paul Maine, Christian Z.2

Nov 6

Can I use my Blade RF 2.0 with RTL_433?

Install and test SoapySDR and the https://github.com/pothosware/SoapyBladeRF module. Then install

unread,

Can I use my Blade RF 2.0 with RTL_433?

Install and test SoapySDR and the https://github.com/pothosware/SoapyBladeRF module. Then install

Nov 6

Thomas White, Christian Z.2

Nov 4

ADT alarm system that using door sensor switch DSC EV-DW4927SS.

You can grab some samples, see https://triq.org/rtl_433/ANALYZE.html and document what values should

unread,

ADT alarm system that using door sensor switch DSC EV-DW4927SS.

You can grab some samples, see https://triq.org/rtl_433/ANALYZE.html and document what values should

Nov 4

L Y, … Dave Edenfield6

Oct 31

Need advice on best method to decode/transmit signal from generic remote.

no FCC-ID On Thursday, October 31, 2024 at 4:04:42 pm UTC-4 W8RIT wrote: Did you check for the FCC ID

unread,

Need advice on best method to decode/transmit signal from generic remote.

no FCC-ID On Thursday, October 31, 2024 at 4:04:42 pm UTC-4 W8RIT wrote: Did you check for the FCC ID

Oct 31

Adam Tytel (adman120), … Greg Troxel3

Oct 30

Very basic question

"Adam Tytel (adman120)" <tytel...@gmail.com> writes: > I was pumped when I

unread,

Very basic question

"Adam Tytel (adman120)" <tytel...@gmail.com> writes: > I was pumped when I

Oct 30

Paul Maine, Christian Z.5

Oct 28

RTL_433 ISM and 2.4 Ghz?

Thank you very much! On Monday, October 28, 2024 at 2:11:04 PM UTC-4 Christian Z. wrote: rtl_433

unread,

RTL_433 ISM and 2.4 Ghz?

Thank you very much! On Monday, October 28, 2024 at 2:11:04 PM UTC-4 Christian Z. wrote: rtl_433

Oct 28

Greg Troxel, Christian Z.3

Oct 27

release is overdue

I have updated 3 systems to 0b426692 and they seem to work ok. So I'm good with releasing that

unread,

release is overdue

I have updated 3 systems to 0b426692 and they seem to work ok. So I'm good with releasing that

Oct 27

Paul Maine, Christian Z.2

Oct 20

Zadig?

Yes, on Windows you need to setup drivers with Zadig prior to any RTL-SDR use.

unread,

Zadig?

Yes, on Windows you need to setup drivers with Zadig prior to any RTL-SDR use.

Oct 20

Paul Maine, Christian Z.2

Oct 20

Nightly Build Question

There a number of new decoders in the nightly build, yes. It's stable too.

unread,

Nightly Build Question

There a number of new decoders in the nightly build, yes. It's stable too.

Oct 20

Ghulam Umar, Christian Z.4

Oct 8

Data not making sense

A noise floor of -42 dB is dead silence for an RTL-SDR. This should not happen. For signals with

unread,

Data not making sense

A noise floor of -42 dB is dead silence for an RTL-SDR. This should not happen. For signals with

Oct 8

Era James, Christian Z.2

Oct 8

KV encoding differance in csv vs stdout

The kv ouput is prettified to display values more like they would appear on a console or the handbook

unread,

KV encoding differance in csv vs stdout

The kv ouput is prettified to display values more like they would appear on a console or the handbook

Oct 8

Guy

Oct 6

Holman Helios weather station decoded fields

I've recently had success decoding the signals from a Holman Helios weather station, I'm

unread,

Holman Helios weather station decoded fields

I've recently had success decoding the signals from a Holman Helios weather station, I'm

Oct 6

Can Cunia, Christian Z.8

Oct 2

RTL_433 Stalling on Startup

Thanks for the replies. I think one part of the problem may be due to USB power. It seemed to work a

unread,

RTL_433 Stalling on Startup

Thanks for the replies. I think one part of the problem may be due to USB power. It seemed to work a

Oct 2

David Ackrill, … David Cooley14

Oct 1

Adding sensors

That PLL not locked error is coming before a frequency is set. The PLL, once the frequency is set,

unread,

Adding sensors

That PLL not locked error is coming before a frequency is set. The PLL, once the frequency is set,

Oct 1

Harpalyke, Christian Z.5

Oct 1

Unable to read data output from Watchman Sonic Advanced

Thanks, Christian. I had seen some comments about interference from the chip for the USB port so

unread,

Unable to read data output from Watchman Sonic Advanced

Thanks, Christian. I had seen some comments about interference from the chip for the USB port so

Oct 1

Puterboy, Brian Dunstan3

Sep 27

Reversing decoder to generate (aka "spoof") transmittable signals

So cool! First, are you willing to share your code on how you capture the codes and translated them

unread,

Reversing decoder to generate (aka "spoof") transmittable signals

So cool! First, are you willing to share your code on how you capture the codes and translated them

Sep 27

Puterboy, Christian Z.2

Sep 27

LaCrosse-TX141THBv2 sensors report constant humidity 10%

Humidity is just a single plain byte on those messages: https://github.com/merbanan/rtl_433/blob/

unread,

LaCrosse-TX141THBv2 sensors report constant humidity 10%

Humidity is just a single plain byte on those messages: https://github.com/merbanan/rtl_433/blob/

Sep 27

Andrew Parnell, Christian Z.3

Sep 10

Repeats coming in as multiple frames.

Thought that might be the problem but couldn't figure out how to verify that. Understood. Thanks!

unread,

Repeats coming in as multiple frames.

Thought that might be the problem but couldn't figure out how to verify that. Understood. Thanks!

Sep 10

md, Christian Z.8

Sep 9

Difference between triq.org decoding and flex decoder in CLI

Very satisfied with the evening spent :-D daubsi@skywatch:~/rtl_433_dev/build $ ./src/rtl_433 -R 260

unread,

Difference between triq.org decoding and flex decoder in CLI

Very satisfied with the evening spent :-D daubsi@skywatch:~/rtl_433_dev/build $ ./src/rtl_433 -R 260

Sep 9

Greg Troxel, … Benjamin Larsson3

Sep 9

sdrplay rsp1a and rtl_433

On 09/09/2024 18:34, Christian Z. wrote: > Note that this is just my very biased personal view due

unread,

sdrplay rsp1a and rtl_433

On 09/09/2024 18:34, Christian Z. wrote: > Note that this is just my very biased personal view due

Sep 9

Cezar Burlacu2

Sep 8

TPMS sensor recommendation

FWIW, I bought SCHRADER 2200-GO1 sensor and without reprogramming it is working with rtl_433 latest

unread,

TPMS sensor recommendation

FWIW, I bought SCHRADER 2200-GO1 sensor and without reprogramming it is working with rtl_433 latest

Sep 8

Rob Boux, … Christian Z.6

Sep 6

Debian 11/bullseye

Thanks for the report! On older hardware you might want to reduce CPU load by not processing "

unread,

Debian 11/bullseye

Thanks for the report! On older hardware you might want to reduce CPU load by not processing "

Sep 6

Anthony Gossner2

Aug 19

Sonoff RM433 Unraid

Turns out I needed to pass -c /etc/rtl_433/rtl_433.conf in my templates post arguments. On Friday,

unread,

Sonoff RM433 Unraid

Turns out I needed to pass -c /etc/rtl_433/rtl_433.conf in my templates post arguments. On Friday,

Aug 19